Top Signal Relays

HiLetgo 3pcs LM393 Rain Drops Sensor Weather Moisture Monitor Sensor Humidity Sensitivity Module Nickeled Plate 3.3-5V for Arduino

  • The sensor uses high quality FR-04 double-sided materials, large area of 5.0 * 4.0CM, and nickel-plated surface, with oxidation resistance,....
  • Comparator output, the signal clean, good waveform, strong driving ability, more than 15mA.
  • The raindrop board and the control board are separate, easy to lead the line.
  • TTL level output, TTL output valid signal is low. Drive capacity of about 100MA, direct drive relays, buzzers, small fans, and so on..
Check Stock

Electronics-Salon DIN Rail Mount 8 DPDT Signal Relay Interface Module. (Operating Voltage: DC 24V)

  • DIN Rail Mount 8 Channel DPDT Signal Relay Interface Module, DC 24V Version..
  • RYxxW-K high quality signal relays, LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
  • Pitch 3.81mm / 0.15" screw terminal block, wire range 26-16AWG, strip length 5mm / 0.2", Metric M2 slotted screw..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/A1vg1+5HA8L.pdf.
Check Stock

moretop Wireless Video & Audio Transmitter and Receiver 5.8GHz 8 Channel RCA 480P Sender with IR Remote Extender for Streaming Cable, Satellite, DVD to TV Wirelessly for RCA Cable (MT-RCA50)

  • Easily extend 1080P HDMI video and audio signal up to 300ft line-of-sight without wires! Simple plug and play installation with no complicated setup or configuration. Powerful dual antenna design and 5GHz signal band reduces interference and increases range. Note: range is reduced indoors due to doors, walls, and interference..
  • Built-in HDMI signal splitter in the Transmitter unit provides an HDMI output jack, which can connect to a near by TV using an HDMI cable - there is no need to buy a separate HDMI splitter!.
  • IR signal pass-back function relays remote control commands back to playback source, IR signal receiver and blaster cables are included!.
  • 0.07 to 0.2 second transmission latency depending on signal quality - great for movies, TV, videos, and presentations. May not be suitable for some types of gaming or PC use..
  • Video: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz. Audio: PCM Only. NOTE: Dolby and DTS NOT SUPPORTED. NOTE: If multiple sets of the transmitter and receiver are installed near each other, only powered on one set at a time to prevent signal crossing..
Check Stock

Fastronix High Current 40/60A Waterproof Relay Panel with Sockets

  • Includes (4) Waterproof Fastronix 40/60 amp Bosch Style Relays and Sockets.
  • Control up to 4 Separate Devices with One Relay Panel.
  • Relays can be Separated and Used in ANY Configuration.
  • Relays Also Provide Negative Spike Suppression.
  • Note: Relays are Waterproof, Sockets are NOT waterproof..
Check Stock

GRAYHILL 70M-IAC5 I/O Module

  • 4 DPDT signal relay module. TAKAMISAWA RY24W-K high quality relays, switch contact material - gold overlay silver-palladium..
  • Darlington transistor circuits drive relay coil, LED indicator for each relay channel..
  • High quality screw terminal block. FR-4 fiber glass PCB, dual copper layers..
  • Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/91Ml0Tph-rL.pdf.
Check Stock

GZAIR Smart Wi-Fi Indoor Air Quality Monitor, Data Logger, PM2.5, PM1.0, TVOC, CO2 Detector, Temperature & Humidity, Real-Time Data via App

  • 6 IN 1: Measure PM2.5, PM1.0, TVOC, CO2, Temperature, and Humidity, with a sensitive laser particle sensor, laser TVOC sensor, and accurate NDIR CO2 sensor. .
  • Automatic & Manual Calibration: Offer two calibration modes, Manual Calibration, and Automatic Calibration. We have calibrated it manually in the factory, and it can automatically calibrate during the detection..
  • Wi-Fi Enabled & APP Smart Control: Smart PT02 can connect to the Internet, works seamlessly with Tuya App, Set alerts, receiving air quality measurements anytime and anywhere..
  • Wireless IoT Controller: Create a Smart Scene in the Tuya app, make PT02 control the Smart home appliances. First, you should add Smart PT02 and other Smart home appliances to Tuya APP. Then set the conditions. The PT02 monitor will activate Smart Fans, Air Purifiers, or other appliances in response to changes in your home’s air quality..
  • Supports RS485/Relays Signal Output: The RS485 port and Relay port are located on the rear of the device. And the RS485 supports data export. The Relays can control the appliances directly (This function is only recommended for professional personnel or engineers.).
Check Stock

Electronics-Salon 2 DPDT Signal Relay Module Board, DC 5V Version, for Arduino Raspberry-Pi 8051 PIC.

