Top Signal Power Supplies

1-600MHz RF Signal Power Meter Logarithmic Detector -74dBm to 18dBm Radio Frequency Detection

  • The detector is is used for RF signal power detection of frequency range between 1MHZ and 600MHZ.
  • It can detect a rf signal of power from -74dBm to 18dBm, and convert the RF signal into a DC voltage output.
  • The higher radio frequency signal range or power is, the higher output voltage will be.
  • output voltage is proportional to logarithm of input signal range.
  • Widely used for RF signal detection, signal power measurement, environment field strength detection, can also be used as a part of automatic gain control and automatic level control.
  • It can be made into 1mw ~ 1kw RF power meter after appropriate transformation.
Check Stock

Slim DIN Rail Mount AC/DC Current Sensor Module, Based on ACS712. (+/-20Amp)

  • The item disign based on ACS712 IC. The item provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection..
  • Operating Voltage: Regulated 5VDC. Operating Current: 20mA(max). Load Maximum Current: +/-5Amp, +/-20Amp and +/-30Amp selectable. Load Frequency Bandwidth: DC ~ 80 kHz. Minimum Isolation Voltage: 2.1 kV(RMS). Output voltage proportional to AC or DC currents. LED indicator for power supply +5V. Pin jumper option for signal output capacitor..
Check Stock

Ximimark A4988 DRV8825 3D Printer Stepper Motor Driver Control Extension Shield Board 3Pcs

  • The A4988/DRV8825 can be used, pay attention to the direction when inserting, otherwise the drive may be burnt..
  • The position where the jumper hits the ON DP indicates 16 subdivisions (4988) or 32 subdivisions (8825)..
  • Jv connects 5V and 12V-24V power supplies..
  • Jc's ESDG corresponds to the EnableStepDirGnd drive signal output on the connection..
Check Stock

5 Axis Mach3 Stepper Motor Controller Board Breakout Board interface board For CNC Router Engraving Milling Machine

  • ...le and the 25-bit LPT cable cannot exceed 1.5 meters..
  • 1. A special high speed chip is used to process the input and output (I/O) signals. It is capable of making the machine work stably, with the features of correcting and enlarging the signals that removing the unnecessary disturb signals..
  • 2. The computer LPT port supplies the power individually, separating from the power supply of other parts. Therefore, the computer and machine tool isolate effectively. It makes the data more secure, with further insurance of security and stability..
  • 3. There are 5 input signals, communicating with the host computer, which are isolated by the optical coupling. Among the optical coupling isolation, the P11and P12 are high-speed, which can be used for connecting main shaft encoder, or the same demanding signal as hand wheel A, B..
  • 4. There are 12 output signal, which is allowed to controlling output, supporting as many as 6 axis linkage. Some of the output port is reusable functinality. Meanwhile, one port only can be used as one function.5.This board only support LPT port,if your laptop does not have its own parallel port,you need purchase a PCI LPT converte Card..
Check Stock

Bindpo RF Logarithmic Detector, 1M-10000MHz AD8317 Radio Frequency Logarithmic Detector Power Meter, for RF Signal Power Detection/Radio Frequency Signal Detection

  • The product is designed by using AD8317 chip, and is used for RF signal power detection..
  • Can detect power in -55dBm to -0dBm of an RF signal, so that the RF signal is converted to DC voltage output..
  • The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB..
  • It can be widely used in radio frequency signal detection, signal power measurement, environmental field strength detection..
  • It can also be used as part of automatic gain control and automatic level control..
Check Stock

Workout 2018 - Aerobic Hits. Music For Fitness and amp; Workout 128 Bpm / 32 Count

  • ADVANCED TECHNOLOGY: The professional series amplifiers are designed to incorporate DC to DC switching power supplies that provide headroom for even the most demanding peaks and dynamic ranges found in today's audio files.
  • INTELLIGENT DESIGN: The car audio amplifier features include power and protection LED indicators.
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Silver RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
  • RCA JACKS: The line-out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
  • AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
Check Stock

Cell Phone Signal Booster AT&T Signal Booster 4G LTE 5G Cell Phone Booster ATT T-Mobile Band12/17 Cell Network Extenders Signal Amplifier ATT Cellular Signal Booster for Home Boost Voice + Data

  • ... the AGC (Automatic Gain Control) function, which can intelligently detect the existing signal strength and adjust it to obtain the best performance, and then reflect its working status through the LED indicator. The booster kit contains everything, including: cables, indoor and outdoor antennas, boosters and power supplies..
  • Excellent service, FCC certification, 30-day refund, 90-day replacement of defective equipment. 2 years warranty service, professional technical team support. If you have any questions during the installation process, you can contact us at any time and we will provide you with the best solution. (Note: When sending products, different antenna matching kits of style A and style B will be shipped randomly, and we will use the one that is in stock for delivery.).
Check Stock

Moonsaudio Pair HiFi Braided Speaker Cable Gold Banana to Banana Plugs Audio Stereo Loudspeaker Wire Cords AWG -99.99% OFC Conductor (9.9FT/3M)

