Top Single Screw Extruder Barrel

3D Printer 3 in 1 Out Multi-Color Extruder Three Colors Switching Hotend Compatible with Titan Extruder and Bulldog Bowden Extruder 1.75mm

  • Thermistor:100K NTC 3950, main heat sink block 60*27*27mm.
  • This extruder kit can be used as single color filament printing, dual colors filament printing or 3 colors filament switching printing, but not for....
  • Bowden feeding, Compatible with Bulldog, Titan or other types of Bowden extruder (Bulldog extruder is recommended).
  • Color switching is fast and stable, without significant print quality defects..
  • Firmware modification is simple, easy to use.
Check Stock

ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 225 x 225 x 280 mm³ Large Printing Size

  • ...en by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation..
  • 【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS..
  • 【Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging..
  • 【Smarter Printing Experience】Auto mesh bed leveling adopts a non-....
Check Stock

ohhunt Universal Dual Sides Picatinny Rail Rifle Barrel Mount Tube Adapter

  • Solid Aluminum Construction with Matte Black Finish.
  • Smart 2 Piece Design for Clamping Rifle Barrel.
  • Compatible Barrel Range: Diameter 12-20mm.
  • Installs Easily and Wrench is Included, we provide two sets screw for you(long screw and short screw.if you not received two sets screw, pls contact....
  • Great for install barrel mount flashlight, shotgun, Sight, Bipod,etc..
Check Stock

Sight Pusher Tool, Kingson Universal Rear Sight Tool for Glock /1911 /Shield /Sig, Easy Use Aluminum Glock Sight Gunsmithing Tool for Most Semi-Auto Slides

  • ...luminum alloy material, surface is covered with an anodized layer, wear-resistant, corrosion-resistant and not easy to damage. The movable parts of the screw and the manual handle are made of high carbon steel, the screw rotation is smooth, high strength, durable, and the manual handle is difficult to be bended..
  • 【Single Sliding Side Clip Design】Our sight thruster has a left and right sliding side clip on the left and a fixed plate on the right. Our users only need to adjust the sliding side clip on one side to secure the barrel. This is more stable and won’t scratch the barrel compared with both sides clamps. Additionally, nylon plastic pads mounted on clamps protect the barrel from abrasion and scratches..
  • 【Easy to Use and Portable】We designed this easy-to-use sight installation tool with easy using steps, even the entry-level novice can easily get started. The sight tool has small size, not bulky, convenient to carry, and can be brought to the shooting site to adjust the sight. This rear sight tool comes with a sturdy tool storage case for easy storage and portability..
  • 【Applicability】This sight adjusting tool is very suitable for the removal, installation and adjustment of Glock square slides. For Glock 17 26 19 43 etc. Not suitable fo....
Check Stock

Haldis 3D Dual Drive Gear Extruder for 3D Printer MK8 V6 CR10 1.75mm TPU/TPE Flexible Filament Without Motor (DDB Left)

  • 1.【Transparent Design】: Transparent and cool design, double gear extruder, when working, you can watch the printing filament go through to see how it works. The transparent case is very practical and looks beautiful..
  • 2.【Dual Gear Extrusion】: Two stainless steel wheels grab the filament from both sides, high extrusion force, ensure smooth feeding and provide fast retraction, after a lot of trial and error improvements, we successfully improved the gear bite problem, improved The durability and reliability of the gears reduce the consumption of our gears and extend their service life..
  • 3.【Adjustable Pressure Spring】: Easily adjust the clamping force of the filament, improved adjustment thumb screw, more comfortable adjustment and more convenient to use..
  • 4.【High Quality Material】: Transparent hard plastic shell and high quality metal extrusion wheel parts, the transparent material looks very beautiful and beautiful. Lightweight: only 70 grams. It reduces the stress on the printer and is extremely easy to assemble..
  • 5.【Widely Compatible】: Compatible with most DIY ....
Check Stock

Redrex Ender 3 All Metal Bowden Extruder Tension Adjustable with Tube and Stiff Bed-Leveling Springs for Ender 3,Ender 5,CR10 Series 3D Printers

  • All Metal Extruder Replacement for Ender 3 Ender 5 CR10 Series:This durable aluminum extruder frame works more stable than plastic parts..
  • Adjustable Extrusion Spring Tension Design: The extrusion spring tension could be adjusted by tighten the screw..
  • Upgraded Stiff Bed Leveling Springs:It provides stronger tension and longer sevice life than the stock ones..
  • High Quality Bowden Tube :It was made of highly purified PTFE(Poly Tetra Fluoro Ethylene) material,it feeds the filament smoothly..
  • Recommend filament materials:PLA/ABS/Wood/Hips/Flexible/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy..
Check Stock

Redrex Dual Gear Extruder Metal Drive Feeder Upgrade Kit for Creality Ender 3 V2 Ender 3 Pro CR10 Series 3D Printer TPU Filament Supported

  • 【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
  • 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
  • 【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and....
  • 【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 5 Pro,CR10 S series 3D printer..
  • 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139..
Check Stock

Iverntech Upgraded Dual Drive Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer

  • Dual-drive Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385.
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament.
  • Notification: Do not adjust tension of hand twist screw too tight when you print soft filament, otherwise the filament wiring will be winding on the wheel. Manually adjust to a suitable tension for your 3D printer.
  • Suitable for most 3D printers and filaments.
  • Packing with: 1x Bowden Extruder, 1 x Universal Stepper Motor Bracket.
Check Stock