  • 2 DPDT signal relay module. TAKAMISAWA RY5W-K high quality relays, switch contact material - gold overlay silver-palladium..
  • Darlington transistor circuits drive relay coil, LED indicator for each relay channel..
  • FR-4 fiber glass PCB, dual copper layers..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/91SnxaAOOnL.pdf.
Check Stock

4 Pcs 12V 2 Pin Electronic Turn Signal Flasher Relay LED Flasher Relay Speed Adjustable Fix for Motorcycle LED Turn Signal Indicator Flasher Relay Orange

  • Product Specifications: the flasher relay for LED turn signal is designed with 2 pins, with nice workmanship.
  • Operating voltage is 12V, switch power....
  • Easy to Install: the turn signal relay is plug and play, convenient to install, saving your time and effort.
  • Please correct the pin position during....
  • Adjustable Speed: you can adjust the flashing frequency of the LED flasher relay to achieve the speed you want, the clockwise direction means slow,....
  • Wide Applications: the 2 pin electronic LED flasher relay is suitable for most motorcycles and bikes, to solve the problem of abnormal function of LED....
  • Enough to Use: you will receive 4 pieces of electronic LED flasher relays for motorcycle, abundant in quantity, enough for you to use or replace,....
Check Stock

IZTOSS 21-Slot Relay Box 7 Relays,9 ATC/ATO Fuses Holder with Metallic Pins and Relays Fuses for Automotive and Marine Engine Bay

  • SUPPORTS RELAYS & FUSES- Safely stores up to 7x Relays (compatible with 0.25" Pins), and (9x) middle size blade fuse (ATC, ATO).including 2 Pieces....
  • ACCESSORIES INCLUDED- Metallic pins are included so you can effortlessly swap out relays and fuses from the back of the fuse relay box..
  • INSTALLATION IS A SNAP- The Snap-Fit upper and lower cover cases allow easy access for relays, fuses, and wires..
  • VERSATILE MOUNTING OPTIONS- Since most modern vehicles have angular/sloping engine bays or trunk areas, we engineered the mounting legs to snugly....
  • OEM-STYLE PROTECTION- Tidy up your vehicle's engine bay by securely stowing away your relays and fuses in this sturdy relay box for a clean factory....
Check Stock

Rega Aria V2 Flagship MM/MC FET Phono Preamplifier

  • ...dicated moving coil and one moving magnet. Each stage is designed and engineered to maximise the potential of your vinyl system whilst remaining easy to use and set up..
  • The Aria is an "all analogue amplifier" with no digital control circuitry. The fully aluminium case screens the internal circuit from any stray RFI signals. Our designers have avoided including any superfluous gadgets as they obstruct the signal path and degrade the sound quality. The Aria incorporates many innovative design ideas including a self-adjusting servo control to keep the MC input circuit at its optimum, compensating for any variations in ambient or operating temperature..
  • Both stages have their own separate input sockets and input pre-amplifier circuitry. This enabled us to design bespoke input circuitry for each cartridge type without compromise. Signal switching is performed at high level and low impedance (via relays) ensuring there is no degradation of the signal..
  • The MC input uses parallel connected, low noise FET's (Field Effect Transistor's) configured as a compound pair. The use of FET transistors ensures there is no bias current flowing in the cartridge coil so as not to upset the delicate magnetic geometry of the cartridge. The MC input has the provision for selec....
Check Stock

Electronic Specialties 193 Black 2.5' x 5' 12/24V Diagnostic Relay Buddy Pro Test Kit

  • Tests 5 different relays, both 12V and 24V and 3 diagnostic trouble codes help define the cause of the bad relay.
  • Kit Includes 5 Relay Adapters and blow mold case.
  • Fails bad relays - Good/Bad indication, green light for PASS, red light for FAIL with flashing trouble code.
  • Tests 5 different relays, both 12V and 24V.
  • 3 diagnostic trouble codes help define the cause of the bad relay.
  • #193 Kit Includes 5 Relay Adapters and blow mold case.
  • Quick off-the-car relay tester - checks relay coil & switch contacts.
Check Stock

AVITAL 3305L 3305L Responder 2-Way Security System with 4-Button LCD Remote

  • dedicated A-to-D converter samples your vehicle’s voltage hundreds of times each second, eliminating the need for a tachometer wire connection.
  • Product 1: D2D serial data port Quickly connects your Avital system to other interface devices via D2D cable.
  • Product 1: XCR onboard relays Extreme capacity remote start relays are built-in to Avital remote start systems..
  • Product 2: D2D serial data port Quickly connects your Avital system to other interface devices via D2D cable.
  • Product 2: XCR onboard relays Extreme capacity remote start relays are built-in to Avital remote start systems..
Check Stock