Top Short Shank Taps

HORUSDY 5-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Starrett 91A Tap Wrench 1/16 - 1/4 Tap Size 3/32 - 5/32 Square Shank Diameter 6 Body Length

  • Tap wrench body holds 1/16" to 1/4" taps with 3/32" to 5/32" square shank diameters and is used to tap workpieces (requires taps, not included).
  • Plunger-type spring-operated knurled sleeve applies and removes the tap when pressure is applied.
  • Tempered gripping surfaces firmly hold square or round shanks.
Check Stock

Kaufhof ATW-0053 Adjustable T-Handle Tap Wrench Set – 3 Piece M1-M4 / M4-M8 / M6-M12

  • Adjustable tap wrench holds shank sizes 1/4" - 1".
  • For use with 1/4"-1-1/8" hand taps (1/4" - 1" shanks).
  • For use with 1/8"-3/4" pipe taps (1/4" - 1" shanks).
  • 9/32"-29/32" hand reamers (1/4" - 1" shanks).
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

6Pcs 1/4" Titanium Coated Drill Bits, HSS M3 M4 M5 M6 M8 M10 Metric Thread Tap Bits

  • TITANIUM COMBINATION DRILL TAPS: These HSS drill and tap bits are great tools used to create screw threads, to cut or form the female portion of the mating pair. Drill tap bits increase efficiency of operation by allowing for drilling and tapping to be accomplished in a single pass..
  • THREAD AND PITCH SIZE: M3, M4, M5, M6, M8, M10/0.7mm, 0.8mm, 1.0mm, 1.25mm, 1.5mm, with 1/4inch hex shank..
  • USER FRIENDLY: Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks..
  • APPLICATION: They are used on a machine to do the tapping, such as a lathe. Machine tapping with these taps is faster, and generally more accurate because human error is eliminated..
  • GUARANTEE: If there any issue about this product, please CONTACT us, we will give the best solution in the first time. we guarantee replacement or refund..
Check Stock

HORUSDY 6-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14NPT, 1"-11.5NPT. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
  • Uncoated tools have only the base material and do not need any additional treatment or coating, so they can be widely used..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • ...izes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
  • The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, which is the best choice for through-hole processing. Standard tooth spacing, no bad teeth, no burrs, making repair and maintenance a breeze. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind holes are available..
  • Product Packaging Upgrade: The set comes with a convenient red storage box to keep the taps organized and easily accessible. The box also helps protect the taps from damage during transportation and storage. These thread forming taps are perfect for plumbers, mechanics, or anyone who works with pipes and fittings. Use them to create new threads or repair damaged threads quickly and efficiently..
Check Stock

Drilling, Reaming, Tapping and Milling on the Drill Press (DVD)

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

YG-1 - J0283 J0 Series Vanadium Alloy HSS Spiral Pointed Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, 8-32 Thread Size, H3 Tolerance

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

Champion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Tap Drill Bit Set, M3-M10 Tap Drill Bits Kit Titanium Coated HSS Drill and Tap Bits 1/4\ Hex Shank Metric

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

  • ★ Thread Tap Size --- Thread size: 1/4-32 UNEF (right hand).
  • ★ Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
  • ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
  • ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
  • ★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical....
Check Stock