  • The sound is very transparent and natural in higher and mid frequencies as well as dynamic and extended in a bass section..
  • Low impedance,low loss,the gold-plated connectors & oxygen-free copper wire provide clarity,sonic accuracy & minimal signal distortion.The cable supplies you a high-quality signal path from audio components,makes a richer amd fuller performance..
  • Compatible with the device with banana socket: high power class sounds box,amplifiers,home theater,5.1 surround sound system etc..
  • Quick and easy installation for connecting a speaker to an A/V receiver or amplifier with banana plug style ports.
  • Precision bolted interior banana plug terminations create a secure connection and a convenient alternative to cutting and terminating speaker wire with banana plugs..
  • 8 Cores ultra-high purity 99.99% Oxygen Free Copper wire..
Check Stock

CIOKS DC10 Link 9V, 12V, 24V DC Universal Power Supply with 10 Isolated Outputs and 17 Flex Cables for Effect Pedals - Compatible with Radial Tonebones, EHX, Line 6 M9, Blackstar Overdrives, and more

  • EXPANDABLE POWER SOLUTION - With the CIOKS DC10 Link, you can connect two or more power supplies using a single main power cord. Customize your power bank to match your rig's specific needs..
  • CONFIGURABLE POWER OUTPUTS - The professional "Link" power supply offers isolated outlets you can set from 9V to 24V. It delivers a total of clean 2800mA power current..
  • COMES WITH AN mA-METER - The advance mA-meter measures all connected pedal's current draw and lets you know which correct outlet to use without wasting any power..
  • REDUCES HUMS AND NOISE - The onboard toroidal transformer protects your audio signal from causing unwanted noise thanks to the added electromagnetic field shield..
  • ENSURES SMOOTH OPERATION - All outputs have short circuit protection so if one outlet overloads, its respective LED indicator will turn off, but will not affect the other pedals..
Check Stock

ART CleanBOX II Hum Eliminator 2

  • The power ground of a synthesizer, connected to the signal ground of the synth, into a mixer’s ground, then into a mixer’s power ground..
  • The signal ground of a send effect (reverb, delay) into a mixer, and the connecting power grounds of the mixer and the unit..
  • The power ground of a guitar amplifier, connected to a signal processor which has a second guitar amplifier on the other channel, and then the second....
  • The CleanBOX II easily removes ground loops without any signal degradation..
Check Stock

(2) JBL Pro PRX825W Dual 15 3000w 2-Way Powered Speakers w/ WIFI + Mobile App

  • ...ay, Bass- Reflex Speaker. Power Rating: 1500W (750W x 2). Maximum SPL Output: 138 dB peak. Frequency Range (-10 dB): 42 Hz – 18.5 kHz. Frequency Response (3 dB): 49 Hz 17 kHz. Input Connectors: (2) Balanced XLR / 1/4 inch input, (2) Unbalanced RCA Input.
  • Input Impedance: 20K Ohms (balanced), 10K Ohms (unbalanced). Signal Indicators: Limit – Yellow LED indicates peak output has been reached and DSP Limiter is acting Signal – Green LED indicates signal present Power – Blue LED indicates system has power and ready to pass audio. Limit – Yellow LED indicates peak output has been reached and DSP Limiter is acting.
  • Signal – Green LED indicates signal present. Power – Blue LED indicates system has power and ready to pass audio. EQ: User selectable presets for Normal or Boost, Advanced EQ settings available using Wi-Fi and PRX Connect application. Dynamic Control (Input): DBX Type IV limiter circuit. System Low Pass: 80 Hz DSP. Crossover Frequency: 2.4 kHz. Design: Highly Efficient Class-D Amplifier.
  • AC Power Input: 100V – 240V ~ 50/60 Hz. LF Driver: 1 x JBI 2275H 15 in woofer. HF Driver: 1 x JBI 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver. Coverage Pattern: 90 x 50 nominal. Directivity Index (DI): 10.4 dB. D....
Check Stock

OSD Audio 1000W Mono-Channel Class D Subwoofer Amplifier – Onboard DSP, 4-8 Ohm – SMP500

  • The SMP500 is designed for use with higher wattage passive subwoofers that require external power with up to 1000 watts power peak / 400 watts RMS with 4 ohms. It has highly efficient Class D technology to run cool under demanding loads..
  • SOUND QUALITY: Get a deep, crisp, clean low-frequency sound effect in dedicated home theater systems and media rooms to improve the overall sound quality of surround sound systems with dual 100/220 voltage..
  • BASS: This amplifier improves bass response of passive subs with a variable high-cut filter and a front panel control knob that routes higher frequencies to main speakers for low frequency sound effects..
  • CONTROL FEATURES: The SMP500 includes front-mounted power and back panel adjustable gain. A volume control limiter protects the woofers while low and high level pass-through inputs/outputs for greater flexibility..
  • DESIGN: Rack mountable, the SMP500 supplies in-wall or stand-alone subwoofers with the power they need. CE & ETL rated with an auto sensing feature that automatically turns the amp on or off when a signal is detected. A remote control is included..
Check Stock