Top Set Of Taps And Drills
CS Unitec 3/4' Weldon Tap Holder for 3/4' Diameter Taps - Mag Drill Tap Collet - Fits Standard Weldon Chucks On Most Magnetic Drill Presses (TCM 3/4)
- FAST TAPPING: Adapter for 3/4" diameter taps, fast changeout. Tap chuck collets available for holding up to 3/4" diameter taps..
- NO SPECIAL TOOLING NEEDED: Collets fit standard tap shanks. Can be used with variable speed, reversible and other mag drills..
- 3/4" WELDON SHANK: Fits most mag drill chucks. Industry standard, 2 flat shank..
- COMPACT: For easy transport, storage and use without impact on magnetic drill stroke..
- HEAVY DUTY: High quality, long lasting, professional grade, Made In Germany. Recommended use with MAB 465 magnetic drill (ASIN B08QGSPFDD).
Check StockAcrux7 14mmx1.5 HSS Right Hand Thread Tap, Metric Thread Tap, Thread Milling Tap M14 X 1.5mm Pitch
- 【MATERIAL】-Made of made of high speed steel and are good for most general purpose applications,offering a combination of hardness and toughness for wear resistance.
- Standard thread design,clear and tidy,provide rapid chip removal for efficient threading.
- 【FEATURE】-Straight flute taps are used for through hole and shallow blind hole tapping.
- Adjustable forward and reverse,ratchet rotation,compact and convenient.
- 【NOTE】-Before tapping,confirm whether the diameter of the round hole is appropriate.
- If the hole is too small for tapping,the tap will wear out more unnecessary,which will increase the risk of tap breakage.
- 【APPLICATION】-The taps are used formanual equipment or special processing consoles,such as tapping machines,drill-in-one bench drills etc.
- With this tap,you can finish tapping on stainless steel,iron,aluminum,copper,general steel and other materials.
Check StockStarrett 174 Tap Wrench, No. 0-14 Tap Size, 1/4' Square Shank Diameter, 3-5/8' Body Length
- Tap wrench with 1/4" square shank turns small tools such as taps, reamers, and drills.
- Tap size capacity is Nos. 0 to 14 for industry-standard sizing.
- Grips round or square shanks for flexibility of use.
Check StockSWANLAKE 166PCS Thread Repair Tool Kit,HSS Drill Helicoil Repair Kit Metric M5 M6 M8 M10 M12
- 1.This 166pcs Thread Repair kit is for repairing damaged or stripped Internal screw threads..
- 2.Set includes :5 installation tools,5 break pin tools,5 twist drills ,5 taps,1 hex key and 145pcs wire thread inserts (M5,M6,M8,M10,M12)..
- 3. The installation tools in this kit is made by high-speed steel for superior handling.one HSS tap for each size, one HSS drill for each size, 2 Insert tools for each size, Thread Inserts for each size..
- 4.The kit has 166 Pieces, all made according to professional standard.its suitable for engine repair and other automotive applications..
- 5.It packed in a convenient steel carrying case, easy and fast in storage..
Check StockABN Professional Thread Repair Kit - 131pc SAE Drill Thread Restorer Kit for Restoring External or Internal Screw Holes
- [Restore Stripped Screws]: Repair stripped threads with the ABN Thread Repair Tool Set.
- 131pc long rethreading kit is ideal for repairing 1/4, 5/16, 3/8, 7/16, or 1/2-inch internal or external screw holes.
- [Use for Any Job]: Fix up your engine or restore automotive wear and tear with the rethreading tool kit.
- Complete any drilling, tapping, and tang removal jobs with the thread chaser set.
- [Carry With You Anywhere]: Spark plug thread chaser and bolt hole thread repair kit comes in a steel case to keep all 131 pieces neatly organized and labeled for your convenience.
- Lightweight 5lb (2.3kg) case is easy to transport between job sites and takes up little room making it easy to store.
- [Rely on Maximum Strength]: Thread fixer tools are constructed of chrome vanadium steel to withstand repeated use and to help prevent corrosion.
