Top Shock Absorber Wrench

Bike Seat Shock Absorber,Bike Rear Shocks,Bike Seat Suspension,Bicycle Shock Absorber,Bike Saddle Suspension Device for Mountain Road Leisure Bike,Load Bear to 440 Pounds

• 【Notice】 This adds about 2-3inch to your seat height. So donot buy if the seat itself is too high..
• 【Family Used】 The shock absorber can be used all the people who can ride but the weight less than 440 and more then 45 pounds..
• 【Shock Absorption】 It has a shock absorption effect that is obvious. Softens road vibrations or shocks and cossets your bottom, makes your bike ride smoother.Notice:If feel too springy,you can adjust the position down through the scale.If have no bounce to it,please adjust the position up through the scale.Becase It has a shock absorption effect different from position scale.
• 【Notice】 Since Adjustable Clamp can be adjusted back and forth by sliding, when you determine the position, you must tighten Clamp with hexagon wrench, otherwise it will slide back and forth..
• 【How to Install】 If hard to install for you，you can check the installation Instructions or look for help from others..
• 【Adjustable Design】 Floating device printed on the scale can be adjusted to your preferences to adapt to different riding habits and make your riding more comfortable.You can adjust the position to adjust the height and elasticity.The higher the height, the greater the elasticity, the lower the height, the smaller the elasticity....

Zerodis 4Pcs Tail Silencers, Rubber Archery String Stabilizer for Compound Bow String Stabilizer Vibration Damper Shock Absorber(Red)

• DURABLE: This bow string stabilizer adopts high quality rubber material, which has the feature of good flexibility, wearable and durable, can be used for a long time..
• HIGH PERFORMANCE: This monkey tail shock absorber has excellent noise and shock reduction effects, which gives you a wonderful archery experience..
• WIDE APPLICATIONS: This monkey tail shock absorber has a wide range of applications, which is widely used in compound bowstrings..
• PRACTICALITY: This monkey tail shock absorber is packed in 4 pieces, which is very practical and useful, and can effectively improve archery performance..
• PORTABLE: This shock absorber is small in size and lightweight, easy to carry and storage. It is a high-quality supply for compound bow lovers..

GDOOL 4PCS Front Rear Shock Absorber ,98mm Adjustable Assembled RC Damper Suspension Aluminum for RC Cars 1/10 HSP 94166 94106 94107 94155 94170 Buggy Truck Crawler Upgraded Hop-up Parts(Red)

• 【Filling Oil】The inside of the shock absorber contains a small amount of lubricating oil. In order to better exert the shock absorption performance, it is recommended to add the appropriate amount of shock absorber oil according to your needs before using..
• 【What You Get】The package contains 4PCS shock absorber. Total length: approx 98mm/3.86'' (Hole center to hole center: approx 98mm/3.54'')..
• 【High-quality and Great Choice】The body is made of lightweight Aluminum alloy and nylon material, which is durable and improves the overall performance of the shock absorber. It is a perfect upgrade replacement accessory..
• 【Applicable Used】Great suitable for 1/10, HSP 94166 94106 94107 94155 94170 RC Cars . Also compatible with 1/10 Hpi Axial Tamiya RC cars..
• 【Warm Reminder】The spring diameter of the 98mm shock absorber is 17mm/0.67''. You need to use long screws and washers to assist the mounting..

HONG111 Bicycle Rear Shock Absorber 150mm 1500 lb Spring Shock Absorber

• Hole Distance:150mm, Bicycle rear shock absorber. 150mm 1500 lb..
• Use:Mountain Bike,Folding Bike, Electric Bike..
• Shock absorber in the classic,easy to ease a wariety of bumps..

Sachs 311 405 Shock Absorbers

GDOOL Front Rear RC Shock Absorber, 4-Pack Shock Absorber 108004 108mm Oil Adjustable Alloy Aluminum Shock for 1:10 HSP Redcat Volcano EXP/Pro Volcano S30 Truck Upgraded Hop-up(Blue)

• 【Widely Used and Applicable Vehicle】Great suitable for 1/10 HSP 94111 94188, Volcano EXP/Pro Volcano S30 Monster Truck. Also compatible with 1/10 Traxxas Hpi Axial Tamiya Himoto RC cars..
• 【High-Q Material】The body is made of lightweight Aluminum alloy and nylon material, which is durable and improves the overall performance of the shock absorber. It is a perfect upgrade replacement accessory. it is the best spare parts choice for your rc cars..
• 【What you Get】The package contains 4PCS shock absorber. Total length: approx 108mm/4.25'' (Hole center to hole center: approx 100mm/3.94'')..
• 【Detail Information】The spring diameter of the 108mm shock absorber is 17mm/0.67''. You need to use long screws and washers to assist the mounting..
• 【Filling Oil】The inside of the shock absorber contains a small amount of lubricating oil. In order to better exert the shock absorption performance, it is recommended to add the appropriate amount of shock absorber oil according to your needs before using.

