Top Sheet Metal Tools

BILITOOLS 3-Piece Hand Seamers Sheet Metal Bending Pliers Set Straight, 45° & 90° Metal Bender Tool

  • Three sizes of sheet metal bending pliers for your selection: straight jaw, 45 degree jaw, 90 degree jaw. These hand seamers are 2-3/8'' (60mm) wide..
  • Designed for bending or straightening sheet metal edge. Ideal tool for use on the car when it is not possible to use a bench folding machine or in tight areas..
  • Made of high quality, heat treated drop forged carbon steel, these tools are made with longevity and durability. Hardness approx. 30 to 35 HRC. Complete with a black finish with red dipped handles..
  • The pliers jaw close perfectly parallel and the edges of the pliers head are very straight—but they are not sharp. Sheet metal is not damaged when bending through the jaws of the pliers..
  • Please note: the metal benders may being a bit stiff to open/close at first, but they will start to loosen up after a while..
Check Stock

HURRICANE 18 Inch Folding Tool, Sheet Metal Bending Tool for HVAC, Bending and Forming Metal

  • 【Sheet Metal Folding Tool】Hurricane 18" sheet metal folding tools offer a premium choice for bending and forming metal, folding seams are formed from 2 steel halves, permanently joined together..
  • 【Two Folding Depths】Creates 3/8" and 1" depth folding in ductwork..
  • 【Ideal for HVAC Applications】Used for bending and forming metal, making seams, hems, pans and drive edges..
  • 【Ensures Precise and Accurate Bends】Handy sight holes assure accurate bending depth alignment..
  • 【Constructed of Heavy 16-Gauge Steel】Powder-coated low carbon steel to resist rust..
Check Stock

12 Metal DIY Model Kits Tool Including 7 Metal Model Long Edge Bending Tools Tab Twisting Tool Cylinder Cone Shape Bend Assist Tool 1 Clipper 4 Metal Tweezers for 3D Metal Jigsaw Puzzles Assembly

  • ...e suitable for gifts to your family and friends, especially to those DIY model lovers.
  • Multiple functions: these 3D metal puzzles assembly tools are designed to bend the edge of metal pieces, bend or twist the tabs of metal pieces, and make cylinder and cone shapes.
  • Clipper is great for cutting pieces from the metal sheet, you don't need to remove each piece by bending back and forth.
  • Metal tweezers are suitable for unapplied details.
  • Easy to store: these metal model tools are compact and portable, making them easy to store in your toolbox.
  • Their tiny sizes allow you to carry them anywhere on demand, no matter if you are travelling, schooling, working, hiking, etc..
Check Stock

YESWELDER Round Dual Sided Metal Sheet Guage & Metal Sheet Thickness Gauge 2pk Stainless Steel Wire Welding Gauge

  • Package included - 1 piece of round dual sided wire gage + 1 piece of metal sheet thickness gauge.
  • High-quality material - Made of stainless steel, it has anti-rust and anti-corrosion properties. It is durable, it will not rust in dry environment, and it is easy to store. You can use it for a long time without changing it frequently,compact and light in weight, easy to carry.
  • Useful handy tool - Using these gauges to determine the thickness of material before working in order to save time and material. Really useful handy tools.
  • Easy To Use - Simply press the teeth against the object to match the contour and then trace the shape you need.
  • saves your time to mark the precise cut, easy to read.
  • Wide application: Dual-Sided Round Wire Gauge:Gauging uncoated sheet, plate iron and steel.
  • Wire/Metal Sheet Thickness Welding Gauge:Checking metal sheet wire size before welding or workin.
Check Stock

EZARC Reciprocating Saw Blade Bi-Metal Cobalt Sabre Saw Blades for Heavy Metal Cutting 6-Inch 14TPI R626PM+ 5-Pack

  • 【Cobalt Teeth】 M42 with cobalt teeth makes the blade resist high temperatures on heavy metal cutting demolition works..
  • 【Metal Master】 Hard cobalt edge provide effortless cutting into sheet metal, metal pipe and profile..
  • 【Optimized Design】 Enhanced version of the blade is more wear-resistant for cutting heavy metals show better performance..
  • 【Cutting Range】 Medium-thick sheet metals (3 to 10mm), metal pipes/profiles (dia..
  • 【Universal shank】 1/2 inch shank fits all Sawzall tools on the market including Bosch, Dewalt, Milwaukee Sawzall Saw, SKIL, Makita, Black &....
Check Stock

EZARC Reciprocating Saw Blade Bi-Metal Cobalt Sabre Saw Blades for Heavy Metal Cutting 12-Inch 14TPI R1226PM+ (5-Pack)

  • 【Cobalt Teeth】 M42 with cobalt teeth makes the blade resist high temperatures on heavy metal cutting demolition works..
  • 【Metal Master】 Hard cobalt edge provide effortless cutting into sheet metal, metal pipe and profile..
  • 【Optimized Design】 Enhanced version of the blade is more wear-resistant for cutting heavy metals show better performance..
  • 【Cutting Range】 Medium-thick sheet metals (3 to 10mm), metal pipes/profiles (dia..
  • 【Universal shank】 1/2 inch shank fits all Sawzall tools on the market including Bosch, Dewalt, Milwaukee Sawzall Saw, SKIL, Makita, Black & Decker, Ryobi, Porter Cable, Hitachi, Flex, Hilti, Metabo and more..
Check Stock

Glarks 3 Pack Stainless Steel Welding Gauge Set, 25-3000um Wet Film Comb + Wire Metal Sheet Thickness Gauge + Round Dual-Sided Wire Cable Sheet Gage Standard Thickness Metal Gauge AWG and SAE

  • ★【What You Get】: In this welding gauge kit, it include a pack of wet film comb, a pack of wire metal sheet thickness gauge, and a pack of dual-sided wire cable sheet gage total 3 pack. They are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the welding gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: Wet film comb range is 25-3000um. Dual-sided round wire gauge range is 0-36 American standard.
  • Wire metal sheet thickness welding gauge is 24GA (.0239), 22GA (.0299), 20GA (.0359), 18GA (.0478), 16GA (.0598), 14GA (.0747), 1/8" (.0125), 10GA(.1345), 3/16" (.1875), 1/4" (.250), 5/16" (.3125), (.024"), (.030"), (.035")..
  • ★【Pratical Measuring Tools】: The interval division on the gauge is detailed and having high measuring precision. Sizes and numerals are etched on the surface for clarity and easier reading. Good to determine the thickness of the material before welding or working, permits a quick and accurate measuring of the most popular welding thickness..
  • ★【Wide Application】: They measure accurately and have almost no errors. Wet film c....
Check Stock

TOMMARS Sheet Metal Hole Punch Panel Flanger Tool Special Rusted or Damaged Panel Repair Tool Joggler Flange Pliers Edge Setter

  • Special tool to achieve the hole punching and flanging of work piece, for creating and installing patch panels, replacement panels, or custom sheet metal work..
  • One part of the tool creates flanges for weld joints that are overlapping, whereas the other part is capable of punching the weld hole with Φ5mm. Used to flange onto sheet metal up to 20 gauge (1.2mm)..
  • Punch and flange tools are ideal for repairing or restoring rusted or damaged panels when a replacement cannot be sourced or when repair is more cost effective than replacement..
  • This Punch & Flange Pliers is Suitable for automotive body repair, also for sheet metal, iron plate, plastic, machinery, etc..
  • The tool features a spring return handle, which allows for ease of operation. Designed with anti-slip rubber grip for safe use..
Check Stock

Hurricane Sheet Metal Tool, Sheet Metal Folding Tool, Sheet Metal Bending Tool for HVAC, 12 Inch Folding Tool for Bending and Forming Metal

  • 【Sheet Metal Folding Tool】Hurricane 12" sheet metal folding tools offer a premium choice for bending and forming metal, folding seams are formed from 2 steel halves, permanently joined together..
  • 【Two Folding Depths】Creates 3/8" and 1" depth folding in ductwork..
  • 【Ideal for HVAC Applications】Used for bending and forming metal, making seams, hems, pans and drive edges..
  • 【Ensures Precise and Accurate Bends】Handy sight holes assure accurate bending depth alignment..
  • 【Constructed of Heavy 16-Gauge Steel】Powder-coated low carbon steel to resist rust..
Check Stock

3 Pieces Metal DIY Model Tool Sets Include 1 Pieces Nozzle Pliers 1 Pieces Flat Nose Pliers 1 Pieces Needle Nose Pliers for 3D Metal Jigsaw Puzzles Assembly

  • ...tools: you will get a set of 3 pieces metal model tools, including 1 nozzle plier, 1 flat nose plier,1 needle nose plier, which are practical for you to bend and assemble the 3D metal puzzles.
  • Multiple functions: Nozzle pliers are suitable for cutting pieces from the metal sheet, you don't need to remove each piece by bending back and forth.
  • Flat nose pliers can hold parts securely and create tight connections by pulling and twisting tabs.
  • Needle-nose pliers can hold parts and bent and twisted lugs.
  • Quality material: The metal model kits have a smooth surface, which are tiny yet durable, easy to use in the assembly of metal jigsaws.
  • Nice gift: there are 3 metal model kits tools in different sizes and specifications to meet your needs of metal puzzle assembly, and help you build the models quickly, so they are suitable for gifts to your family and friends, especially for those DIY model lovers.
  • Easy to store: these metal model tools are compact and portable, making them easy to store in your toolbox.
  • Their tiny sizes allow you to carry them anywhere on demand, no matter if you ....
Check Stock

EZARC Reciprocating Saw Blade Bi-Metal Cobalt Sabre Saw Blades for Metal Cutting 6-Inch 14TPI R622PM 5-Pack

  • 【Long-Life Teeth】 Teeth made of bI-metal with 8% Cobalt which makes EZARC reciprocating saw blades with 2times longer life comparing with normal....
  • 【Metal Master】 Hard cobalt edge provide effortless cutting into sheet metal, metal pipe and profile..
  • 【Cutting Capacity】 Blades cut through medium to thick sheet metals 3-8 mm, solid pipes/profiles diameter < 100mm..
  • 【Optimized Design】 0.9 thin wall and set teeth design helps to reduce heat build up and maximize your cutting efficiency..
  • 【Universal shank】 1/2 inch shank fits all Sawzall tools on the market including Bosch, Dewalt, Milwaukee Sawzall Saw, SKIL, Makita, Black &....
Check Stock

6pc HSS Saw Blades with 1pc 1/8' Shank Extension Rod, Cutting Wheel Set for Rotary Tools

  • Used on rotary tools, electric power tools for woodworking, metal and plastic cutting..
  • Made of HSS (High Speed Steel) material, sturdy and durable..
  • Maximum RPM of the Saw Blade Set is 20000..
  • Multipurpose: Suitable for timber, plastic, fiberglass, copper, aluminium & thin sheet metal etc. soft metal. An indispensable tool for carving work..
  • Caution: 1. Please take safety measures when cutting.
  • 2. Insert the blade into the end of mandrel and the screw on the top must be tightened..
Check Stock