Top Silicon Bronze Brazing Rod

Hot Max 24000 Brazing Flux Powder 8-Ounce

  • For all types of steel, malleable and cast iron, galvanized metals, brass, and bronze.
  • This flux is used for flame brazing with either an oxy-acetylene or electric carbon arc torch.
  • Active Temperature Range: 1400 to 2200 F (760 to 1205 C).
  • Meets AWS A5.31-91 Type FB3J Standards as well as MIL-F-16136B, Types A and B Standards.
  • Brazing Flux Powder comes in 8-Ounce container, Made in the USA.
Check Stock

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

  • MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....
Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check Stock

642 Aluminum Silicon Bronze Rod 1/2\ Dia. x 1 Foot Length - Unused, Undamaged Item

  • 642 Aluminum Silicon Bronze Rod 1/2" Dia. x 1 Foot Length.
  • Materials are manufactured according to high technological standards.
  • Products advantages lie in a wide range of applications in terms of durability.
  • The raw-stuff is multipurpose for a wide range of applications such as construction or engineering of furniture or transport facilities.
Check Stock

Hot Max 22070 1/8-Inch by 18-Inch Flux Coated Brazing Rod

  • Excellent quality, easy flowing, low fuming brazing rod for nearly all your brazing needs.
  • 65,000 PSI tensile strength Melting Point: 1,600-Degree F (871-Degree C).
Check Stock

655 Silicon Bronze Rod 1/4\ Dia. x 1.0 Foot Length, 2 Units - Unused, Undamaged Item

  • 655 Silicon Bronze Rod 1/4" Dia. x 1.0 Foot Length, 2 Units.
  • Materials are manufactured according to high technological standards.
  • Products advantages lie in a wide range of applications in terms of durability.
  • The raw-stuff is multipurpose for a wide range of applications such as construction or engineering of furniture or transport facilities.
Check Stock

655 Silicon Bronze Rod 1/4\ Dia. x 3.0 Foot Length, 1 Unit - Unused, Undamaged Item

  • 655 Silicon Bronze Rod 1/4" Dia. x 3.0 Foot Length, 1 Unit.
  • Materials are manufactured according to high technological standards.
  • Products advantages lie in a wide range of applications in terms of durability.
  • The raw-stuff is multipurpose for a wide range of applications such as construction or engineering of furniture or transport facilities.
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
Check Stock

Hot Max 24181 1/8-Inch by 36-Inch Low Fuming Bronze Brazing Rod, Flux Coated, 6-Pack

  • Excellent quality, easy flowing, low fuming brazing rod for nearly all your brazing needs.
  • 65,000 PSI tensile strength. Melting Point: 1,600° F (871° C).
Check Stock

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

Permatex 14600 Cold Weld Bonding Compound, Two 1 oz. Tubes , Black

  • 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing.
  • Repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper.
  • can be drilled, tapped, threaded, filed, sanded and painted once cured.
  • resists most automotive, shop and cleaning fluids.
  • Temperature Range: up to 300°F intermittent.
  • Suggested Applications: Aluminum, steel, brass, bronze, castings and stampings.
Check Stock