Oil Pressure Shock Absorber, Black M14 x 20mm Stroke for Pneumatic Air Cylinder AC1420-2

• 【SELF-PRESSURE-REGULATION】M14 air cylinder shock absorber has a soft shock absorbing effect because the self-pressure-regulation function..
• 【REDUCE SHOCK &NOISE】Industrial shock absorber can reduce shock and noise,improve the stability in automated mechanical operations, enhance working efficiency..
• 【RESET PISTON ROD FAST】The spring inside can reset the piston rod fast cause the perfect movement of the check valve..
• 【HIGH QUALITY】Shell is made of high quality alloy and stainless steel, good damping, high hardness and strong heat resistance..
• 【OIL PRESSURE SHOCK ABSORBER】Length: Approx. 12.6cm / 4.96inch, Thread: M14, Stroke: 20mm, Allowable speed: 0.8-3m/s..

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4×4 shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 RC Car Replace 5862 (Red)

• Perfect compatibility—–The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4×4/Stampede 2WD&4×4/Rustler 2WD&4×4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
• High-quality materials—The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
• 4 RC shocks Absorber set—2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
• Excellent quality—CNC machined for precision.
• Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
• Note—There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4×4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4x4 shocks Rustler 4X4 shocks Stampede 4X4 shocks Hoss 4X4 Replace 5862 (Blue)

• Perfect compatibility-----The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
• High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
• 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
• Excellent quality-----CNC machined for precision.
• Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
• Note-----There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4x4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4x4 Shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 Upgrade Parts RC Car Replace 5862 (Titanium Color)

• Perfect compatibility-----The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
• High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
• 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
• Excellent quality-----CNC machined for precision.
• Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
• Note-----There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4x4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).

GZYF 13.5' 340mm Universal Motorcycle Rear Shock Absorbers Suspension Fit Honda Suzuki Kawasaki Yamaha ATV Go Kart Quad Dirt Sport Bikes,Black Silver

• A Pair of Round Hole 340mm Aluminum and Solid Steel Shock Absorber.
• Pressure can be adjusted by springs or air (nitrogen).
• Operation of the coil-over springs and air cylinder is helpful to reduce the shock..
• Shock Absorber bottom/ends type: Round End.
• No instruction included, professional installation recommended..
• Universal fit for most 340mm Motorcycle Shock Absorber For Honda/Yamaha/Suzuki/Kawasaki.
• Dirt bikes, Gokart, ATV, Motorcycles and Quad..

M8 8mm Rear Shock Extender Absorbers Universal Motorcycle Riser Heightening Adapter High Damping Device Thicken Pad Chassis Extender Taper Riser With Screws(Black)

• 【Fitment】Fit for all M8 Shock Absorber,shock absorbers with a diameter of 8mm.If the shock absorber of your is half-thread screw(the front thread diameter is 10mm,the rear thread diameter is 12mm),please enlarge the screw hole by yourself to install it.Aluminum shock absorber height extension riser is universal for / Pit Dirt Bike /ATV / Quad etc.Please confirm the size before buy it..
• 【Material】Constructed of high-strength machined aluminum alloy, rigid and durable.Excellent processing performance, good corrosion resistance, no deformation after long time use..
• 【Function】It can increase by 30~50mm,brilliant height extension effect for damping protection, makes the vehicle easy to hold traction on the steep hill.Buy it and maximize driving pleasure without overloading your body.Easy and fast to install with simplify structure, perfect replacement for your old or broken..
• 【Package】1 Pair Shock Absorber Riser Extenders +1 Pair M8 Screws.Our design team has equipped the set with a screw for easy operation.Screw hole diameter: Approx. 8mm/0.314in.Not only increases the ride comfort, but also the easy assembly and disassembly..