- Inserts are heat-treated for long-lasting strength.
- [Package Details]: Bolt thread cleaner tool standard thread repair kit includes 5 twist drills, 5 screw taps, 5 installation tools, 5 breaking pin tools, 111 thread inserts, and a carrying case.
Check StockSKILSAW 80111 Worm Drive Saw Lubricant, Black
- Multi-purpose cutting wax specially formulated to extend tool life and reduce chip welding when drilling, reaming, and threading metal. Ideal when cutting metal using twist drills, taps, annular cutters, carbide tipped hole cutters, reamers, and more.
- Provides a precision finish with closer tolerances on finished work..
- Formulated to cling to tools for a continuous shield against friction and heat.
- Effective when cutting steel, stainless steel, aluminum and many exotic alloys.
Check StockMIBRO 301360BLUE Tap Die and Drill SAE Set 26 Pieces
- Titanium coated for sharper, more precise cuts.
- Made to exact specifications from long lasting tool steel.
- Sets include prcise drills to match the taps.
- Includes: 6-32 NC, 8-32 NC, 10-24 NC, 1/4 inch-20 NC, 5/16 inch-18 NC, 3/8 inch-16 NC, 7/16 inch-14 NC, 10-32 NF.
- Also includes adjustable tap wrench and hex die holder.
Check StockTAILUG Thread Repair Kit 261-Piece HSS Drill Helicoil Repair Kit SAE & Metric 1/4 5/16 3/8 7/16 1/2 M5 M6 M8 M10 M12 with HSS Drill Threaded Inserts Screw Tap Installation and Tang Break Tool
- ...oil kit is made of high-speed steel, with better hardness and toughness after heat treatment. Chrome finish surface is for anti-rust. The thread inserts made of heat-treated 45# steel has better toughness and is not easy to wear and deformation. Extended service life..
- 【HIGH PRECISION】: 135° apex angle of twist drills, with stronger metal penetration and higher efficiency. HSS screw taps have precise screw threads, offer large chip space and small resistance during cutting. Workmanship meets and exceeds ANSI standards..
- 【PORTABLE & GUARANTEE】: Everything you’ll need for thread repairing is supplied in a durable carry case, ensuring safe storage and protection when not in use. Sizes and quantities are marked on each thread insert box inside for your convenience. TAILUG helicoil thread repair kit is overed by a warranty for 1 year. Please rest assured to buy..
Check StockIrwin Tools Tap and Drill Sets, 13-Pieces
- This tap and drill bit set produces a thread that is strong and easy to tap.
- High-carbon steel plug taps are great for general-purpose threading.
- 135° split-point drill bits give fast, precise drilling.
- Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check Stockuxcell Adjustable Tap Wrench Handle, for Metric M1-M10 W1/16-3/8 Taps, Tap Reamer Tapping Hand Tool, Medium Carbon Steel Handle with Nickel Plated
- Tap Wrench: Fit tap size: M1-M10 (Mertic)/ 1/16" - 3/8"(UNC/UNF) / 1.5mm-10mm, medium carbon steel handle with nickel plated, zinc alloy chuck with electrostatic spraying, offering high hardness and wear resistance for long service life.
- Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually.
- Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps.
- Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread.
- Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other.
Check Stockuxcell Adjustable Tap Wrench Handle for 1/16\-1/4\ (UNC/UNF) / M1-M8 Taps, Tap Reamer Tapping Wrench Hand Tool with Plastic Dipped Handle
- Tap Wrench Size: Fit tap size: 1/16"-1/4" (UNC/UNF) / M1-M8 (Metric). Black oxide coating for good abrasion resistance and rust protection. Hardened carbon steel sliding block for high hardness and strength..
- Wide Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually..
- Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially suitable for larger-diameter taps..
- Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread. Plastic dipped handle provides firm and comfortable grip in use when exposed to fluid or moisture..
- Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other..
Check StockDrill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
- Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
- The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
- The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
- 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock