Top Shell End Mills

TTC R8 x 1\ Arbor Precision Shell End Mill Arbor

Niagara Cutter 17005489 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4' Overall Length, 0.375' Cutting Diameter, 0.375' Shank Diameter

• 4 flute design for creating finer finishes and a higher metal removal rate.
• General purpose end mill for working on all types of materials.
• Made of extra-fine grade carbide for ultra high transverse rupture strength.
• Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
• Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

• High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
• 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
• Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
• Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
• Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

• High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
• Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
• Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
• Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
• Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....

JAINGU 1pc T Slot Milling Cutter 4-12mm Shank 4 Flute Carbide End Mills for Metalworking T Slot Keyseat Router Bits CNC Milling Cutter-1pc 6x2x3x9.5x50

• Package Including:1pc 4 Flute T Type End Mills.

MSA 10033652 Bump Cap, Hard, White 1/EA

• ...d to radiant heat loads producing temperatures up to, but not exceeding 350°F. A smooth crown allows for the easiest use of all MSA welding equipment. Meet the voluntary standard for reverse donning, low temperature [LT], higher temperature [HT[, and Hi-Viz [HV]..
• MULTI-PURPOSE CAP STRENGTH: Crafted with a phenolic shell and handmade for durability, toughness and quality, this helmet is usable in a variety of industries. Use Skullgard helmets in steel mills, welding, construction, open-pit mining, oil/gas/petrochemical refineries, rubber manufacturing, and steam tunnels..
• FAS-TRAC III SUSPENSION: Designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling. Ensure continued wear with drastically improved comfort and a graspable ratchet..
• VARIETY OF SIZES & COLORS: Comes available in a large variety of colors and sizes with custom imprinting and striping options. With custom logo options and any of 27+ different reflective and retro-reflectiv....

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

• Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
• Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
• When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
• Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
• Used for slotting and peripheral milling.

Niagara Cutter - SP205-0.500-D2-S.3-Z2 17011645 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

• 2 Flute design makes these ideal for plunge cutting when chip removal is not a problem.
• General purpose end mill for working on all types of materials.
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
• Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
• Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting.

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

• DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
• Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
• High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
• Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
• Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

ERB 19115 Hi Viz Pink 67 Bump Cap, Pinlock Adjustment, 4-Point Plastic Suspension

• ...d to radiant heat loads producing temperatures up to, but not exceeding 350°F. A smooth crown allows for the easiest use of all MSA welding equipment. Meet the voluntary standard for reverse donning, low temperature [LT], higher temperature [HT[, and Hi-Viz [HV]..
• MULTI-PURPOSE CAP STRENGTH: Crafted with a phenolic shell and handmade for durability, toughness and quality, this helmet is usable in a variety of industries. Use Skullgard helmets in steel mills, welding, construction, open-pit mining, oil/gas/petrochemical refineries, rubber manufacturing, and steam tunnels..
• FAS-TRAC III SUSPENSION: Designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling. Ensure continued wear with drastically improved comfort and a graspable ratchet..
• VARIETY OF SIZES & COLORS: Comes available in a large variety of colors and sizes with custom imprinting and striping options. With custom logo options and any of 27+ different reflective and retro-reflectiv....

Pyramex Safety Products HP14112 Sl Series 4 Pt. Ratchet Suspension Hard Hat, Gray

• ...d to radiant heat loads producing temperatures up to, but not exceeding 350°F. A smooth crown allows for the easiest use of all MSA welding equipment. Meet the voluntary standard for reverse donning, low temperature [LT], higher temperature [HT[, and Hi-Viz [HV]..
• MULTI-PURPOSE CAP STRENGTH: Crafted with a phenolic shell and handmade for durability, toughness and quality, this helmet is usable in a variety of industries. Use Skullgard helmets in steel mills, welding, construction, open-pit mining, oil/gas/petrochemical refineries, rubber manufacturing, and steam tunnels..
• FAS-TRAC III SUSPENSION: Designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling. Ensure continued wear with drastically improved comfort and a graspable ratchet..
• VARIETY OF SIZES & COLORS: Comes available in a large variety of colors and sizes with custom imprinting and striping options. With custom logo options and any of 27+ different reflective and retro-reflectiv....

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

• Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
• Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
• Four flutes produce a better finish than fewer flutes.
• Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.