Top Servo To Spi Converter Board

Adafruit 4201 Airlift – ESP32 WiFi Co-Processor Breakout Board

• a breakout board that lets you use the powerful ESP32 as a WiFi co-processor..
• Having WiFi managed by a separate chip means your code is simpler,.
• Send basic but powerful socket-based commands over 8MHz SPI for high speed data transfer.
• We placed an ESP32 module on a PCB with level shifting circuitry, a 3.3V regulator, and a tri-state chip for MOSI so you can share the SPI bus with other devices.

Geniatech XPI-3288 Android Single Board Computer Development Board Moudle,Rockchip RK3288 Quad Core CPU 2G RAM, 16GB EMMC Flash Motherboard

• Card-sized High Performance Board, Rockchip RK3288 with Quad-core Cortex-A17 up to 1.6GHz, 2G RAM, 16GB eMMc flash, faster read / write speeds for the OS, applications and file storage.
• 4*USB2.0, 1*HDMI Out, 1*Micro USB, 1*UART, 1*GPIO interface, WiFi and 1000M LAN interface, Micro SD card (TF card : Max64G).
• Multiple DIY use Single Board Computer, use the Form Factor of Raspberry Pi, DIY Friendly Design: 40 Pin GPIO header with I2S, I2C, SPI, UART, etc.
• According to the definition of Raspberry Pi, which is suitable for the field of programming education for teenagers.
• Compatibility and Extensibility: 40 Pin header enables hardware re-use by maintaining compatible alternate pin functions like I2S, I2C, SPI, UART, and so on.

Loulensy AC Current Transducer Sensor Split Core Transformer 0-10A,20A,50A Output 0-5V UL&CSA,CE&Rohs

• Current sense module with a 12-bit analog-to-digital converter.
• Quick, accurate, and easy to use for a variety of applications.
• Follows the Pmod Standard and uses a simple SPI interface.

HiLetgo BMI160 6-axis Palstance Accelerometer Gyroscope Gravity Sensor PMU I2C SPI for Arduino Walking Step Acceleration Detection DIY

• BMI160 6-axis Palstance Accelerometer Gyroscope Gravity Sensor.
• Communication: standard IIC / SPI communication protocol.
• Chip built 16 bit AD converter, 16-bit data output.

AITRIP 3pcs MPU9250 BMP280 GY-91 10DOF Acceleration Gyroscope Compass Nine Shaft Sensor for Arduino 3-5V

• Built-in 16bit AD converter chip, 16bit data output.
• Power supply: 3-5v (low dropout internal regulator).
• Communication: IIC / SPI standard communication protocol.
• MPU9250 + BMP280 module (Three-axis gyroscope + triaxial accelerometer + triaxial magnetic field + pressure).

DIYmall 10pcs 10cm 3.93inch Male to Male JR Plug Servo Extension Lead Wire Cable 3Pin 100mm for RC Plane

• 10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
• Great for jumping from board to board or just about anything else..
• There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
• Length:100mm Type:JR Plug Servo Extension wire (Male to Male).

Geekworm for Raspberry Pi 4 Model B, 3.5 inch Touch Screen with ABS Case and Pi 4 Heatsinks Kit, Max 50FPS 480x320 Pixel Monitor TFT Touch LCD (Support Raspbian, Ubuntu, Kali, Retropie System)

• For the document and download information, refer to Geekworm WiKi search (3.5_LCD_B)..
• Note: 1. The Raspberry Pi 4B mother board and cooling fan is not included in all the packing list. 2. The black ABS case only suitable for this 3.5 inch screen with Raspberry Pi 4 Model B, do not support other Raspberry Pi versions. Not support install cooling fan..
• Physical resolution 320 x 480, with resistive touch control.
• it supports up to 125MHz SPI signal input, showing stable and no flicker.
• Support Raspbian/Ubuntu/Kali/Retropie system, provide driver and image, please refer to WiKi(user manual)..
• LCD Interface: SPI (up to 125MHz SPI input, Max FPS: 50Mhz).

HiLetgo 2.2 Inch ILI9341 SPI TFT LCD Display 240x320 ILI9341 LCD Screen with SD Card Slot for Arduino Raspberry Pi 51/AVR/STM32/ARM/PIC

• Durable hard PCB board and SD card socket, ideal for 5110 interface.
• 2.4 inch TFT LCD shield without touch panel, fast to operate.
• Support Serial SPI Mode, Interface 4-Wire SPI, Need 4 IOs from your MCU only.
• Support a variety of microcontroller IO connection, professional and practical.
• 5V compatible, use with 3.3V or 5V logic.

Sony CDP-CE335 5-CD Changer Discontinued by Manufacturer

Sipeed Lichee Nano ARM Single Board Computer Allwinner's F1C100s Support Linux, Xboot, RT-Thread RTOS & Melis OS

• Lichee Nano is a mini development board designed based on Allwinner's F1C100s (ARM 926EJS core) high-performance SOC chip. Onboard USB, Flash, TF card and 40P LCD interface, suitable for beginners to learn Linux or commercial product development.
• F1C100s chip has built-in 32MB DDR, has SDIO, SPI, UART, Speaker, Mic and other interfaces, and supports external 8~32MB SPI Nor Flash.
• Applications in time attendance and access control, autonomous driving, smart robots, Internet of Things, smart wear and smart home.

6Pcs ShareGoo JR Style Servo Splitter Cable, 2.75' Servo 1 Male to 2 Female JR Y Harness Y Cable Extension Wire for RC Models Car Airplane Helicopter Drone Boat

• Used for RC cars trucks airplanes helicopters rc boat servo connection, receiver connection and flight control board..
• This servo Y-cable allows you to control two servos with one radio channel..
• Material: 22AWG silicone wire.Wire Length: 7CM/2.75".
• 3Pin wire cable.Male JR plug to 2 Female JR plug Y Harness cable..
• Pack of 6 JR style servo splitter cable,unique design, professional quality JR style connectors..

BIGTREETECH SKR V1.4 Turbo Control Board 32bit for 3D Printer Compatible with TFT35 E3 V3.0.1/TFT70 Touch Screen Support TMC2209/TMC2208/TMC5160/TMC2130 for Most FDM 3D Printer (with 5*TMC2209)

• ✨BIGTREETECH SKR V1.4 Turbo using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved..
• ✨SKR V1.4 Turbo control board can supply power to TFT screen, BLtouch, Neo-pixel by plugging in an external DC5V power module.
• in addition, I2C, SPI, WIFI interface is reserved to facilitate customer DIY..
• ✨On-board TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap..
• ✨Compare to other stepper motor driver in the market, our TMC2209 silent stepper driver generate lower heat and it has a large-area cooling position to lower the temperature. It driver can lower 30% heat than others stepper motor drivers even working last for a long time. With Passive cooling on a 10 hours print, they only hit 37℃..
• ✨BIGTREETECH TMC2209 V1.2 is an ultra-silent motor driver IC for two-phase stepper motors, which adopts stealthChop2 Mute technology which reduces motor noise ....