Top Signal Measurement

Vibration Meter AR63B Handheld Precision Digital Intelligent Sensor Vibration Meter, Auto Switch Range

  • FUNCTIONS---Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery, specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep..
  • ACCURATE MEASUREMENT---The vibrometer use the high-performance acceleration meter, realize the repetitiveness and accurate measurement.It has the function of testing axle bearing situation..
  • WORKING PRINCIPLE---Vibration meter(also called also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration..
  • WIDE APPLICATION---Widely used in the lines of Power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc..
  • FEATURES---Multi-functional, with temperature measurement, auto switch range, backlight, auto power off..
Check Stock

Vibrometer, 0.1~199.9m/s2 Peak Digital Vibration Meter, for Engineering Electric Power

  • It can measure the environment temperature with 2 temperature units (℃ and ℉).
  • Wide measurement range of acceleration: 0.1~199.9m/s2 peak.
  • Widely used in mechanical manufacturing, electric power, engineering, space flight and aviation and other fields.
  • Adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the vibration speed, acceleration, displacement.
  • LCD displays measurement result and conditions directly.
Check Stock

Signal Attenuation 20:1 1-0 MHz Bandwidth Converter Passive Attenuator for Oscilloscope

  • 【Exclusive Design】-This signal attenuation is designed for assisting automobile measurement.
  • 【Parameters】-Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal.
  • 【Measuring Range】-Because the signal is attenuated, by using this item, oscilloscope can measure voltage higher than its range(±20V).
  • 【Usage Scenarios】-The signal converter can allow oscilloscope to measure fuel injector and primary ignition waveforms.
  • 【Product Feature】-When used in an oscilloscope to measure an inductive signal, such as a jet nozzle and a primary ignition, it provides enhanced input overload protection.
Check Stock

2 in 1 OSOTC2 Handheld Oscilloscope Multimeter with Electronic Component Tester,2.4\ TFT Digital,Multiple Waveform Capture with Power Supply

  • ...ious transistors, including NPN and PNP triodes, n-channel and p-channel FET, Junction FET, diode, diodes, diodes, thyristors, etc., as well as passive components such as resistance, inductance and capacitance.
  • The crystal detector also has other functional modes: including circuit on-off test, 0 ~ 16V input voltage measurement, PWM output, 0 ~ 24V zener diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity iron measurement, etc.
Check Stock

Vibration Meter - Digital Precision Split Type Meter Tester HT-1201 Sensor Gauge with LCD Backlight Analyzer Acceleration Velocity Displacement Measurement for Moving Mach

  • 【LCD Display】This Digital Precision Split Type Vibration Meter Tester has three and a half digit backlight display.LCD displays measurement result and conditions directly.It can measure the environment temperature with 2 temperature units (℃ and ℉).The default state after power on is acceleration measurement unit (m/s2). Press ▼ key to switch to (mm/s) measurement unit or displacement measurement unit (mm) At the time of measurement. - salinr.
  • 【Widely Used】The product adopts piezoelectric type acceleration sensor and is suitable for measurement of conventional vibration of mechanical equipment. It can measure the vibration speed, acceleration, displacement and is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields. - vibration meter.
  • 【Vibration Meter Tester】This Digital Precision Split Type Vibration Meter Tester adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, It can measure the vibration speed, acceleration, displacement.Automatic power-off time: 4 minutes.Vibration acquisition: piezoceramic accelerometer (shearing type ) - vibration meters.
  • 【Easy to Used】The backlight starts automati....
Check Stock

1-600MHz RF Signal Power Meter Logarithmic Detector -74dBm to 18dBm Radio Frequency Detection

  • The detector is is used for RF signal power detection of frequency range between 1MHZ and 600MHZ.
  • It can detect a rf signal of power from -74dBm to 18dBm, and convert the RF signal into a DC voltage output.
  • The higher radio frequency signal range or power is, the higher output voltage will be.
  • output voltage is proportional to logarithm of input signal range.
  • Widely used for RF signal detection, signal power measurement, environment field strength detection, can also be used as a part of automatic gain control and automatic level control.
  • It can be made into 1mw ~ 1kw RF power meter after appropriate transformation.
Check Stock

DP10007 Oscilloscope Probe, DP10007 100MHZ 700V Probe, High Voltage Accessory for Voltage Testing

  • The attenuation rate is 10X, which can be used in any brand of oscilloscope, meet the needs of floating measurement..
  • DP series high‑voltage differential probes, specially designed for the measurement of high‑voltage differential signals..
  • High‑voltage differential probes sample high‑impedance isolation between input and output to protect person safety..
  • The power supply adopts USB DC 5V output and has a USB interface, which is easy to use and carry..
  • Convert the input high voltage signal to low voltage signal for oscilloscope observation and analysis..
Check Stock

