Top Sheet Metal Shrinker Jaws

MacWork Locking Sheet Metal Clamps 10in.(250mm) Welding Locking Plier Tools Adjustable Opening

  • Classic trigger release designed to provide maximum locking force.
  • Made of high-grade alloy steel for maximum toughness and durability.
  • Ideal for bending, forming and crimping sheet metal.
  • Quick release lever designed to provide maximum locking force.
  • Turn screw adjustment to adjust pressure and fit work. Wide opening jaws provide greater versatility.
Check Stock

Felled Timber Claw Hook, 28in - Log Lifting Tongs Heavy Duty Grapple Timber Claw, Lumber Skidding Tongs Logging Grabber

  • ...ant high-grade synthetic metal ensuring a strong traction.
  • Self-adjusting Gripper Clamp - Golablatt panel lifter features the firmly durable, impact-resistant fiberglass with rubberized TPU gripping pads mounted on both clamping plates increased friction of contact to prevent slipping and protect the surfaces of the sheet from being damaged.Suitable panel thicknesses up to 3/4 inch thick.
  • Safe & Energy-efficient - The weight is distributed evenly when the carrying clamp handle is placed centrally on the panel. The clamp grips tight as you lift. It allows you to lift and move sheet with a straight back, eliminating the requirement of bending over to get under the bottom. Less weight pressure with this tool and greatly reduced risk of injury to the back, neck, shoulders and arms.
  • Goldblatt Soft-Grip Handles - Ergonomic soft-grip handle that makes carrying sheets effort lessly and it easy for a single person to carry full sheets of material with only one hand. It can hold up to 2 panels at once, single accommodating loads of up to 100 pounds.
  • Professional Grade - Use the Goldblatt gripper to grip and carry MDO or MDF panels, drywall, plywood, tabletops, sheep metal, OSB, melamine and other sheet goods.
Check Stock

ENGINEER NS-06 Precision Mini Side Cutter, Micro Nippers, Professional Grade, ESD Safe with Hardened Carbon Steel Undercut Jaws ideal for work on PCB

  • CUT CAPACITY OF TIN SNIPS: Cuts up to 18GA (1.2mm) cold-rolled steel or 22GA (0.7mm) stainless steel..
  • EASE OF USE: Spring-assisted latch on metal snips for fast one-handed operation.
  • DURABILITY: Induction hardened cutting edge on snips for sheet metal stays sharp longer (compared to non-induction hardened jaws)..
  • 1/4-inch blade markings for quick precise cuts.
Check Stock

OTC 4579 9-Way Slide Hammer Puller Set , Black

  • OTC's 9-Way Slide Hammer Puller Set is ideal for pulling flange-type rear axles and most front-wheel drive hubs.
  • Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals.
  • Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.
  • Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.
  • Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments.
  • Enjoy special OTC Tools promotions, offers, and exclusive product rebates on auto tools – see more details in the offer flyer in the photos section of this listing.
Check Stock

MAXPOWER 4PCS Locking Pliers Clamp Set, 7 inch 90 degree Offset Locking Pliers, 7 inch Locking Pinch Off Pliers, 9 inch U Shaped Jaw Locking Pliers, 8 inch Locking Sheet Metal Clamp

  • 90° Jaw left angle locking pliers x 7" Length, Max opening capacity 2-3/4" (70mm), Throth Depth 2-3/4" (70mm), Long nose jaw make clamping and holding parts, nuts and bolts easier access into narrow and deep tight space.
  • Locking Sheet Metal Clamp x 8" Length, Clamping range of 1-3/16" mm (30mm), For tightening, bending and crimping thin sheet steel.
  • U-shaped Welding Pliers x 9" Length, Clamping range of 2-5/16" (60mm), For clamping profiled, pipes or flat material.
  • Locking Pinch Off Pliers x 7" Length, pinch-off and locks on to tubing, suit for blocking flow of gas, Use only to pinch off soft copper, aluminum or any soft metal tubing.
  • There's a hex Hole on knurled thumb screw for using with hex keys( NOT included ), Offering more tightens to adjust pressure and draw materials together.
  • MAXPOWER Locking welding pliers and clamps set, Constructed with chrome-vanadium steel jaws with nickel plated finish.
Check Stock

MAXPOWER 3 Piece Locking Pliers Set

  • SIZES INCLUDED – 6 inch Long Nose Locking Pliers, 10 inch Wide Open Locking Pliers and 7 inch Offset Locking Pliers.
  • WIDE OPEN LOCKING PLIERS - One pliers for all clamping job. Up to 2 inch (50 mm) clamping capacity, ideal for pipes and large objects.
  • OFFSET LOCKING PLIERS - 90 degree angle head, long jaws reach into tight spaces to pick and grip tiny parts.
  • LONG NOSE LOCKING PLIERS - Straight jaw with curved profile section reaches into narrow spaces and holds round, hex, and square shapes, flat stock, and sheet materials.
  • LONG-TERM RELIABILITY – Jaws made of Cr-V steel with sharp teeth provide a sure bite.
Check Stock

TRISENSE 6' Vise Jaws with Strong Magnetic, Universal Soft Vice Jaws Pads Covers, Multi-Purpose Protector for Any Metal Vice,2 pcs,Golden

  • PERFORMANCE: Aluminum 6" Vise Jaws can use on any metal Vise for holding wood, metal, plastic, tubing, threaded items safely to protect any product flat or round..
  • APPLICATION: The magnetic Vise jaws are great with variety of vices, including vice block, bench vices, mill clamps, drill press vices and so on..
  • ADVANTAGE: Strong embedded magnets keep vice jaws in place securely..
  • DESIGN: Special designed V-Shaped surface and ledge can hold and protect round or hex parts and support flat parts while clamping..
  • Great for holding wood, metal, plastic. Ideal for all kinds of shop, craft, jewelry, and gunsmithing projects..
Check Stock

VAMPLIERS BRUTE 6.25\ SCREW EXTRACTION PLIERS VT-002-6: Remove Stripped/Rusted/Corroded/Stuck/Specialty Screws Nuts/Bolts/Fasteners

  • Best Made Tools VamPLIERS By Vampire Tools Inc. Offers the Best Screw Extraction Pliers Made in Japan Pliers Designed with VamPLIERS Technology. Horizontal & vertical teeth in the concave jaw grips to extract stripped screws, nuts and bolts using the top jaw or the side jaw.
  • New and Improved Model "BRUTE" from our Original Best Seller VT-001 VamPLIERS High-quality specialty pliers to extract stripped or stuck screws or rounded nuts or bolts.
  • Easily removes stripped screws, including low profile truss screws and cuts copper wires. Slender Jaws design ideal for working in tight spaces..
  • Black Oxide Finish for enhanced rust resistance. Intermeshed teeth firmly grip the finest metal sheet and shims..
  • 12mm side cutting blades. T-Shaped handles for reduced weight and slip-free grip. Securing holes run through the metal of handles for better safeguarding of pliers..
Check Stock

WORKPRO 10' Aviation Snips, Straight Cut Tin Snips, Metal Cutting Shears with Safety Latch and Hanging Hole, Cr-V Steel Sharp Teeth & Non-slip Handle

  • 【Quick Cutting】The WORKPRO metal cutters snip is made of CRV, the aviation snip set is characterized by durable construction and sharp teeth, which ensures quick and easy cutting..
  • 【Energy-saving Operation】 There are two leverage pivots for aviation snip, which is helpful for energy-saving operation and easy cutting..
  • 【Safety Guarantee】 To avoid accidental injury, the safety latch can keep jaws securely closed and the self-locking nuts ensure firm connection and prevent falling off..
  • 【Ergonomic Handle】 Using TPR material for long-term operation and comfortable hand feelings, the handle also has a hanging hole which is convenient for storage and easy to carry..
  • 【Wide Application】 With a cutting thickness range up to 1.2mm cold-rolled steel sheet, you can use these metal snips to cut metal wire, thin PVC pipes, keel, square steel pipes, etc..
Check Stock

Z-COLOR Mini Flat Clamp Table Jaw Bench Clamp Mini Drill Press Vice Opening Parallel Table Vise DIY Sculpture Craft Carving Tool

  • Multipurpose Design: These soft vise jaws are the perfect tool to hold your workpiece firmly in place and protect it from your metal bench vise. Safely hold any round, flat or irregular metal, plastic or wood objects. Simply change between the grooved and flat vice jaw sets accordingly.
  • Compatibility: Our vise jaws are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our soft jaws for bench vise are made from Thermoplastic polyurethane (TPU) rubber which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These vise jaws are ideal for woodworking, gunsmithing, jewelry making, and more delicate type work..
  • Grooved or Flat Surface: Our 4 inch vise soft jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place and a flat surface specifically designed to protect and hold delicate flat or square objects..
  • 4 Strong Magnets for East Attachment: Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your tabl....
Check Stock

Bessey HS-6 6-Inch Wood Handscrew Clamp

  • Adjustable jaws for a strong grip or delicate for those small projects.
  • Oiled wooden jaws won't damage or slip on your work piece.
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from Cold Drawn, carbon steel..
  • Acme thread for Rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, Extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard Maple for a lifetime of use, are oiled to resist glue..
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from cold drawn, carbon steel..
  • Acme thread for rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard maple for a lifetime of use, are oiled to resist glue..
Check Stock

PROXXON MICRO Mill MF 70, 37110

  • Includes the lathe, chuck key, five-piece carbide tipped cutter kit, internal chuck jaws and external chuck jaws, 11 feed rate gears and owners manual.
  • Drill, cut and turn metal, wood and plastic parts with precision..
  • Erie Tools variable speed 7 in. x 14 in. benchtop mini metal lathe creates precision parts..
  • Variable speed motor adjusts to 2500 RPM in either rotational direction allows left-handed threads..
  • Thread indicator helps users turn screw threads anywhere from 12 to 52 TPI. Metric or imperial..
Check Stock