Top Shingles Aluminum Acetate

Shingling Roofing Hatchet with Milled Striking Face, Three-Position Exposure Gauge, Nail Slot, and Hickory Wood Handle - by EX ELECTRONIX EXPRESS

  • High carbon steel shingling hatchet with genuine hickory handle - Built for roofers, contractors, framers, and the DIY inclined.
  • Use cutting edge for splitting wood shakes/shingles, and trim roofing felt & asphalt shingles.
  • 3 position gauge for setting overhang/exposure at standard 5" (USA), 5 ⅝'' (14.3 cm metric shingles), and 6¼" for specialty shingles.
  • There is a small notch in the blade that can be used to pry out nails if needed.
Check Stock

PacTool RS501 Roof Snake Tool - Shingle Pry Bar - Heavy Duty Nail Remover Tool - Roof Shingle Remover - Professional Roofing Tools

  • COMMERCIAL CROWBAR: Replace old and worn-out composition roofing shingles in no time with our practical pry tool. Our roof snake makes removing and applying new shingles more accurate, efficient, and safer than traditional replacement methods..
  • ROOFING TOOLS AND EQUIPMENT: Never damage your roof again with this convenient pocket pry bar. Install new 3-tab shingles without bending or hitting surrounding shingles or accidentally striking your fingers with your hammer in the process..
  • HAND TOOLS: A must-have for all roofers, this tool is forged from high-strength steel and has a patented offset nail slot feature allowing you to align nails with the correct one-inch offset from the bottom edge of your current course..
  • NAIL PULLER TOOL: There is no need for a flat bar with this handy claw tip, Easily loosen and remove old, damaged shingles and nails by driving the claw end under the nail, rolling the nail out, and twisting the roof snake..
  • PACTOOL: Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line inspires craftspeople and DIYers to work smarter, measure better, and repair more efficiently..
Check Stock

Roof Shingle Snake Tools, Shingle Removal Tool for Safe Roof Shingles Professional Roofing Tools and Equipment Shingle Nail Installer & Puller Pitch Hopper, Pry Bar Furnish Nail Puller Remover

  • 【Directly and Fastly Replace】 The roof snake makes replacing composition shingles safer, easier, and more accurate than traditional methods..
  • 【Nail Slot Design】 With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. Allow the roofing nails driven perpendicular to the roof which brings longer-lasting repairs without damaging the shingles with your hammer..
  • 【Claw Tip Design】 Easily pull out the nail from the roofing shingles. Just drive the claw tip under the nail and twist, easily pulling out the nail with less effort..
  • 【Caution on the Using】 When installing the new 3-tab shingles, do not bend or hit the surrounding shingles, and do not accidentally hit your fingers with the hammer during installation..
  • 【Customer Service】 If you have any questions, please feel free to contact us. We will offer the most sincere and high-quality after-sales service for you..
Check Stock

Makita AN454 1-3/4\ Coil Roofing Nailer

  • Faster nail driving speed for maximum performance.
  • Easy, one-step open, Adjustable canister system for faster, more precise nail loading.
  • “Tool-less” depth adjustment dial for more precise control in flush nailing shingles.
Check Stock

CRYSTAL Deodorant Stick (30003), Unscented, 4.25 Ounce, White

  • Water%2C Magnesium Aluminum Silicate%2C Aluminum,) Aqua%2C Silicon Dioxide%2C P… 2/3 VIDEOS PRODUCT AVP Water, Magnesium Aluminum Silicate, Aluminum-Zirconium Tetrachlorohydrex Gly, Sodium Lactate, Cyclomethicone, Glyceryl Monostearate, Lecithin (and) Arbutin (and) Linolenic Acid (and) Linoleic Acid (and) Tocopheryl Acetate (and) Ascorbyl Palmitate (and) Glutathione (and) Alcohol (and) Aqua, Silicon Dioxide, Propylene Glycol, Ethylhexylglycerin, Octenidine HCI, Dimethyl Phenylbutanol, Fragrance.
Check Stock

HEATIT HIRD 200 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable

  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips and spacers are included..
  • Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available.
  • Suitable for most roof and gutter configurations..
  • Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately 5 minutes, you should feel slightly warm to the touch. Then unplug the cable..
Check Stock

Cortizone-10 Plus Maximum Strength Anti-Itch Creme 2 oz (Pack of 2)

  • Item Package Dimension: 3.4cm L x 13.8cm W x 16.3cm H.
  • Active ingredients: hydrocortisone 1%. Inacitve Ingredients: water, cetearyl alcohol, glycerin, petrolatum, mineral oil, isopropyl palmitate, sodium lauryl sulfate, beeswax, sodium cetearyl sulfate, methylparaben, tocopheryl acetate, propylparaban, propylene glycol, cetyl alcohol, aluminum sulfate, calcium acetate, dextrin, zea mays (corn) oil, cholecalciferol, retinyl palmitate, aloe barbadensis leaf juice, maltodextrin (309-071).
Check Stock

Heat it HIRD 20 feet Roof Gutter De-Icing Cable

  • ...om damage and leaking, keep the water flowing in gutter & downspouts. When properly installed and operated, this product creates a path for melted snow or ice (“melt water”) to drain from the roof to the ground..
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available.
  • Suitable for most roof and gutter configurations. HIRD cable cannot be used on slate, stone, metal and ceramic roofs..
  • Test the cable before installation. Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately few minutes, it should feel slightly warm to the touch. Then unplug the cable..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug.
  • 5 watts/ft. Pre-assembled, ready to install, no maintenance required.
  • Easy instruction manual, clips and spacers are included..
  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely....
Check Stock

Crescent CMTS4 Switchblade Multi-Purpose Cutter

  • Multi-purpose blade for cutting rope, shingles, vinyl tiles/siding, plastics - also includes a bottle opener, wire cutter and bender.
  • Straight cutting blade for metal ducting, aluminum siding, gutters.
  • Cable cutting blade for cutting wires, wire cable.
  • Standard plier head with large and small gripping teeth and integrated wire cutter.
  • Compound action design for more power with less effort.
  • Quick change interchangeable blades for easy operation.
Check Stock

ESTWING Shingler s Hammer - 20 oz Roofer s Tool with Milled Face & Hickory Wood Handle - MRWS

  • TRIPLE WEDGE CONSTRUCTION – Securely fastens hammer head to handle.
  • HALF HATCHET HEAD – Use cutting edge for splitting wood shakes/shingles.
  • BUILT FOR THE PRO – Roofers, framers, contractors, tradesman & serious DIYers.
  • VERSATILITY ON THE JOB – Gauge for setting reveal of shingles & blade to trim roofing felt & asphalt shingles.
  • GENUINE HICKORY HANDLE – Designed to fit the grip of the user’s hand ensuring comfort & control.
Check Stock

Pro No Ladder Rapid Release 50 Holiday Lights Gutter Clips

  • CHRISTMAAS HOLIDAY LIGHTS HANGERS: No Ladder Pro 50 Rapid Release Clips for use on gutters, shingles or eaves..
  • GUTTER DECK TREE LIGHT: Snap on, easy to use on gutters, shingles, or eaves..
  • CLIP HANGER ON POLE: Fastest, easiest, and safest way to decorate your indoor our outdoor space with holiday lights..
  • INDOOR OUTDOOR DECORATIONS: Works on most open gutters without a gutter guard, shingles up to 1 inch thick, eaves up to 1.5 inches thick..
  • ICICLE HOLIDAY LIGHT: Use one clip spaced every 18-24 inches at your desired space. No Ladder Pro clips work exclusively with No Ladder Pro light hanging pole (sold separately)..
Check Stock

Estwing - E3-LS E3-K Light Weight Shinglers Hatchet, Milled Face And Blue Grip, Silver metallic, 29 oz (Ounces)

  • FORGED IN ONE PIECE – The most durable, longest lasting striking tools available.
  • HALF HATCHET HEAD – Use cutting edge for splitting wood shakes/shingles.
  • VERSATILITY ON THE JOB – Gauge for setting reveal of shingles & blade to trim roofing felt & asphalt shingles.
  • PATENTED SHOCK REDUCTION GRIP – Comfortable, durable & reduces impact vibration by 70%.
  • MADE IN THE USA – Our tools are proudly crafted in Rockford, IL using the finest American steel.
Check Stock