Top Shift Boot Clamps

Tabazy CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit,

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. ).
  • Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width &....
Check Stock

OriginalEuro Euro Fender Flares Wheel Arch Moulding Trim Spoiler for VW Golf Jetta MK3 3 Vento

  • Fitment---- This gear shift knob gaiter boot is suitable for Golf 3 for Jetta MK3 1991-1998. The size is about 28 * 17cm/11 * 6.7in. Please confirm....
  • High Quality Gear Shift Knob Gaiter---- This gear shift knob gaiter boot cover is made of high-quality ABS & artificial leather materials,....
  • Exquisite Workmanship---- The gear shift knob gaiter boot has exquisite workmanship, and the classic black modeling design brings cool style to your....
  • Additional Protection---- This 5 speed gear knob and gaiter full kit also has the function of dust prevention, which can prevent sundries from....
  • Easy to Install---- The car gear shift knob boot gaiter can be installed directly and is easy to install. Give your gear knob a brand new look. A....
Check Stock

Poweka CV Joint Boot Clamp Pliers with CV Boot Clamps Kit, Auto Repair Tool for Car Tire Repair Clamp Removal - Car Banding/band Tool Kit, Automotive Hose Axle Plier

  • This set contains both a CV joint clamp banding tool and CV boot clamp pliers, which are designed for fast and simple tensioning and securing of CV boot banding strap..
  • Joint clamp banding tool: an effective tool for installing CV clamps. The banding tool works with the installers ratchet and 1/2" socket or uses the provided lever to tension the clamp..
  • CV boot clamp pliers:This device crimps and flattens ear-type clamps found on CV joint boots, and installs quick clamps on the fuel filter and cooling system hoses..
  • With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. Pliers with jaws and formed handles for comfort, less user fatigue, and more productivity..
  • Made from high grade metal and plastic, with high hardness, long lasting. Package included: 1Pcs CV Clamp Tool, 1Pcs CV Joint Boot Clamp Pliers, 4Pcs Small CV Boot Clamps, 4 Pcs Large CV Boot Clamps..
Check Stock

YEHICY Universal Manual Red Canvas Shift Lever Knob Boot Dust Cover JDM Style Gear Shift Knob Collar Hyper Fabric

  • This Shift Knob Shifter Boot Dust Cover is Made of High Quality of Hyper Fabric with 4 Red Seams/Stitches.
  • Shift boot is Fits Automatic or Manual Transmission and modification might be Required - (Part Compatibility is for Reference Only!!).
  • It is a Perfect add on or Replacement for your Current Shift Boot .It will give your car a whole new style look after installation,and It is so easy to install..
  • Size of Car Shift Knob Collars : 9"(Length) x 11"(Bottom) x 0.625" (Top Ring Opening). Black Top Ring.
  • Buy with Confidence: we offer a 12-month Warranty, true worry-free shopping experience. if you don’t absolutely love your Shift Knob Boot, just let us know and we’ll promptly REFUND YOU IN FULL.
Check Stock

Dewhel Shift KNOB Boot Retainer/Adapter for Manual Gear Shifter Lever 12X1.25 (Black)

  • Fit for most Manual Subaru Impreza , Susuki Samurai ,Toyota Supra 1993 -98 (JZ) ,Toyota MR2 1991-95 (SW20),Toyota Corrola,Toyota Celica-Tercel,Toyota Camry,Toyota Trucks,Geo tracker,Ford Mustang (Newer manual),Skyline (R34),Scion xA xB and tC(excluding Scion tC and xB 2008) etc.
  • Made from aircraft grade billet aluminum.
  • Takes up the space between the bottom of your shift knob and the top of your shift boot for a nice aesthetically pleasing affect. This shift boot retainer adapter will allow you to buy any aftermarket shift knob of your choice and say goodbye to your ugly OEM shift knob. The shift boot adapter is meant to be used on MANUAL Gear Shifter Lever TRANSMISSIONS (ONLY)..
Check Stock

Dewhel Shift KNOB Boot Retainer/Adapter for Manual Gear Shifter Lever 12X1.25 (Neo Chrome)

  • Fit for most Manual Subaru Impreza , Susuki Samurai ,Toyota Supra 1993 -98 (JZ) ,Toyota MR2 1991-95 (SW20),Toyota Corrola,Toyota Celica-Tercel,Toyota Camry,Toyota Trucks,Geo tracker,Ford Mustang (Newer manual),Skyline (R34),Scion xA xB and tC(excluding Scion tC and xB 2008) etc.
  • Made from aircraft grade billet aluminum.
  • Takes up the space between the bottom of your shift knob and the top of your shift boot for a nice aesthetically pleasing affect. This shift boot retainer adapter will allow you to buy any aftermarket shift knob of your choice and say goodbye to your ugly OEM shift knob. The shift boot adapter is meant to be used on MANUAL Gear Shifter Lever TRANSMISSIONS (ONLY)..
Check Stock

NOS-H36045 Haynes Ford Fusion 2006-2014 Mercury Milan 2006-2011 Auto Repair Manual

  • [PU Leather Material] The general PU leather shift boot is made of high-quality PU leather material, which is soft and comfortable, precise processing and strict quality control, making it more durable and long service life..
  • [Product Size] The diameter of the inner ring of the small head at the top of the shift shoe: about. 59 inches, and about 10 inches at the bottom..
  • [Exquisite Appearance] The shift knob boot is treated with exquisite technology, which conforms to the overall style of your car. The low-key luxury black surface, after fine surface treatment, will make the appearance smooth and add luxury and elegance to your car..
  • [Easy to Install] The shift handle dust cover simplifies the installation steps and can be replaced directly. The dust cover of the shift handle is designed to be large enough. You can cut some according to the height of the shift lever..
  • [Widely Used] The gearshift leather shift boot is applicable to most manual transmission vehicles. The new gear dust cover is a good way to replace worn or damaged ones and make your car clean and tidy..
Check Stock

Manual/Auto Gear Shift Knob Boot, Car Gear Shifter Gaiter Dust Boot Cover Replacement for E30 E34 E36 E46 Z3

  • 【 Practical Gear Shift Boot Cover 】High Quality Manual/Auto Gear Stick Gaiter Gear Shift Boot Cover, excellent dust proof effects, has strong dustproof performance to make your car clean and tidy. Great Replacement for your damaged and worn one.
  • 【 Unique Style to Replace Your Damaged One 】This cool gear shift boot has unique stylish design, beautiful and elegant, a great aftermarket replacement for your old or worn one. Upgrade driving comfort and interior appearance, unique stylish design will add a fashionable look to your car.
  • 【 Premium Quality 】This gear shift cover is made of grade artificial leather, soft and comfortable, good surface processing, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • 【 Easy Installation 】Simplify installation steps, no modification, cutting, or drilling required. Installing this shift boot was completely hassle free. The slits in the leather lined up perfectly with the notches on the frame.
  • 【 Perfect Compatibility】The shift gaiter is perfect suitable for E34 E36 E46 Z3, perfect match to your original car. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

Complete Ball Joint Lower and Upper Kit for Honda TRX500FA 2001-2016 All Balls

  • 【Universal Fit】Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp plier fits most of cars..
  • 【With 20PCS CV Boot Clamp】 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It's perfect for you to replace the car broken drive shaft CV boot clamp..
  • 【High-quality Materials】The pliers are made of high-quality stainless steel as a whole, which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Equipped with an ergonomically designed non-slip insulated handle, it is practical and comfortable..
  • 【Simple & Easy To Use】Crimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 1/2" extension handle or torque wrench..
  • 【Package Includes】10X Small Clamps, 10X Big Clamps & 1X Pliers Tool. The clamp and tool set can be used directly, which is convenient and worry-free..
Check Stock

Dorman 614-030 Uni-Fit C.V. Joint Boot Air Powered Installation Tool Universal Fit

  • 【Universal Fit】Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp plier fits most of cars..
  • 【With 20PCS CV Boot Clamp】 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It's perfect for you to replace the car broken drive shaft CV boot clamp..
  • 【High-quality Materials】The pliers are made of high-quality stainless steel as a whole, which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Equipped with an ergonomically designed non-slip insulated handle, it is practical and comfortable..
  • 【Simple & Easy To Use】Crimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 1/2" extension handle or torque wrench..
  • 【Package Includes】10X Small Clamps, 10X Big Clamps & 1X Pliers Tool. The clamp and tool set can be used directly, which is conv....
Check Stock

LEIWOOR Bling Rhinestones Crystal Car Seat Belt Cover Shoulder Pads Car Shifter Gear Hand Brake Covers Auto Interior Accessories (Shift_Gear_Cover)

  • 【 Perfect Compatibility 】The shift gaiter is perfect suitable for E30 E34 E36 E46 Z3, perfect match to your original car. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
  • 【 Practical Gear Shift Boot Cover 】High Quality Manual/Auto Gear Stick Gaiter Gear Shift Boot Cover, excellent dust proof effects, has strong dustproof performance to make your car clean and tidy. Great Replacement for your damaged and worn one.
  • 【 Unique Style to Replace Your Damaged One 】This cool gear shift boot has unique stylish design, beautiful and elegant, a great aftermarket replacement for your old or worn one. Upgrade driving comfort and interior appearance, unique stylish design will add a fashionable look to your car.
  • 【 Premium Quality 】This gear shift cover is made of grade artificial leather, soft and comfortable, good surface processing, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • 【 Easy Installation 】Simplify installation steps, no modification, cutting, or drilling required. Installing this shift boot was completely hassle free. The slits in the leather lined up perfectly with the notches on the frame.
Check Stock

DSV Fits 2003-2008 Nissan 350Z Real Black Leather Manual Shift Boot with Red Stitching Leather Part Only

  • 100% Premium Automobile Real Black Leather.
  • Replace your worn out Manual Shift Boot for your 2003-2008 Nissan 350Z.
  • Upholstery material for your Manual Shift Boot.
  • Restore your Manual Shift Boot to look better than new..
Check Stock