Top Single Side Pcb

32.8ft LED Strip Lights, HitLights RGB 5050 Color Changing LED Light Kit Ultra Brighter 300LEDs Flexible Light Strips with RF Remote and UL Power Supply for Home Room Party TV Bedroom

  • Ultra Bright LED Lights for Room: Compared with the single-layer PCB material light strips used by other buyers, HitLights uses SMD 5050 Double PCB Board Layer carries more current for smooth and even illumination without spotting. There are no obvious color differences at both ends (Control within 10%)..
  • Easy Installation: This all-in-one kit includes a two-step installation process, including ①UL adapter - 36W DC power supply, more durable and safe ②RF remote control - wireless and 360-degree remote control, maximum control distance 66ft ③10M strip light - Premium 10M LED strip lights with accessories, great DIY choice. Please make sure that "→" and "+" are on the same side before use..
  • Safe and Efficient: After HitLights test, We promise the service life of these LED light bars exceeds 30,000 hours. This means a 3-year with no-replacement guarantee. The service life is 30,000 hours when it is 100% lit, which is the best choice for improving home lighting..
  • Multi Applications and DIY Opinions: Led tape lights is cuttable between every 3 leds. You can cut off extra strips to adjust to a proper length. (NOTE: Connectors NOT included, if you need more please buy at our storefront)，These LED strip lights are the perfect decoration for any h....
Check Stock

SparkFun Qwiic Quad Solid State Relay Kit - Attach 4 Solid State relays to a Single PCB - Control Some serious Power All from The Easy-to-use Qwiic Connect System - configurable I2C

  • This kit allows you to assemble up to four of these solid state relays on a single PCB and control them all via I2C from your favorite microcontroller..
  • The Quad Solid State Relay Kit comes with four solid state relays rated up to 40A at voltages between 28-380 VAC so you can switch some serious power with this board all from a single Qwiic connector attached to a low-powered microcontroller..
  • Features: Operating Voltage: 2.5-3.6V (3.3V recommended). I2C Address: 0x08 (Default), 0x09 (Alternate via jumper). Max Current (Through Relay): 40A (24-380VAC). Zero Cross Trigger. Normally Open Circuit Only.
  • Includes: 1x Qwiic Quad Solid State PCB. 4x Solid State Relay - 40A (3-32V DC Input). 8x 4-40 Hex Nut. 8x 3/8in. Phillips Machine Screw - 4-40 Thread. Hook-up Wire 8" - 22 AWG (Red). Hook-up Wire 8" - 22 AWG (Black).
  • Assembly required. Tools are not included. You will need a screwdriver and wire clippers/strippers..
Check Stock

Wii Disc Drive Replacement Original DVD Drive ROM Disc DIY Replacement Repair Part Assembly OEM Plug and Play Unit Compatible for Nintendo WII Game Console D2C D3-2 DMS D2A D2B D2E

  • 【Best Choice】Great replacement for your broken or defective DVD drive.Compatible with Nintendo Wii models.
  • 【Compatible With】Complete Unlocked D2A D2B D2C D2E DVD Drive For Original NINTENDO WII With PCB Board Already Installed (Single PCB Board)..
  • 【Plug-and-Play Unit】High Quality DVD Drive Replacement Repair Part for Nintendo Wii . Please note:It can load DVD game ONLY. (cannot read DVD movies)..
  • 【Easy to Install】Super easy to install, even kids can single install.Try-Wing Screwdriver Is Required To Open Up a Console..
  • 【Buy it Risk-Free】Comes with 24 months quality warranty and 30 days money back.We will do everything we can to ensure you are COMPLETELY satisfied with your purchase. Refunds , exchanges and all. You are Guaranteed to be happy. If you meet any issues, please let us know. We are always available to help you..
Check Stock

SUPERNIGHT LED Light Strip White, 6000K Daylight White Lights 16.4 Ft 300leds 60leds/m 5050 SMD Flexible Non-Waterproof Tape for Boats, Bathroom, Mirror, Ceiling

  • 【SMD 5050 LED Rope Lights】There are 300pcs leds on 16.4ft flexible PCB board.On the back of PCB,there is double-side adhesive tape which can help you install it easier. This SUPERNIGHT strip can work with 12V 5A power supply/dimmer (Not included)..
  • 【Cuttable and Joinable】Please find the scissor mark, then you can cut the strip as you request.
  • Also you can use other strip tools to connect more strips..
  • 【Non-waterproof PCB】This 16.4ft length flexible strip is non-waterproof,indoor use only.With better light-admitting quality and heat dispersion than IP65 waterproof strip light..
  • 【Easy to instsall】Strong adhesive tape on the back of the tape can help you easy to install the strip. Please make sure the surface is dry, smooth, no dust..
  • 【SUPERNIGHT Best Service】Please contact with us if our 5050 LED strip light can not work or has other problem, please contact us asap. Professional SUPERNIGHT team would help you solve any problems..
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

Donerton Wireless Earbuds Wireless 5.1 Headphones 140 Hours Playtime Earphones with Charging Case in Ear Headset IP7 Waterproof Earbud Noise Cancelling Microphone LCD Display for Sports/Working

  • Fashionable and Stylish Design: Donerton wireless earbud consist of high quality PC and ABS construction that ensures a comfortable tactility. The....
  • Up to 140 Hours Playtime: With a single charge for wireless headphones, you can listen for 5-6 hours. While the charging case extends to 140 hours,....
  • Premium Stereo Sound with Powerful Bass: I09 noise cancelling headphones adopt 6 mm composite diaphragm and HiFi driver, ultra-thin elastic diaphragm....
  • IP7 Waterproof: I09 wireless earphones are certificated with IP7 waterproof rating and nano-coating material, it can protects the headphones from....
  • PCB antenna and wireless 5.1: The integrated PCB antenna of the satellite standard combined with wireless 5.1 technology, ensures a stable wireless....
Check Stock

Phantom Electronic | Nixie Tube Clock Unique Led Gaming Table Desk Shelf Digital Flip Retro Steampunk Vintage Decor - Free USB Fan Included in The Set - Wood Effect 7 x 3.4 2.9 87135

  • (FREE GIFT) - USB Led Fan Clock, Included For Free!.
  • (LED IMITATED NIXIE TUBE CLOCK) - 6 RGB Glowing Pcb On The Bottom Could Be Customised In Any Color Sequence You Want. 10 Numbers Engraved In Each Pane....
  • (SIMPLE SETUP) - Note that before using, the clock needs to be setup first. The assemble process is easy and instruction book is included. No extra....
  • (7 MODES OF COLOR DISPLAY) - 16 Million Color Map in each PCB, you can easily adjust any color you want in each pane. There will be Check mode, Single....
  • (USB POWERED) - Equipped with micro USB power port. Can be easily powered by your phone charger, power bank or computer!.
Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

  • 【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
  • 【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
  • 【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
  • 【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
Check Stock

PC Diagnostic 4-Digit Card,Module Board Test & Measuring Module PC Computer Mother Board Debug Post Card Analyzer PCI Motherboard Tester Diagnostics Display for Desktop PC

  • PCI and ISA 4 digit PCI analyzer:standard PCI and ISA interface,easy access to desktop PC.Standard PCI and ISA interfaces for easy access to desktop PCS.4 digit display,the first 2 digits indicate the current error code,and the last 2 digits indicate the previous error code..
  • PC Diagnostic 4-Digit Card fully compatible with any kind motherboards which has the PCI and ISA bus slot.
  • The POST code display is made up of a dual, dot matrix hexadecimal read-out that display's Power On Self Test (POST) status codes..
  • Self checking remote display function. Dual POST code display - User can readout the POST at PCB component and solder side. It is easy to view the POST code when user plugs the POST card in computer system. Recall previous post codes at the touch of a button.
Check Stock

Musical Paradise MP-301 MK3 Mini Tube Amplifier with Headphone Output Deluxe Version

  • Single Ended Class A 7W/Channel Tube Amplifier.
  • Supports 6L6 (6P3P), KT66, 5881, EL34, KT77, KT88 and 6550 (Plug & Play).
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock