Top Short Band Pass Filter

Channel Master CM-7777HD Amplify Adjustable Gain TV Antenna Preamplifier with LTE Filter | Indoor/Outdoor

  • Works With All Indoor or Outdoor TV Antennas - Can Be Installed Indoor, Outdoor or in Attic Due to its Compact Size and Heavy-Duty Weatherproof Housing.
  • Improves Signal Quality, Decreases Pixilation and May Increase Number of Channels.
  • Includes Built-in LTE Filter - Blocks Interference From 3G, 4G, 5G Smartphones and Transmitters with EMI & FM Out of Band Filtering (Does Not Pass FM Radio Signals to Avoid Over Amplification Issues).
  • Includes Easy Push-Button Adjustable Amplification (17 dB/30 dB) with Flexible USB Powering Options.
  • Trusted Quality: Channel Master Has Been Manufacturing TV Antennas, Amplifiers and Accessories Since 1949 While Offering Best of Class Warranty and Support.
Check Stock

Anti-Interference SMA Interface Band Pass Filter BPF High Reliability Low Loss 433 MHz Block Frequency Audio Accessory

  • Convenient debugging, good selectivity and stability.
  • The filter has the characteristics of low insertion loss, high resistance band rejection and high image attenuation, high power tolerance, low cost and miniaturization..
  • A band-pass filter is a device that allows a particular frequency band to block other frequencies simultaneously..
  • With high reliability, stable and reliable working performance.
Check Stock

California Project

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
Check Stock

Keeley Neutrino V2 Classic Envelope Filter Pedal (KNeutV2)

  • Envelope Filter and Auto-Wah for guitar, bass and keyboard.
  • Peak Control: Sets how much “quack” there is, or how smooth you roll.
  • Filter Selector: lets you choose between 3 types of filters: High,Low, and Band Pass..
  • True-Bypass, 9 VDC, 25 mA, 100% analog and made in the USA..
Check Stock

SFB-1500D - Sundown Audio Monoblock 1750w RMS Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Sundown Audio SIA-2500D Monoblock 2500W RMS Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Rockville RBG18S 18' 2000W Active Powered PA Subwoofer W/Dsp+Limiter Pro/DJ

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
Check Stock

Sundown Audio SFB-3000D 3000W RMS Class D Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

SVBONY SV132 Telescope Filter H-Beta Filter 25nm 1.25 inches Eyepiece Filter for Horsehead Nebula California and Cocoon Nebulae in Dark Skies

  • SV132 H-Beta eyepiece filter makes it possible to view the elusive Horsehead, California, and Cocoon Nebulas in dark skies.
  • Great used with a moderate to large aperture telescope and clear dark skies.
  • Optical high precision double side polishing.
  • Filter substrate is fine-optically polished to 1/4 wave and.
  • Precision double-sided optical coatings improve transmission and cut-off depth.
  • Executes with a transmission of over 90% and completely rejects light pollution.
  • High value transmission of pass-band and optical density of off-band is assured through planetary rotation system, a homogenous and precise coating procedure.
  • The high optical quality of SV132 filters guarantees no loss in sharpness or contrast.
  • Filter with metal mount 1.25" filter threads.
  • Threaded to fit 1.25" eyepieces and threaded diagonal barrels.
Check Stock

ICE 2″ Jupiter 80A Blue Filter for Telescope

  • 7pcs filters set include most popular color planetary and moon telescope eyepiece filters.
  • CPL filter is mainly used for elimination of polarized.
  • and enhances the contrast of the moon and planets in photographic images.
  • 5 color filters are an essential tool of the lunar and planetary.
  • orange and yellow highlight features on Mars.
  • High quality aluminum alloy frame and optical glass with standard 1.25” filter threads suitable for 1.25” eyepieces and other accessories.
  • Cuts down glare and brings out much more surface detail and gives you better contrast.
  • It is a multi-band pass filter transmitting a high percentage of light in the visual spectrum.
  • Effectively filters out selective wavelengths of low-pressure sodium and other man-made sources typically used in street lighting.
Check Stock

Kenwood DDX276BT 6.2 DVD Receiver with Bluetooth | Double DIN Bluetooth Car Stereo with 6.2 Clear Resistive Touch Panel

  • GENERAL FEATURES: AM/FM Tuner, Amazon Alexa voice control, Bluetooth, detachable 13 digit LCD display.
  • AUDIO FEATURES: 13-band graphic EQ with digital time alignment, high-pass filter.
  • low-pass filter, phase, and level controls, Sound Reconstruction: improves sound of compressed music files.
  • EXPANDABILITY: inputs: front-panel auxiliary input and USB port, preamp output for use with and add on Amplifier.
  • SMARTPHONE COMPATABILITY: built-in Bluetooth (version 4.2) for hands-free calling and audio streaming with dual phone connection, iPhone and Android, iPod, iPhone, and iPad control through USB.
  • MORE FEATURES: Built-in amplifier (50 watts x 4 channels), compatible with most factory steering wheel audio controls (adapter required), 1 Year Warranty.
Check Stock

Sundown Audio Salt Series Monoblock Digital Class-D Amplifier (Salt-2 2000W Rms)

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock