Top Sights For Glock 1gen 4

XS SIGHTS Glock Sight Pusher Tool, Inline Rear Sight Pusher Install Kit, Compatible with All OEM Glock Slides, DIY Series

  • FITS ALL OEM GLOCK SLIDES: Compatible with all Glocks and optic/suppressor height sights.
  • Can also be used for sight installation or windage adjustment on sights with an optic mounted on the pistol.
  • ALL-IN-ONE-KIT: Includes Inline Rear Sight Pusher for Glock Pistols.
  • Lucas Oil Products Extreme Duty Gun Oil (0.135 FL. OZ. / 4ml).
  • Vibra-Tite 131 High Strength Threadlocker (0.06 FL. OZ. / 1.8ml).
  • LIGHTWEIGHT & COMPACT: Lightweight aluminum and compact design makes it easy to carry and use on the go or at the range for sight adjustments.
  • SUPERIOR CRAFTSMANSHIP: Non-marring brass bit prevents any scratching of sights or slides.
  • Built-in centering scale with a 1/16" scale ensures precise sight adjustments.
  • EASY TO INSTALL & MAINTAIN: Tool lifespan up to 50-100 installations with proper care and maintenance.
  • With no need for pads, springs, or knob tightening, our kit helps you get the job done with just simple physics.
Check Stock

Trijicon GL02 Night Sight Installation Tool Kit for Glock Models

  • Installation tool kit for Trijicon Bright & Tough and HD Night sight sets for Glock models.
  • Not compatible with Trijicon Suppressor Sights or Glock 42/43 models.
  • Contents: Rear sight pusher tool and front sight screwdriver for the small retaining screw.
  • Does not work with Trijicon Suppressor Sights.
  • Trijicon night sight tool kit for Glock models.
Check Stock

LABOBOLE Glock Tool Kit, Front Sight Tool, Magazine Disassembly Tool Compatible with Glock 19 26 27 43 Accessories Glock Magazine Tool

  • Magazine Disassembly Tool: Removal and installation of Glock front sights.
  • Front sight tool: It is a 3/16’’ hex thin wall nut driver to install and remove the front sights on Glock pistols.Solid build construction, made of durable metal..
  • Pin Punch Tool is a disassembly tool for removing pins on all Glock pistols.
  • Disassembly tool – This Disassembly Tool is compatible with all Glock models and many other guns.
  • 2.5mm dia x 32mm long (1.25″) hardened steel pin.
  • Made of durable metal, compatible with all Glock Models.
Check Stock

PTOUGE Glock Tool Kit, Front Sight Tool, Magazine Disassembly Tool Pin Punch Tool for Glock 19 26 27 43 Accessories (Glock Tool kit)

  • Magazine Disassembly Tool: Removal and installation of Glock front sights.
  • Front Sight Installation Hex Tool to aid in the installation and removal of front sights on Glock pistols.
  • Pin Punch Tool is a disassembly tool for removing pins on all Glock pistols.
  • Made of durable metal, Tool set compatible with Glock: Magazine Disassembly / Front Sight Installation Hex Tool / Disassembly Tool.
  • Tool Kit Compatible with Standard Glock 9/40mm, Models: G17, G19, G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41ect. Please note: The Tool kit does not work on the Glock 30 round magazines or extended type base plates..
Check Stock

ZOEKIM Night Sights for Glock Pistol 17 17L 19 26 27 33 34 38 39, Fiber Optic 3-DOT Night Sights Glow in The Dark, NO TRITIUM

  • Night sights fits Glock 17, 17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38 and 39 (Excluding M. O. S. models).
  • Metal Sights: made of sturdy CNC machined aluminum with a nice black oxide finish for maximum protection..
  • Three bright green visible dots, NO TRITIUM..
  • Glow in the dark after charging with a light source such as a flashlight or mobile phone flash..
  • Well constructed metal sights for Glock & Pistol..
Check Stock

BASTION Front Sight Tool & Pin Punch Tool Set for Glock | Sight Tool Fits Precisely for Removal & Installation | Pin Punch Makes Field Stripping Super Fast & Easy

  • WHAT YOU GET: 1 GLOCK FRONT SIGHT & 1 PIN PUNCH TOOL (2-in-1 COMBO KIT).
  • the Front Sight Tool works with ALL Glock models.
  • Pin Punch Tool is compatible with the following Glock models: G17 G19 G20 G21 G22 G23 G25 G26 G27 G28 G29 G30 G31 G32 G33 G34 G35 G36 G37 G38 G39..
  • FRONT SIGHT TOOL HAS PRECISE FIT FOR REMOVAL & INSTALLATION: Featuring magnetic tip aluminum driver, our sight tool ensures precise screw removal and installation of Glock front sights. Don’t risk scratching up your Glock with the wrong tool!.
  • PIN PUNCH TOOL MAKES FIELD STRIPPING GLOCK SUPER FAST & EASY: Disassembling your Glock for cleaning and maintenance is essential. Bastion Pin Punch Tool helps remove base plate, locking block, trigger housing, and trigger pins for cleaning or replacement..
  • PREMIUM QUALITY MATERIALS TO LAST | BASTION SIGNATURE WORKMANSHIP: Our punch tool is made of hardened steel tool with black rigid polymer handle. The Front Sight Tool features a Hex wrench, ergonomic injection molded handle, durable black finish, and 3/16″ Hex for sights with a 0.090 hex..
  • BASTION SATISFACTION GUARANTEE: Buy risk-free! Please do reach out to us in case of any issues and we’ll quickly do all we can to make it right..
Check Stock