Maddog GOG eNMEy Paintball Gun Marker Bronze HPA Starter Package - Blue

  • ...Automatic Paintball Marker with Maddog's Bronze Compressed Air HPA Paintball Gun Accessory Package. Bronze HPA Accessory Kit Includes: Industry Standard 48/3000 Compressed Air Paintball Tank (Tank Ships EMPTY - Must Be Filled Prior to Use. Brand/Color May Vary), 200 Round Capacity Paintball Loader, Safety Certified Single Pane Anti-Fog Paintball Mask, and Barrel Squeegee (Paintballs Sold Separately)..
  • PERFORMANCE, SAFETY, and VALUE - Fully pneumatic mechanical marker. No batteries nor electronics.
  • just gas up the eNMEy and go play. Spool valve design like many high end markers so it is lighter weight, doesn't "kick" like typical blowback markers, and is more gentle on the paintball when firing so you have less breaks in the barrel. Quick and easy maintenance with its Bolt Out Back system, and velocity is simplified with one screw on the vertical grip regulator..
  • GOG eNMEy GEN2 PAINTBALL GUN - .68 Caliber - Semi-Automatic - 12" Ported Ion Threaded Paintball Barrel - Improved Heavy Duty Solenoid - True Pneumatic Design (No hammer, no sear, no metal-on-metal wear points) - Spool Valve Design - Simple Maintenance - Low-Force Anti-Chop (reduces the chance of a break in the breech) - Composite/Aluminum Components - Electropneumatic Upgrade Path (sold separat....
Check Stock

Swpeet 100Pcs Crib Hardware Screws Nicked Plated M6 × 40/50/60/70/80mm Hex Socket Head Cap Crib Baby Bed Bolt and Barrel Nuts with 1 x Allen Wrench Perfect for Furniture Cots Crib Screws

  • ✿ EASY FOR STORAGE ----Barrel Nuts Size: Total Diameter 11 mm / 0.43''. Those nut is 12.1mm/ 0.47inch and 14.5mm/ 0.57inch in height, the hole diameter is 5mm / 0.2inch, suitable size, can meet your needs. And these barrel nuts are very convenient and small, which is easy for you to store. The barrel nut come to you with a clear box, enable you to store them easily..
  • ✿ WITH A RELEVANT WRENCHES ---- We also provide free relevant wrenches in our sets. 1.It’s simple and lightweight. 2.Six contact surfaces between the Hexagon Socket Screw and the wrench. 3.sufficient and not easily damaged. 4.Can be used to screw deep holes. 5.Can be used to screw very small screws. 6.Both ends of the wrench can be used..
  • ✿ WIDE APPLICATIONS ---- M6 high quality barrel bolt nuts kit is ideal for repairs and replacement. This set of barrel bolts nuts can fit for many different things, such as beds, chairs, cots, crib, sofa and different kinds of furniture, meet your various needs and they can also work well in joining wood, boards, kitchen worktops, etc..
  • ✿ HIGH QUALITY MATERIAL---- Every barrel nut and bolt is Nicked Plated. Those have the performance of high hardness and good toughness, The screw thread is clear and not easy to loose. which make the kit more stur....
Check Stock

Swpeet 84Pcs Black M6 × 20/30/40/50/60/70/80mm Crib Hardware Screws Kit, Hex Socket Head Cap Crib Baby Bed Bolt and Barrel Nuts with 1 x Allen Wrench Perfect for Furniture, Cots, Crib Screws

  • ✿ HIGH QUALITY ---- Every barrel nut and bolt is Nicked Plated. Those have the performance of high hardness and good toughness, The screw thread is clear and not easy to loose. which make the kit more sturdy and durable. This kind of steel can prevent rust and corrosion..
  • ✿ EASY FOR STORAGE ----Barrel Nuts Size: Total Diameter 10 mm / 0.39''. Those nut is 12.1mm/ 0.47inch in height, the hole diameter is 5mm / 0.2inch, suitable size, can meet your needs. And these barrel nuts are very convenient and small, which is easy for you to store. The barrel nut come to you with a clear box, enable you to store them easily..
  • ✿ WITH A RELEVANT WRENCHES ---- We also provide free relevant wrenches in our sets. 1.It’s simple and lightweight. 2.Six contact surfaces between the Hexagon Socket Screw and the wrench. 3.sufficient and not easily damaged. 4.Can be used to screw deep holes. 5.Can be used to screw very small screws. 6.Both ends of the wrench can be used..
  • ✿ WIDE APPLICATIONS ---- M6 high quality barrel bolt nuts kit is ideal for repairs and replacement. This set of barrel bolts nuts can fit for many different things, such as beds, chairs, cots, crib, sofa and different kinds of furniture, meet your various needs and they can also work well in joining....
Check Stock

Junco Intelligent Industrial Grade 3D Printer Model X-max,5 Inch Touchscreen,WiFi Precise Printing with ABS,PLA,TPU,Flexible Filament,300x250x300mm

  • Build Volume 11. 8''x9. 8''x11. 8''(300x250x300mm).
  • Filament Types PLA, ABS, TPU, PETG, Nylon, PC, Carbon fibber, etc..
  • Full metal support more stable than plastic support.
  • Aviation aluminium, CNC machining aluminium alloy.
  • Super big desktop 3d printer, for Education Institutions for Hands-on, Project-Based Learning, Designers, Tinkerers, Hobbyists, & Home Users, Advanced....
Check Stock