Top Sff Psu Dimensions

Oeveo Side Mount 143-10H x 4.5W x 12D | Computer Wall Mount for SFF Desktop Computers SCM-143

  • Designed to mount your Desktop Computer, PC, CPU, Workstation, Computer Tower, UPS Unit, or Uninterruptible Power Supply Unit. The Computer Side Mount....
  • Side Mount 143 Specifications - Dimensions: 10" Height x 4.5" Width x 12" Depth. Made of 14GA Cold Rolled Steel. Powder Coated Flat Black. Model ID:....
  • Quick, easy, and simple installation. All mounting hardware included: four Black 1-1/4" Screws and four Wall Anchors provided..
  • BEST USES: Computer Mount, PC Mount, CPU Mount, Workstation Mount, Computer Tower Mount, Computer Wall Mount, Small Form Factor Computer Mount, HP....
  • TESTED COMPATIBLE MODELS: HP Models - EliteDesk SFF - 705 G3, 705 G2, 800 G2.
Check Stock

Silverstone Tek Micro-ATX Desktop Computer Case with Two USB3.0 Front Ports Case SG02B-F-3.0-USA

  • Enhanced cooling layout for high performance.
  • Dual 5. 25-Inch and 3. 5-Inch drive bays.
  • Micro ATX Motherboard & ATX PSU compatible.
  • Extended - length expansion cards support.
Check Stock

Silverstone Tek Micro-ATX, Mini-DTX, Mini-ITX Small Form Factor Computer Case, Compatible with ATX PSU Cases SG11B

  • Ample space for CPU cooling (82mm in height).
  • Micro ATX motherboard & ATX PSU compatible.
  • Cleanly styled SFF chassis with modernized layout.
Check Stock

SilverStone Technology Micro-ATX Small Form Factor with Aluminum Front Panel Computer Case Gaming SST-SG12B-V2-USA

  • Built-in handle bar design for Easy transport.
  • Ample space for CPU cooling (82mm in height).
  • Micro ATX Motherboard & ATX PSU compatible. Amazing capacity for 2.5” drives.
  • Cleanly styled SFF chassis with modernized layout.
Check Stock

Oeveo Under Mount 242-12W x 4H x 11D | Under Desk Computer Mount for Small Form Factor SFF Computers | UCM-242

  • Designed to mount your Desktop Computer, PC, CPU, Workstation, or Computer Tower. The Computer Under Mount allows you to mount your computer....
  • Under Mount 242 Specifications - Dimensions: 12" Width x 4" Height x 11" Depth. Made of 16GA Cold Rolled Steel. Powder Coated Flat Black. Model ID:....
  • Quick, easy, and simple installation. All mounting hardware included: four Black 1-1/4" Screws, and four Wall Anchors provided..
  • TESTED COMPATIBLE MODELS: HP - ProDesk 400 G3 SFF PC, 280 G2 SFF PC, IdeaCentre 300s 8L.
  • DELL - OptiPlex SFF - 3040, 3046, 3050, 5040, 5050, 7040,....
Check Stock

EDIMS Mini SAS to SAS Cable Internal Breakout Cable SFF-8087 to SFF-8482 with 4X Molex Power Connectors for Raid Controller to Hard Drive 3.3FT

  • Internal Mini SAS SFF-8643 to (4) 29pin SFF-8482 connectors with power connecting a SAS controller (SFF-8643) to four SATA/SAS disks (SFF-8482).
  • Please note that Mini SAS (SFF-8643) is host, 4 SAS 29 (SFF-8482) is target, internal Mini Serial Attached SCSI x4 (SFF-8643) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
  • Before you buy this cable, Please make sure the Mini SAS (SFF-8643) on your motherboard or RAID controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
  • Mini SAS (SFF-8643) connect to the controller, 4 SAS connect to the HDD (hard disc driver).
  • 30-Day return for any reason, 18-month warranty, Lifetime Technical support and friendly customer service.
Check Stock

DiLinKer M.2 to U.2 SFF-8639 PCIe NVMe SSD Cable- PCIe NVMe U.2 SFF-8639 Drive to M.2 Host Adapter-U.2 SSD Converter -with Power  Cable 50CM

  • U.2 to M.2 cable for data and power delivery to U.2/2.5” PCIe devices.
  • Supports drives that require 12V source. Requires external PSU SATA power connector..
  • 18” for flexibility of mounting U.2/2.5” drives in drive bays..
  • Shielded for support of reference clock..
  • PCIe NVMe U.2 (SFF-8639) Drive to M.2 Host Adapter.
Check Stock

ANNNWZZD Internal Mini SAS Cable,SFF8087 36 Pin to SFF8087 36Pin Data Cable,Mini-SAS to Mini-SAS Cable (3FT/1M)