Glock 19 IWB Holster - USA Made - Fits Glock 19 19X 32 44 45 (Gen 3, 4, 5) 23 (Gen 3, 4) - Klipt IWB Holster by Blade-Tech Holsters, Inside Waistband Concealed Carry (Right Hand)

  • ...positive trigger lock guard so your firearm stays secure with no adjustments needed. Its minimal design means no tightening or loosening screws for retention..
  • Optics Compatible: Out of the box, the Klipt IWB Holster for the Glock 19 is compatible with most optics platforms such as RMR, Red Dot and suppressor height sights..
Check Stock

Suppressor Height Sights Set, Suppressor Sights for Precise Targeting, Front and Rear Sights Compatible for Glock 17 17L 19 26 27 33 34 38 39 All Models Except 42 and 43.

  • 【Designed to Last】Made of tough and durable steel with a fortress finish coating for maximum protection. The matte black will reduce any glare with some standard sights. The front sight comes with a mounting screw and the rear sight has a co-witness setup combo, which improves stability and visibility during the day..
  • 【Higher Brightness & Precise Shooting】These suppressor height Glock sights set are raised up allowing you to see over the top through the window, which largely help increase higher brightness and precise shooting..
  • 【Special Three-dot Sight Design】Sits just high enough over the body to see but not overly high that it would take too much real estate in glass window. The front sight is slim and the rears are wide which are great for fast sight acquisition..
  • 【Easy to Install】These suppressor height sights set works well with all optics co-witness and is very easy to install. Step1.Loosen the allen head on the glock with the hex key allen wrench and then clean the holes up. Step2. Pull the hex nut screw off and install the front sight. Step3. Put your finger on the front sight and put the screw back. Step4. Slide and push the rear sight. Use the sight pusher tool if you rear sight is tight, do not try to use a hammer and punch..
Check Stock

Mosin Nagant Buttstock Pouch Coyote Brown

  • Magazine Disassembly Tool: The easiest and fastest way to remove base plates from the standard Glock magazines without any damage to the plates and....
  • Front Sight Installation Hex Tool: Magnetized hex tool to aid in the installation and removal of front sights on Glock pistols.
  • Armorers Disassembly Tool: Aid in the removal of pins and base plates on Glock pistols.
  • Precision cnc machined；2 Years Warranty: 100% Satisfaction Guarantee.
Check Stock

TRUGLO Glock Sight Installation Kit Glock Sight Installation Kit

  • Front and rear sight installation tools for Glock pistols.
  • Remove, install, or adjust factory or after-market sights.
  • Approved for use with tritium night sights.
  • Compatible with suppressor height sights.
  • Compatible with pistol Red-Dot sight mounts.
Check Stock

Real Avid Armorer’s Handgun Sight Pusher Sight Tool for Gunsmithing, grey/red

  • ACCURATE: Sight pusher sight adjustment advanced, precision tool to push, change, install and adjusts press fit dovetail front and rear sights on most striker-fire handguns and 1911 pistols.
  • ADJUSTABLE: reversible metal Press Block provides multiple pushing surfaces to accommodate a variety of sights..
  • works on dovetail slots down to 5/32” (4mm) wide.
  • accommodates tall sights up to ½” high.
  • 60-degree surface works with most common rear sight profiles.
  • LEVERAGE: Heavy Duty Torque Handle makes sight adjustments work more comfortable.
  • the integrated 3/8” rachet receiver gives additional leverage if you lack hand strength.
  • SECURE FIT: optional plastic clamps and protective pads help protect finish, while aligning, holding and securing slides. Reduce risk of marring..
  • VERSATILE: Slide cradle accommodates most makes and models of striker-fire handguns and 1911 style pistols Ideal for flat side slides.
  • compatible with Glock style slides, M&P, SIG Sauer P320 style and more. See Compatibility Chart for more information..
  • WORKBENCH TOOL: the Master Sight Tool can be secured directly to your workbench with included bench vise attachment ridge to accommodate numerous work space set-up p....
Check Stock

LIRISY Glock Tool Kit Front Sight Tool Magazine Disassembly Tool and Pin Punch Tool for Glock

  • Front Sight Tool: it is a 3/16’’ hex thin wall nut driver to install and remove the front sights on Glock pistols.
  • Pin Punch Tools: a disassembly tool for removing all pins on Glock pistols.
  • Magazine Disassembly Tool: Safely and easily disassemble your Glock magazines for cleaning and inspection without damaging.
Check Stock