Top Sf6 Load Switch

LINEAR GoControl WS15Z-1 Zwave Wall Mount Switch,White,Small

  • Z-wave & Manual Control For Connected Lights.
  • 960w (8a) Max Incandescent Load, 1,800w (15a) Max Resistive Load, For Dual-switch 3-way Applications.
Check Stock

BMPCC D-Tap to 4K 6K Pro Power Cable Suitable for Blackmagic Pocket Cinema Camera 4K and Gold Mount V Mount Battery，Weipu SF6 2 Pin Female to P Tap，18 inch - 59 inch Length

  • D-Tap (P-Tap) Power cable suitable for the new Pocket 4K Camera from BMD.
  • Plug A: Weipu SF6 2 Pin Female Plug. Plug B: Standard male D-Tap..
  • The Min length is about 15inches (45cm). The Max length is about 59 inches (150cm)..
  • Power D-Tap outputs, Coiled power cable for a flexible reach and neat setup..
  • Easy to use: Power D-Tap outputs, Coiled power cable for a flexible reach and neat setup..
Check Stock

Weapon Rifle Light

  • Rifle Light - The rifle light generates 400 Lumens of blinding white light..
  • Weapon Light - The weapon light provides constant white light and momentary illumination by remote pressure switch. You can switch easily as your....
  • Mlok Flashlight - Mlok flashlight was made of aircraft-grade aluminum alloy with black anodized matte finish. Lightweight design, perfect for self....
  • Picatinny Flashlight - 20mm picatinny rails mount provided allow you to install the picatinny flashlight on the rifle,airsoft,shortgun etc inforce....
  • How to load battery? - Load 2* CR123A battery(battery Not Included) from the head of the tactical flashlight..
Check Stock

Dayton 1UHH4 Line Voltage Control, Heat, Cool, Analog

  • Price For: Each Cooling Full Load @ 120V: 13.8A Voltage Range: 110 to 125VAC Enclosure Type: Steel Color: Black Switch Action: Close On Rise Includes: 6 ft. Cord Standards: ETL C/US Switch Type: SPST Number of Switches: 1 Sensor Type: Bi-Metal Height: 5-1/2" Features: HSJ Cord with Piggyback Plug, Mount with Suspension Chain or Wire.
  • Control Range: -10 Degrees to 100 Degrees F Differential: 6 to 8 Degrees F Full Load Amps: 13.8A Number of Relay Inputs: 1 Number of Relay Outputs: 1 Input Voltage: 120VAC Locked Rotor Amps @ 120V: 58.8A Application: Cooling Only Inductive Amps @ 120V: 13.8A Cooling Locked Rotor @ 120V: 58.8A Contact Rating Resistive @ 120V: 13.8A Mounting Type: Suspension Chain or Wire Item: Line Volt Mechanical Tstat.
  • Full Load Amps @ 120V: 15A Depth: 2" Width: 2-1/2" Number of Stages: 1 Country of Origin (subject to change): China.
Check Stock

Metabo HPT NV65AH2 Siding Nailer w/Air Hose

  • SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4".
  • SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch.
  • EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads.
  • LIGHTWEIGHT: 40% lighter than PVC and is spiral reinforced for increased durability.
  • STRENGTH: Handles 300 PSI with a 3-to-1 burst ratio.
Check Stock

UltraPro Z-Wave Smart Toggle Light Switch with QuickFit and SimpleWire, 3-Way Ready, Compatible with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White, 39354

  • Revolutionary, Patent-Pending Design – QuickFit and SimpleWire technologies offer groundbreaking home automation features. Unique advancements make the smart controls easier to install and more reliable than ever..
  • QuickFit – Improved components reduced the housing depth by up to 20 percent compared to previous Z-Wave models and eliminated the need for heat tabs. QuickFit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space..
  • SimpleWire – Auto-detecting line/load terminals support fast installation by identifying line and load wires and configuring the switch accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups..
  • Optional toggle guide light – The white, toggle-style switch illuminates to show switch location and status. A blue LED backlight provides a soft glow and can be reversed, turned off or always on based on your indicator preferences..
  • Voice control – Enjoy the convenience of voice control with Google Assistant or Amazon Alexa when connected through a compatible Z-Wave hub..
Check Stock

Nortek GoControl WD500Z5-1: Z-Wave Wall Dimmer Switch 500W 908.42 MHz 120VAC 15A

  • ...Mounted Dimmer integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range)..
  • Replaceable Trim Ring The WD500Z5-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory. Auto-Sense: Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status..
  • Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles) Signal (Frequency): 908.42 MHz Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Input: 120v 15A 60Hz.
  • Network wide inclusion Scene: Command class Security beaming Requires a Neutral Auto-Sense feature built-in Replaceable trim ring design.
  • Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Nortek Security & Control products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilize....
Check Stock

