Top Shipbuilding Valve

TFCFL 50 Gallon Pneumatic Mixer, 1/2 HP Stainless Steel Automatic Paint Mixer Machine Ink Coating Mix Tool

  • ...ice for open liquid drums. The mixer is easily clamped to the side of the bucket and the chucking angle can be adjusted.
  • A good mixing effect can be achieved, and the forward steering gear can be attached to the mixer.Environmentally friendly pneumatic mixer products are widely used in food, aerospace manufacturing, shipbuilding, home appliances, painting, food industry, medical and other related industries. 0.100% explosion-proof, small size, light weight, simple operation, rich models, from laboratory samples Complete production specifications to the factory.
  • It can be started, stopped, and instantly turned by the simple control of the directional valve. Sealed design, can be used in harsh environments such as moisture, water, dust, etc.: food, flavor, fragrance, paint, ink, printing and dyeing, cosmetics, pharmaceutical, synthetic leather, leather, tire, ceramic, ball manufacturing and other industries.
Check Stock

SALI 50 Pack Cut Off Wheel 4 1/2 Inch Cutting Wheels 4-1/2" x 3/64" x 7/8" Professional Cutting Stainless Steel, Angle Grinder Cutting Wheel,Cutting Discs with Aggressive Cutting Upgrade (4.5in, 50)

  • ✅Compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool Capable of cutting fiberglass, plastic, iron, steel, stainless steel, and other ferrous metals.
  • ✅Grinder cutting wheels are used in shipbuilding engineering, factory workshops, valve factories, power generation industry, automobile maintenance.
  • ✅ Avoid Wheel Shatter & Injury with lower priced wheels by relying on SALI’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear.
  • ✅Grinder wheels adopts 46# raw material sand, so the cutting surface will be more smooth and clear, no damage to the workpiece. Durable cutting wheel does not have debris if it is broken or damaged when in use, it will keep perfectly, ensuring your safety..
Check Stock

Quick Release Pin Bimini Top Pin 1/4 Inch Full 316 Stainless Steel for Boat Bimini Top Deck Hinge Marine Stainless Steel Boats Accessories (4 Pack)

  • Quick Release Pin: High shear capacity steel gives maximum strength for all applications. bimini top pin quick release pin boat bimini top deck hinge or jaw slide clamp bracket marine hardware..
  • Made of marine grade 316 Stainless Steel, very tough and resistant to corrosion.Quick release pins are economical pins that can be applied in both military and commercial equipment.SIZE:Total Length 1.49″(38mm), Effective Length 1″（24mm）. Wide 0.25 inch, Wide with spring 0.29 inch..
  • Widely used in various Shipbuilding, ship outfitting. Can be used for marine mountain seat, stainless steel pipe clip, ship outfitting, shipbuilding etc..
  • Solid body construction with direct spring loaded ball provides dependable operating qualities..
  • GUARANTEE: Before dispatched, we tested each goods. Any problem about the product, contact us freely, we will reply you as soon as possible. Money Back & Return Guaranteed..
Check Stock

SALI 100 Pack Cut Off Wheels 3 Inch General Purpose Metal Cutting Wheel for 3 In Angle Grinders and Die Grinders- Cutting Disc Aggressive Cutting 3 x 1/16 x 3/8 Operating Up to 25000 RPM and 80 M/S

  • ✅100 Pack 3" x 1/16" x 3/8"（75 * 1.6* 10） Premium Metal Cutting Discs is operating up to 25000 RPM and 80 M/S.
  • ✅Compatible with Die Grinder, Angle grinders，Air Cut Off Tool and Electric Cut Off Tool Capable of cutting fiberglass, plastic, iron, steel, stainless steel, and other ferrous metals.
  • ✅Grinder cutting wheels are used in shipbuilding engineering, factory workshops, valve factories, power generation industry, automobile maintenance.
  • ✅ Avoid Wheel Shatter & Injury with lower priced wheels by relying on SALI’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear.
  • ✅Grinder wheels adopts 46# raw material sand, so the cutting surface will be more smooth and clear, no damage to the workpiece. Durable cutting wheel does not have debris if it is broken or damaged when in use, it will keep perfectly, ensuring your safety..
Check Stock

IRONWALLS 8LBS Top Inlet Commercial Grease Interceptor, Stainless Steel Grease Trap 4 Gallon, Under Sink Grease Trap Waste Water Oil-water Separator for Restaurant, Cafe, Canteen, Factory, Kitchen

