Top Signal Butterfly Valve

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover (1.5\ Tube OD)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

Butterfly Valve Wafer PN16, Body/disc - cast Iron, seat - EPDM (250°F / 120°C) with Electric Actuator 110V ON/Off (6\ (DN150))

  • Wide Use: It’s a Motorized Butterfly Valve. Suitable for food, pharmaceutical, beverage, cosmetics and chemical industry..
  • Material: High quality 304 Stainless Steel material, strong sealing. Strong acid resistance, not easy to corrosion. Long service life.
Check Stock

275 330 Gallon IBC Tote Adapter,IBC Tote Brass Valve with 5/8' Outlet,2' Coarse Thread

  • The valve is used for plastic container outlet control to prevent liquid from splashing around..
  • It has the advantages of acid resistance, alkali resistance, corrosion resistance, high mechanical strength..
  • Inner diameter input end diameter: 75mm,Operating temperature -20 degrees centigrade ~ 70 degrees centigrade..
  • The butterfly valve introduces foreign technology, is made of high-density polyethylene and other engineering plastics,and is assembled, with novel structure and beautiful appearance..
  • Widely used in chemical process and acid, liquid storage buckets, tanks, container outlet control valves..
Check Stock

(2-Packs) Male Hose Bibb 3/4″ MIP × 3/4″ MHT with 1/4-Turn Water Hose Shut Off Valve, Hreaded Garden Hose Outlet ideal for gardens, patios, boiler drain

  • 【Package】Pack of 2 pcs of 3/4″ MIP Inlet × 3/4″ MHT Outlet Garden Bibb Stop Valve.
  • 【Construction】Brass Construction for Stronger structure and Anti-corrosion，Butterfly Style T-Handle for Easy Shutoff..
  • 【Easy to Install】 Irrigation garden hose valve allows for easy installation, and is usable for both residential and commercial applications..
  • 【Easy to Use】The outside faucet bibb adopts 1/4-turn valve for quick switch-on/off..
  • 【Versatile】The exterior water spigot is used as a direct water faucet, or as a hose connector for external water service for garden or carwash..
Check Stock

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

  • AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
  • CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
  • AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
  • WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..
Check Stock

BUSIDN 3 inch 76mm Stainless Steel Electric Exhaust Cutout Motor E-cut Valve Kit , Catback Single Y Pipe with One Controller Remote Kit

  • Design to Instantly Increases 20-30 horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. Electrically controlled exhaust valves outflow, simply by flipping the switch..
  • Voltage: 12V. Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. the valve motor is NOT WATERPROOF, Please don’t start work in heavy rain or extremely cold weather.
  • Pipings-Made of high quality T-304 stainless steel with computerized. Mandrel-Bends for strength and durability.
  • 3.0 Inch Electric Exhaust Cutout Valve Kit For all types of vehicles. pls make sure you have enough space to install it.Professional installation is highly recommended.
Check Stock

Acouto Automotive Test Lead Kit Multi-Function Automotive Circuit Test Leads Kit Electrical Test Lead Diagnose Cables Wiring Accessories Kit

  • ...king rapidly. High common use and convenience.
  • Strong Compatibility---- Complete set of various wires in the case that are suitable for most European, American and Japanese made terminals. Apply to any Automotive Multimeter, the extended line of probe for oscilloscope. Equipped with 2 sets of LED Lights.
  • Transmission Signal---- Variable Resister can simulate the pretend signal of coolant temperature sensor, throttle valve sensor and send thepretend signal to vehicle ECU. It would avoid risk to change the new parts again.
  • Multi-function---- The automotive test lead kit can be used to monitor Hall Effect, photoelectric signals, nozzles, electromagnetic valve of transmission shift gears and control signals. SRS connector provided can simulate air bag and routed contracting device of safety belt to avoid accident or miss-judgment.
  • Easy to Use---- When checking the parts, it could connect the back of terminal directly, would not to damage the circuit, reduce thecircuit rust and avoid to adding impedance. When checking the electric current, only use the lines to connect the circuit, do not need to cut the electric wires.
Check Stock

DERNORD 2 Pack 1.5 Inch Tri Clamp Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover 1.5 Tri Clamp Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

2.5 inch 63mm Stainless Steel Electric Exhaust Cutout Motor E-cut Valve Kit , Catback Single Y Pipe with One Controller Remote Kit

  • Cut Out Exhaust Pipe Fits For 2.5"/63mm exhaust system.
  • Design to Instantly Increases 20-30 horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. Electrically controlled exhaust valves outflow, simply by flipping the switch..
  • Electric Exhaust Cutout.Voltage: 12V. Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. the valve motor is NOT WATERPROOF, Please don't start work in heavy rain or extremely cold weather.
  • Pipings-Made of high quality T-304 stainless steel with computerized. Mandrel-Bends for strength and durability..
  • 2.5 Inch Electric Exhaust Cutout Valve Kit For all types of vehicles. pls make sure you have enough space to install it. Professional installation is highly recommended.
Check Stock

Tempo Communications 521A Wire and Valve Locator - Locate Wire Path, Depth, Wire Breaks, Large Nicks, Solenoid Valves (Latest Model)

  • PINPOINT VALVES: Valve solenoid ‘hotspot’ signal makes locating valves easy and rugged headphones block ambient noise.
  • HIGH POWERED TRANSMITTER: Offers extended long range and allows use on higher resistance wire paths.
  • ADJUSTABLE TRANSMITTER: Select the best signal for maximum performance.
  • ADJUSTABLE RECEIVER: Features an adjustable loudspeaker audio, headset audio and visual indications of signal strength.
  • LONG NOSE RECEIVER: Wand makes it easy for you to move quickly and locate even the longest wire paths.
Check Stock

DERNORD 2 Inch Tri Clamp Sanitary Butterfly Valve, Pneumatic Actuator Valve SS304 with Single Acting

  • Pneumatic Butterfly Valve Material: Stainless Steel 304.
Check Stock

NOYITO Voltage to Current Module 0-10V to 0-20mA

  • NOYITO Voltage to Current module, 0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V voltage signal conversion to 0-20mA or 4-20mA current signal output, by adjusting the voltage to adjust the size of the current. Can be used to generate the signal source, valve adjustment, inverter control, PLC debugging, instrumentation test, LED test, analog transmitter.003cbr003e.
  • Implement the industry standard voltage (0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V) into an industry standard current (0-20mA, 4-20mA)., linear output, the output signal can be directly connected to the AD converter, with the AD function with the microcontroller connection.003cbr003e.
  • Using single-chip embedded technology. The module is small and easy to use in different places.003cbr003e.
  • Easy to use, can be fine-tuned by potentiometer.003cbr003e.
  • Module working voltage: DC12-24V . 【Please read the product pictures on the left side of the page for the wiring diagram of the product.】003cbr003e.
  • 【Manufacturer's One-year After-sale Warranty】.
Check Stock