  • 【Kindly Reminder】Please note: this cable can ❌ Not work with SAS Driver. Internal Mini SAS 36pin SFF-8087 to (4) 29pin SFF-8482 connectors with SATA Power.
  • 【Mini SAS to SAS Cable】Mini SAS 36 pin (SFF-8087) connect to the controller, 4 x SAS connect to the HDD (Hard Disc Driver).
  • 【36 Pin to 29 Pin Cable】Mini SAS 36 pin is Host, 4 x SAS 29 pin is target, Internal mini Serial Attached SCSI x 4 (SFF-8087) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
  • 【Controller to SATA Disks】Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482).
  • 【What You Get】1 x 3.3 FT CableCreation SFF-8087 to SFF-8482 Cable. Backed with 24 Months Warranty and lifetime technical service.
Check Stock

A-Tech 4GB RAM Stick for Dell OptiPlex 9010, 7010, 3010, 990, 980, 790, 390, DT/MT/SFF/USFF - DDR3 1333MHz PC3-10600 Non-ECC DIMM Memory Module

  • Compatible with Intel 1st Gen i3/i5/i7/Pentium, 2nd Gen i3/i5/i7/Pentium/Celeron, & 3rd Gen i3/i5/i7 CPU Processors *Intel 2nd Gen Pentium G600 series & Intel 2nd Gen Celeron processors will run memory at 1066MHz*.
  • Designed for Dell OptiPlex Models: 9010 (MT/DT/SFF/USFF), 7010 (MT/DT/SFF/USFF), 3010 (DT/MT/SFF), 990 (MT/DT/SFF/USFF), 980 (MT/DT/SFF), 790 (MT/DT/SFF/USFF), 390 (MT/DT/SFF) – MT (Minitower), DT (Desktop), SFF (Small Form Factor), USFF (Ultra Small Form Factor).
  • 2Rx8 1.5V 240-pin Non-ECC Unbuffered DIMM (Non-ECC UDIMM).
  • 4GB (1 Stick of 4GB) DDR3 1333MHz PC3-10600 RAM Memory Module.
  • Genuine A-Tech Brand – Lifetime Warranty – Toll Free Technical Support.
Check Stock

A-Tech 8GB RAM Stick for Dell OptiPlex 9010, 7010, 3010, 990, 790, 390, DT/MT/SFF/USFF - DDR3 1333MHz PC3-10600 Non-ECC DIMM Memory Module

  • Genuine A-Tech Brand – Lifetime Warranty – Toll Free Technical Support.
  • Compatible with Intel 2nd Gen i3/i5/i7, Pentium, Celeron, & 3rd Gen i3/i5/i7 CPU Processors *Intel 2nd Gen Pentium G600 series & Intel 2nd Gen Celeron processors will run memory at 1066MHz*.
  • Designed for Dell OptiPlex Models: 9010 (MT/DT/SFF/USFF), 7010 (MT/DT/SFF/USFF), 3010 (DT/MT/SFF), 990 (MT/DT/SFF/USFF), 790 (MT/DT/SFF/USFF), 390 (MT/DT/SFF) – MT (Minitower), DT (Desktop), SFF (Small Form Factor), USFF (Ultra Small Form Factor).
  • 8GB (1 Stick of 8GB) DDR3 1333MHz PC3-10600 RAM Memory Module.
  • 2Rx8 1.5V 240-pin Non-ECC Unbuffered DIMM (Non-ECC UDIMM).
Check Stock

CableCreation 6.6FT External HD Mini SAS SFF-8644 to SFF-8644 Cable, 2M/ Black …

  • Target: SFF-8482 SAS connector,each with data and power,mainly used for SAS hard disk,connecting SAS/SATA hard disk.
  • Supports up to 6Gbps throughput per channel.
  • Internal miniSAS SFF-8087 to (4) SFF-8482 connectors with SATA power power..
  • This mini SAS cable allow you to connect from a SAS controller with SFF-8087 internal miniSAS connector to four (4) SAS hard drives..
Check Stock

CableCreation Internal HD Mini SAS (SFF-8643 Host) - 4X SATA (Target) Cable,SFF-8643 to 4X SATA Cable, SFF-8643 for Controller, 4 Sata Connect to Hard Drive, 1M / 3.3FT

  • [ SFF-8643 Cord ] The SFF-8643 is the latest HD Mini SAS connector design for implementing HD SAS Internal interconnect solutions..
  • [ High Data transfer] 36 pin High Density (HD) Mini SAS SFF-8643 Internal cable assemblies are available for SAS 2.1, 6Gb/s and SAS 3.0, 12Gb/s specification. Hybrid versions of these new cables will allow for a smooth transition from 6Gbps to 12Gbps.
  • SFF-8643 is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices.
  • [ SFF-8643 Port ] SFF-8643 interface is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. It support up to 4-ports (4 lanes) of SAS data and is compliant with the latest SAS 3.0 spec.
  • [ What You Get] 1 x CableCreation 3 FT Mini SAS SFF-8643 Cable. CableCreation provide 24 Months Warranty and lifetime Technical Service.
Check Stock