Koolertron 15MHz Embeddable Dual-Channel Function Signal Generator Counter,High Precision DDS Arbitray Waveform Generator Frequency Meter 266MSa/s (15MHz)

  • ...evel, Half-wave, Full-Wave, Pos-Ladder, Neg-Ladder, Noise, Exponential Rise, Exponential Fall, Tone, sine pulse, Lorentz Pulse, and 60 kinds user-defined waveform etc. each channel can be independently set the parameters..
  • With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting function..
  • Storage feature: You can store 100 groups instrument state parameters set by the user, can be called up to Reproduce. The frequency output of Sine wave can be up to 15MHz. 266MSa/s sampling rate. It has 60 positions for saving user-defined waveform. Waveform Length of each one is 2048 and vertical resolution is 14 bits.
  • The rear case can be easily disassembled, and there is no interface around the generator for easy installation and embedding into the test bench. The Generator is the ideal instrument for electronic engineering, laboratories, production lines, teaching and scientific research..
Check Stock

Aideepen 5PCS DHT22/AM2302 Digital Temperature and Humidity Sensor Module Temp Humidity Monitor 3Pins Module with Cable

  • Main Chip: AM2302 high sensitive temperature humidity sensor. Single-bus digital signal output, bidirectional serial data.
  • Single bus digital signal output, two-way serial port data.
  • Temperature range: -40 to 80 degree celsius, Temperature measurement accuracy: +/- 0.5℃ degree celsius.
  • Humidity measuring range: 0~100%RH, Humidity measurement accuracy: ±2%RH.
  • *With fixing screw hole, convenient to install and fixed Size:43*15*10mm/1.69*0.59*0.39in.
Check Stock

Digital Oscilloscope with 2 Channels 120Mhz Bandwidth Signal Generator 500MSa/s Sampling Rate, 2.8" LCD Backlight Display, Waveforms Storage, 3 Scan Modes, XY/YT/Roll, FFT Spectrum, Single Trigger

  • ☑Updated 2 Channels & High Bandwidth：2CH oscilloscope, 120MHz bandwidth, minimum measurement range 10mV /div, 500MSa/s sample rate,advanced digital trigger system.Up to 120M bandwidth can easily cope with mearsurement testes in various fields. Such as mcu debugging, car repair, home appliance repair, personal DIY, electronic competition, power supply debugging, inverter, etc. It can also be used as a portable tool for on-site debugging..
  • ☑FFT Spectrum & Cursor Measurement: The professional portable oscilloscope with FFT display function, can analyze the spectral characteristics of the signal. Cursor measurement function, convenient manual measurement period, frequency and voltage..
  • ☑3 Trigger Modes & One-key AUTO: The DIY oscilloscope kit configured 3 trigger modes, auto/normal/single trigger. Support waveform parameter setting,such as time base, amplitude, trigger slope, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement..
  • ☑Signal Generator: The bottom of the oscilloscope can output a variety of waveforms of 2.5....
Check Stock

Bindpo RF Logarithmic Detector, 1M-10000MHz AD8317 Radio Frequency Logarithmic Detector Power Meter, for RF Signal Power Detection/Radio Frequency Signal Detection

  • The product is designed by using AD8317 chip, and is used for RF signal power detection..
  • Can detect power in -55dBm to -0dBm of an RF signal, so that the RF signal is converted to DC voltage output..
  • The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB..
  • It can be widely used in radio frequency signal detection, signal power measurement, environmental field strength detection..
  • It can also be used as part of automatic gain control and automatic level control..
Check Stock

Okuyonic RF Signal Detector, Camera Tracking Detector Less Interference 10 Level LED Indication with Antenna for Car for Room(Black)

  • MEASURE RANGE: Digital control wireless signal detector with frequency measurement range of 300‑2700MHz, which has high accuracy and high sensitivity..
  • ALARM METHODS: The detector adopts 10 level LED light emitting indication, and has the function of sound vibration alarm, which is accurate and reliable..
  • DETECTABLE SIGNAL: Can detect 2G, 3G, 4G mobile phone signal and wireless device, 1.2G, 2.4G, 5.8G wireless camera, and can accurately locate GPS, with stable performance..
  • LESS INTERFERENCE: Can effectively filter the clutter of the signal, catch the stable signal source for analysis, and judge the direction and distance of the signal source..
  • PORTABLE DESIGN: The wireless signal detector is compact and portable, ideal for bedroom, conference room, mobile phone recording software and car use..
Check Stock