The Cobra Event: A Novel

  • ...n to under 0.3 percent at no load and under 1.2 percent at full load, making it safe to run laptops, cellphones, monitors, tablets and other sensitive electronics.Includes two three-prong 120V receptacles, one 12V DC receptacle, two 5V USB ports, and a two-year warrantyMaximize fuel economy by engaging the eco-mode switch. This allows the generator's engine to automatically adjust its fuel consumption as items are plugged into and unplugged from the panel, preventing the unnecessary usage of gasoline..
  • Extremely quiet operation comparable to the sound of a normal conversation according to the US Department of Health and Human Services.
  • Produces 2350 surge watts and 1900 rated watts of clean power for safe charging of sensitive electronics (phones, tablets, televisions, computers, etc.).
  • Our 79cc 4-stroke OHV engine operates at an extremely quiet 51 decibels at quarter load, quieter than a window air conditioner or the average conversation..
  • Fuel shutoff maximizes the generator’s lifespan by using up the remaining fuel in the carburetor before shutting down.
  • Designed to mirror a pure sine wave, this generator limits total harmonic distortion to under 0.3 percent at no load and under 1.2 percent at full load, making it safe to run laptops, cellphones, mon....
Check Stock

Enbrighten Z-Wave Smart Rocker Light Switch, 3-Way Ready, Works with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White & Light Almond, 46201 + 1 Add-On Rocker Switch 46199

  • ...ertified gateway. Supported voltage - 120VAC. Wireless range: Up to 150 feet.
  • SPACE-SAVING HOUSING DESIGN – Improved components reduced the housing depth by up to 20 percent compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space..
  • EASY INSTALLATION WITH SIMPLE WIRE – Auto line-load sensing terminals on the switch support fast and easy installation by detecting line and load wires and configuring the switch accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups..
  • REQUIRES A Z-WAVE CERTIFIED GATEWAY – Compatible with the following Z-Wave certified hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and Connect. Works with Alexa for voice control (hub required.
  • ALL-IN-ONE BUNDLE – Everything necessary to transform a traditional 3-way switch to a smart switch is included in the kit. The Enbrighten-branded Add-on Switch allows the Enbrighten-branded Z-Wave Smart Switch to operate correctly in multi-switch insta....
Check Stock

Smart Dual Dimmer Compatible with Alexa and Google Home, Single-Pole WiFi Smart Light Switch with Timer Remote and Voice Control, Neutral Wire Required,2Pack

  • Dual Dimmer Space-Saving - This Powerful tuya smart dimmer switch makes it possible to control two lights separately at the same time, double dimmer in one switch lets your home design more simple and graceful.This smart Wi-Fi switch is compact and space-saving, it is a great solution for stacked switches commonly found in kitchens and bathrooms..
  • Timming & Scheduling- The stacked switches set timer or countdown schedules to make your lights automatically turn on/ off while you're home or away. Have a smart home and create a customized schedule to automatically turn on/off lights, any home lamps, electricity, etc..
  • oice & Remote Control-Our tuya Dual smart light switch works with Alexa and Google Home Assistant, just speak a simple voice command to control your home devices.No Hub or subscription required..
  • Family Group Share-Set a group for all smart devices, include this dimmer switch, and control them in one command. Share your wifi switch to all family members in a minute. Meanwhile, you all can create various scenes for get up, sleep and so on..
  • Note- Neutral, Live, Load Wires are Required to Dual Dimmer Power Switch. Without Load/ Neutral, Please DO NOT Purchase. The alexa smart dual dimmer switch works in a single-pole setup only (Not 3-way). This....
Check Stock

UltraPro Z-Wave Smart Rocker Light Switch with QuickFit and SimpleWire, 3-Way Ready, Works with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White Paddle Only, 4-Pack, 54891

  • Revolutionary, patent-pending design – QuickFit and SimpleWire technologies offer groundbreaking home automation features. Unique advancements make the smart controls easier to install and more reliable than ever..
  • QuickFit – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. QuickFit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space..
  • SimpleWire – Auto-detecting line/load terminals support fast installation by identifying line and load wires and configuring the switch accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups..
  • Voice control – Enjoy the convenience of voice control with Google Assistant or Amazon Alexa when connected through a compatible Z-Wave hub..
  • Switch upgrade – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF and create schedules for a wide range of fixtures..
Check Stock

Enbrighten Z-Wave Smart Toggle Light Switch, 3-Way Ready, Compatible with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White, 46202 + 1 Add-On Toggle Switch 46200

  • ...ertified gateway. Supported voltage - 120 VAC. Wireless Range: Up to 150 feet.
  • SPACE-SAVING HOUSING DESIGN –Improved components reduced the housing depth by up to 20 percent compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space..
  • EASY INSTALLATION WITH SIMPLE WIRE – Auto line-load sensing terminals in the switch support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups..
  • REQUIRES A Z-WAVE CERTIFIED GATEWAY - Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required.
  • ALL-IN-ONE BUNDLE – Everything necessary to transform a traditional 3-way switch to a smart switch is included in the kit. The Enbrighten-branded Add-on Switch allows the Enbrighten-branded Z-Wave Smart Switch to operate correctly in multi-switch i....
Check Stock