Top Single Cylinder Diesel Engine
kweiny Diesel Common Rail 18mm Fuel Injector Cap Block Off Tool
- Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds.
- Compatibility: Fit with 2006-2011 6.6L Chevy/GMC Duramax (LBZ & LMM) and for Dodge/Cummins 2007-2017 6.7L, Renault engine system, and other vehicles with a 18mm fuel line nut.
- Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working.
- Specification: M18x1.5mm internal thread nut.
- Material: Carbon tool steel, surface antirust..
Check StockENGINE CARBON DEPOSIT, SLUDGE, GRIME NON-CORROSIVE CLEANER MOTOR OIL ADDITIVE WITH TITANIUM OXIDE NANO PARTICLE TECHNOLOGY
- ENGINE OIL CARBON CLEANER ADDITIVE REMOVE CARBON DEPOSIT INSIDE ENGINE CYLINDER BELOW PISTON RING, OTHER CARBON DEPOSIT CLEANER ONLY SPRAY AND CLLEAN COMBUSTION CHAMBER ON TOP OF PISTON RING..
- NON-CORROSIVE FORMULA WILL NOT HARM ENGINE PARTS, SEAL, PACKING, PISTON RINGS, SAFELY REMOVE ENGINE CYLINDER CARBON DEPOSIT WITHOUT TAKING APART ENGINE.
- USE ONE BOTTLE FOR 4 CYLINDER ENGINE, TWO BOTTLES FOR 6 TO 8 CYLINDER ENGINE.
- FOR SEMI TRUCK DIESEL ENGINES, USE UP TO 8 BOTTLES FOR BEST CLEANING RESULT AND PROTECTION.
Check Stockkweiny Diesel Common Rail 14mm Fuel Injector Cap Block Off Tool
- Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds.
- Compatibility: Fit with 2001-2005 6.6L Chevy/GMC Duramax and for Dodge/Cummins 2003-2007 5.9L, for Bosch diesel common rail system, and other vehicles with a 14mm fuel line nut.
- Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working.
- Specification: M14x1.5mm internal thread nut.
- Material: Carbon tool steel, surface antirust..
Check StockYSTOOL 8PCS Engine Compression Tester Kit Automotive 300PSI Cylinder Pressure Test Gauge Tool Set for Auto Car Truck Motorcycle Gasoline Petrol Gas Engine Diagnostic with Red Case
- This cylinder compression tester kit is a professional tool to test the compression in gasoline engine. The readings will help to diagnosis if there are valve sticking, carbon build-up, piston or cylinder head modified, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, etc. Please note, a variation in compression readings between cylinders is often a better indication of engine problems than the absolute values of compression.
- There are 4 sizes of brass adapters and 2PCS universal push-on connectors in the engine pressure tester kit. The 10mm 12mm 14mm 18mm adapters can be connected to the corresponding size cylinder head. The straight push-on connector and the curved one use rubber cone tip, can be pushed against on the cylinder head, universal for almost all the size cylinder head.
- The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most d....
Check StockDiesel Engine 247CC 4 Stroke 5HP Single Cylinder Air Cooling Vertical Engine Motor Hand Start Direct Injection 3.6KW (Black, 173FA)
- ...AIN PARAMETERS】Displacement: 247CC, Rated power: 3.6KW, Engine speed: 3600 RPM, Cooling mode: Air cooling, Starting mode: Hand start, System: direct-injection-fuel-system, Rotation direction: Counterclockwise (facing the output shaft), Lubrication mode: Pressure splash compound type, Material: aluminum alloy box, Cylinder diameter x stroke: 2.9'' x 2.3'', Tank volume: 85 fl oz, Diesel consumption rate: ≤ 280 g/kw.h, Oil consumption rate: ≤ 2.5 g/kw.h..
Check StockOEMTOOLS 37138 Compression Tester Gauge Set, Compression Tester Automotive, Engine Compression Tester with Flexible Hose, 14mm and 18mm Adapters
- ESSENTIAL CYLINDER COMPRESSION TESTER: Monitor the health of your engine with an accurate reading from our tester.
- Featuring a 14mm and 18mm adapter for spark plug ports.
- Read the condition of your engine’s cylinders with our easy-read pressure gauge.
- ACCURATE COMPRESSION READINGS: Our engine compression gauges give you an accurate reading of engine's compression.
- The compression test kit's flexible rubber hose extension allows you to easily access spark plug ports.
- GREAT FOR CARS AND TRUCKS: Maintaining your vehicle’s engine is essential to the longevity of the vehicle.
- Work on cars and trucks with the cylinder compression test kit's 2-step 14mm and 18mm adapters to determine the health of your cylinders.
