Top Single Wires

GenBasic 80 Piece Male to Female 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) and 40 x 20cm (8 Inches) for 80 Total Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

Capri Tools 20011 Automatic Wire Stripper and Cutter

  • This automatic wire stripper has a narrow profile, allowing it to access tight areas.
  • The stripping blades automatically self-adjust to different gauges.
  • Fast compound consistent wire stripping action.
  • Grips and strips with a single squeezing motion.
  • Strips wires 24-10 AWG and cuts wires up to 12 AWG with built-in wire cutter.
Check Stock

Ultima Single Fire Ignition Kit 53-660

  • Will work on Evolution Sportsters & all nose cone type Shovelhead & Evolution Big Twins motors from 1970 to 1999..
  • Rotor, Single Fire Coil, Control Module and Plug Wires included.
  • Ignition kit includes single fire coil that puts out over 30,000 volts with fast rise times and.
  • Intelligent overvoltage / overcurrent protection..
Check Stock

Amazon Basics Speaker Connector Banana Plugs - 6 pairs

  • 6 pairs of banana plugs (12 plugs total) for easily installing speakers.
  • Self-crimping teeth for easy installation.
  • Durable 24k gold plating provides corrosion protection and ensures high-quality audio.
  • Female connection on base of each plug for connecting multiple speakers from a single output.
  • includes black and red rings for color coding the wires.
Check Stock

Amazon Basics Speaker Connector Banana Plugs - 12 pairs

  • 12 pairs of banana plugs (24 plugs total) for easily installing speakers.
  • Self-crimping teeth for easy installation.
  • Durable 24k gold plating provides corrosion protection and ensures high-quality audio.
  • Female connection on base of each plug for connecting multiple speakers from a single output.
  • includes black and red rings for color coding the wires.
Check Stock

Audio2000'S ACC3166BR4 Two-Pair (2-Black, 2-Red, 4 Plugs Total) Corrosion-Resistant Banana Plugs for Speaker Wires

  • 【2-Pair Banana Connectors】Including two pairs (2-black and 2-red, 4 plugs total) of corrosion-resistant banana plugs for speaker wires.
  • 【Designed For Speaker Wires】Designed for up to 9-gauge speaker wires and compatible with bare wires, spades, or other banana plugs.
  • 【Standard Tip-To-Tip Spacing】Standard 3/4-inch tip-to-tip spacing.
  • 【Configured With Female Banana Connector At The Bottom】Each plug configured with a female banana connector at the bottom allowing multiple such speaker banana plugs to be connected for hooking up to multiple speakers to a single banana output on an amplifier.
  • 【Plated With Corrosion-Resistant Nickel】Connectors plated with corrosion-resistant nickel for sound quality and durability.
Check Stock

Audio2000'S ACC3166BR8 Four-Pair (4-Black, 4-Red, 8 Plugs Total) Corrosion-Resistant Banana Plugs for Speaker Wires

  • 【4-Pair Banana Connectors】Including four pairs (4-black and 4-red, 8 plugs total) of corrosion-resistant banana plugs for speaker wires.
  • 【Designed For Speaker Wires】Designed for up to 9-gauge speaker wires and compatible with bare wires, spades, or other banana plugs.
  • 【Standard Tip-To-Tip Spacing】Standard 3/4-inch tip-to-tip spacing.
  • 【Configured With Female Banana Connector At The Bottom】Each plug configured with a female banana connector at the bottom allowing multiple such speaker banana plugs to be connected for hooking up to multiple speakers to a single banana output on an amplifier.
  • 【Plated With Corrosion-Resistant Nickel】Connectors plated with corrosion-resistant nickel for sound quality and durability.
Check Stock

Partsam 10x Amber 3/4

  • Single Led brings a safer driving and lighting..
  • Partsam (10xAmber in clear lens) Led Light as clearance Light/side Marker/Identification Light/turn signal light w/ Plugs..
  • Universal for Pickups,Truck Trailers, SUV van Caravan and Boat Lorry Bus.
  • Diameter without grommet: 18mm (0.75inch).
  • 3/4 inch round Bullet Miniature side marker Clear Lens.
  • Two wires plug and rubber Grommet are attached – 2 Wires Connection: White is Negative and Black is Positive..
Check Stock

Wire Tracer Electrical Circuit Tracer Tone Generator and Probe Kit,Circuit Breaker Finder Network Cable Continuity Tester Electric,Automotive Wire Tracker Telephone Line Finder Toner Detector Tool

  • Quick & Accurate Network Cable Collation: The cable tracer can search for wires in various applications, including buried wires, single stranded wires, broken wires, etc. Suitable for wires, fixed telephones, coaxial cables, automotive cables, etc. Note: our electrical circuit tracer is not suitable for live circuit!.
  • Flexible Tone Generator Wire Tracer: The wire toner tracer receiver is equipped with an adjustable sensitivity dial, which allows you to accurately trace a wire in congested places. And also, you can use the wire toner to find a intermittent circuit problem. Just flexing wires or connectors, and then you will hear that there is a change in the receiver tone..
  • Short & Open Finder Circuit Tester: In CONT mode, you can check the short circuit and open circuit in the line. The attached RJ11 connector allows you to easily test the telephone system (in CONT mode, you need to use two alligator clips)..
  • Tone Tracing Probe Kit: In TONE mode, you can quickly track cables passing through ceilings, under floors, interior wall barriers, etc., without the risk of not knowing the exact location of the wires (only one alligator clip is used in TONE mode)..
  • No Risk : Our wire tester electrical tool has One-year Warranty! And, we are always put our customers....
Check Stock

Feishiong 13 Inch Cake Cutter Wire Cake Slicer Non-Toxic Stainless Steel Cake Leveler

  • Material: the cake slitter is made of stainless steel, has corrosion resistance and durable, also easy to clean, will be a nice tool to make your cake get a suitable size for beautiful decoration.
  • Combination set: the single line cake slitter is with 1 wire and the double wires cake slitter with 2 wires, both styles are classic and practical, the single line slitter is simple, the double lines slitter can cut many pieces of cake at the same time, good time saver.
  • Adjustable design: the cake cutter slicer is designed with 8 adjustable scales so that you can cut as you want in different thickness, reducing falling, will present a smooth surface and beautiful cake appearance after cutting.
  • Easy to use: with a handle style and convenient for you to operate, adjust the height of the wire and then pull through the cake to slice layers slowly, easy to apply.
Check Stock

REXQualis 120pcs Breadboard Jumper Wires 20cm Length Dupont Wire Kit 40pin Male to Female, 40pin Male to Male, 40pin Female to Female for Arduino/DIY/Raspberry Pi 2 3

  • The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.
  • Including 1pcs 40-pin male to female jumper wires, 1pcs 40-pin male to male jumper wires, 1pcs 40-pin female to female jumper wires.
  • 10 Different Colors, 120units copper cable in total, for making prototypes with boards, stepper motor 3D printer etc..
  • We have always cared about the customer experience and improve the product function details.
Check Stock

MICTUNING Blue ROCK LIGHTS Rocker Switch Kit- On/Off Blue LED Light 20A 12V

  • MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights.
  • PERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark.
  • STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability.
  • WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc.
  • WHAT YOU’LL GET: 1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service. Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram.
Check Stock