  • ...r Inlet Diameter: 1.97". Water Outlet Diameter: 1.77". Grease Outlet Diameter: 0.98"..
  • 【Large Capacity & High Efficiency】The capacity of this waste water interceptor is 8lbs and the flow rate can be up to 4 gallon per minute, which can be widely applied to commercial home kitchen, petroleum, chemical, oil field, shipbuilding, port and municipal engineering industries, catering industry, etc..
  • 【PREMIUM MATERIAL】The mechanical gravity oil-water separator is made of heavy-duty 1.2mm thickness 201 stainless steel, which is sturdy, durable, rust-proof, anti-corrosion, hard to deform, easy to clean and has a long service life. It is also designed with a removable stainless steel inside filter basket with dense mesh, which can effectively collect the solid waste and grease in the first step..
  • 【Reliable Sealing Design】Coming with locking clasps on both sides and rubber seal strip inside the lid to prevent side leakage of sewage, firmly welded water inlet and drain outlet are designed with thread so that can be connected to the water pipes tightly, this commercial grease interceptor is featured with excellent sealing effect..
Check Stock

Mardatt 210Pcs Aluminum Blind Rivets Open End Pop Rivets Assortment Kit Domed Head Pull Rivets Decoration Fastener Long Rivets for Sheet Metal, Industry

  • ... comes with 100 pcs kayak rivets. Diameter size : 1/8".
  • Grip Range: 0.24"-0.31"/6-8mm. Please check size specifications if it is suitable for your case before purchasing. They are very strong enough for both indoor and outdoor use..
  • 【Widely Usage】Our aluminum pop rivets are mainly used in shipbuilding, containers, industries aviation, automobiles, furniture appliances and more. Suitable for kayak like as handles, pad eyes, rod holders, etc. And work well for deep water installation of canoes, canoes and ships..
  • 【100% Risk-Free Shopping】 Zorveiio’s products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitate to contact us with Amazon email. We will reply and give you satisfying solution within 24 hours!.
Check Stock

3 Ton LEVER BLOCK Ratchet Chain Hoist Lift Puller

  • Constructed Of Alloy Steel Chain And Hooks With Hot Forging, This Lever Block Chain Hoist Is Durable, Stable And Features Large Loading Capacity.
  • Widely Used In Shipbuilding, Power Plants, Transport, Construction, Mines, Posts and Other Areas.
Check Stock

CynKen 2x200x200mm Titanium Plate Sheet TC4/GR5 Sheet

  • TC4 titanium alloy has excellent corrosion resistance, small density, high strength,toughness and weldability..
  • Building,aerospace, petrochemical, shipbuilding, automobile, medicine and other departments have been successfully applied..
Check Stock

ANTHONY REFRIGERATION Hinge Pin with Bushing17593G3

  • Materials: Marine Grade 316 Stainless Steel.
  • Widely used in various shipbuilding, ship outfitting..
Check Stock

Round Sling, Endless, 4 ft, 5300 lb.

  • Polyester single-path round sling for heavy-duty lifting in shipbuilding, construction, and other industrial applications.
  • Double polyester covers surround load-bearing yarns for abrasion and cut resistance.
  • Endless (also called type 5 or grommet) sling for vertical, choker, and basket lifting configurations.
  • Color-coded outer cover for quickly determining load capacity.
  • Meets ASME B30.9 and OSHA 1910.184 specifications.
Check Stock

2 Pack Quick Release Pin, Diameter 1/4\

  • Quick Release Pin for bimini top, boat tops and support poles, deck hinge etc.
  • Diameter:1/4"(6.3mm), Overall Length:2"(51mm), Usable Length: 1.5"(38mm).
  • All parts are made of Marine grade 316 stainless steel, Excellent seawater corrosion resistance and durable.
  • Spring loaded ball in the tip of the pin holds it in place.
  • Widely used in various shipbuilding, ship outfitting.
Check Stock

4mm Thick Titanium 6al-4v Sheet (0.16\ x 6\ x 14\) Grade 5 Plate Metal

  • TC4 titanium alloy has excellent corrosion resistance, small density, high strength,toughness and weldability..
  • Building,aerospace, petrochemical, shipbuilding, automobile, medicine and other departments have been successfully applied..
Check Stock