- DIAGNOSITC TOOL: Diagnose problems with your vehicle’s cylinders using our engine compression test kit.
- Valves sticking, cracked cylinder heads, worn cylinder walls, and more can be diagnosed with our cylinder compression tool.
- PRODUCT SPECIFICATIONS: This compression tester kit features a flexible rubber hose extension to reach spark plug ports.
- (2) 2-step adapters sized 14mm and 18mm for cars and trucks.
Check StockIAP Performance 043101355CK Complete Dual Port Cylinder Head with Sensor Hole for VW Beetle
- 【Premium Material】Made from quality steel with black coating, corrosion and rust resistance, sturdy and durable..
- 【Function】This tool is attached to the cylinder head, used to lift the cylinder head from the engine..
- 【Application】Suitable for Detroit diesel 60 series engines..
- 【Easy & Convenient to Use】Remove the cylinder head bolts and install the cylinder head lifter bracket (J–35641–A) using the bolt hole at the inboard center, then attach a suitable lifting hook to the eyelet in the lift bracket, and lifter the cylinder head off the engine..
- 【100% Satisfaction Guarantee】Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Cylinder Head Lift Bracket, simply return it for a full refund in 30 days..
Check StockLM 1005 Oil Leak Stop 300 ml
- This Premium Quality Synthetic Blend Works With All Types Of Motor/Engine Oil Including Regular Petroleum, High Mileage, Synthetic Blends And Fully....
- Works In All Gasoline And Diesel Engines Including Turbocharged, Eco Boost, Hybrid And Even Racing Engines, Including 3, 4, 5, 6, 8 And 10 Cylinder....
- Can Also Be Used In Heavy-Duty Applications As Well As Tractors, Boats, Rv'S, Motorcycles (Including Wet Clutch), Atv'S, Lawn Equipment.
- In Most Cases The Oil Leak Issue Will Be Repaired With A Single Dosage. However, For Best Results And To Prevent The Problems From Reoccurring, Use....
Check StockFutchoy Diesel Engine, 196CC Single Cylinder Air Cooling Diesel Engine Recoil Start System for Small Tiller Walking Tractor Transport Vehicle Irrigation
- ...rong Power: The diesel engine has a power of 2200w and a rotating speed of 3000r/min, which provides you with strong power and ensures that your work can be completed quickly and easily..
- ★★Excellent Performance: The diesel engine adopts a socket flow diesel system and single-valve fuel injection. It runs stably, emits less harmful gases, and causes less harm to the environment and the human body..
- ★★Large Capacity: The fuel tank capacity of the diesel engine is 3L/126.8oz, which can support you to work for a long time. Therefore, you do not need to refuel frequently, which is conducive to improving your work efficiency..
- ★★Customer-friendly Design: The diesel engine can fully burn diesel oil during operation, and the fuel consumption rate is only ≤280g/ kw. h, which can save you money.y questions, just contact us in any time and we will reply you within 24 hours..
Check StockMOTOR METER RACING 52mm 2-1/16" Universal Tachometer for Alternator Diesel Engine 6000 RPM Black Dial in Dash
- Sizes: 52mm (2-1/16"). Tachometer Requires 12 Volt Negative Ground Systems..
- FEATURES: Tachometer Suitable for Diesel Engine, "W" Terminal on the Alternator. Tachometer Fits Any 4 / 6 / 8 Cylinder Diesel Engine..
- FEATURES: Flat Clear Acrylic Lens, Black Iron Bezel with Plastic Housing. Light Bulb Illumination..
- PACKAGED: Tachometer, Power Harness, Mounting Hardware, Installation Instructions.
- One Year Limited Warranty for Non-Human Factor Damage & Free Lifetime Technical Support..
Check Stockkweiny Engine Air Valve Holder and Cylinder Leakage Testing Assistant Tool Fit with M12 or M14 Thread
- Main Usage 1: Pressurizes the cylinder to help hold valves closed with compressed air. So The oil seal of the valve can be replaced without....
- Main Usage 2: When the cylinder is in the compression stroke. If the air tightness of the engine is not good enough, you can hear the continuous....
- Compatibility: Suitable for the gasoline engine with M14 or M12 spark plug. The joint of this tool must be installed on the position of the spark....
- Working requirements: Compressed air (working pressure 30psi≤P≤110psi), Air inlet: 1/4" quick coupler male plug.
- Widely use: It can be used for gasoline engine, such as car, truck, boat, motorcycle, ATV, etc. Not to be used in diesel engine vehicle..
Check StockSUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red
- Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
- The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock