Top Single handed Wire Cutter

MIHAO Steel Cable Cutter - Wire Rope Cutter - Bicycle Cable Cutter for Cable Railing,Up to 5/32 inch Copper Cable Cutter with 10Pcs Bike Brake Cable Cap End Tips, Red&Black, 7.7 x 2.2 x 1.2 inches

  • 【EXCELLENT DESIGN】Mihao cutter heavy duty is designed for cutting steel wire, It can cut less than 5/32" hard steel cable, wire rope, spring wire, aluminum cable etc. Mihao Wire Cutter is very sharp and clean cut.
  • 【HIGH QUALITY MATERIAL】 Mihao Wire Cutter is made of Chrome-Vanadium Steel, durable, cut quick. Knife edge had a heat treatment, so which made the blade hard enough to cutter.
  • 【SIMPLICITY OF OPERATOR AND WORKS WELL】 Mihao cable wire cutter use to operate easily with one hand, Because Mihao wire cutters has a Labor-saving spring. Practical and durable-make very precise, very clean cuts without fraying or smashing the ends, it not only cut the cutaway cables and ripcords perfectly also great for grommet removal.
  • 【APPLICATION】 Recommended for installing less than 5/32”cable railing projects, bicycle Cable, stainless steel wire rope, aircraft cable, copper cable, aluminum cable etc.
  • 【PACKAGE DETAIL】 Cable Cutters includes a 8 inch stainless steel wire cutter for cutting steel wire which up to 5/32”, with 10pcs bike brake cable end caps, ST:Stainless Steel Wire Rope Cutter Bicycle Cable Cutter for Cable Railing Deck Copper Steel Cable Cutter.
Check Stock

SogYupk Ratchet Cable Cutter,Manual Mechanical Heavy Duty Copper Aluminum Ratchet Wire Cutting, one of the Electrician's Tools (Ratchet Cable Wire Cutter Can Cut Wire Up to 240mm²).

  • ... for cutting steel rubber wire/steel rope/hard iron wire. When repairing an energized circuit, for safety, the cable must be cut off after the power is turned off..
  • 【Cable Cutting】Manual ratchet cable wire cutting shears can be used to cut aluminum and copper cables, and can also be used for communication cables/single-strand cables/multi-strand cables, etc. The handle is designed with non-slip/wear-resistance, which is comfortable to hold and makes your every time It's all a pleasure to cut..
  • 【Cutting range】The cutting range of the cable cutter is 240mm², which can quickly help you to complete the cutting, and the cutting edge is flat. (Copper cable ≤ 300 MCM, aluminum cable ≤ 600 MCM)..
  • 【Ratchet Design】The special design of the ratchet makes the cutting position not misaligned when the ratchet slips. Open the release lever, and as your hand applies force to the handle of the cable wire cutter, the ratchet starts to drive until the cut is complete..
  • 【After-sale service】Cable shear model: HS-325A. If you have any dissatisfaction with the product you received, please contact me, SogYupk will be responsible for the problem of the product, and I will provide you with a satisfactory solution within 24 hours..
Check Stock

IFUN Jewelry Castable Resin for 405nm LCD 3D Printer Jewelry Cast Lost Wax Cast SLA UV Cure Photosensitive Resin Liquid Red 500g

  • Sharp and Strong: Small wire cutter has an 1/2" long heat-treated carbon steel jaw with angled head design. Flush Cutter with improved blades design snips wire up to 16 AWG.
  • Precision Wire Cutter: Flush Cut Micro Cutter with angled head is nice for tight cuts. Excellent for zip ties, beading wire, trimming circuit boards, jewelry making, model kit, Ethernet cable preparation, electronics work and any that requires a flush cut.
  • Non-slip Hand Grips: Wire snips with non-slip hand grips with curved fore-edge provide comfort and control.Compact design increases access in confined areas.
  • Spring-loaded: Steel return spring for increased comfort during repetitive cutting.
  • Tips: To ensure the durability of the cutters, not for use on steel wire, do not use it to cut very hard or big gauges wires.
Check Stock

Wire Cutters 2 PACK, 6 inch Wire Cutters Set, HOUSERAN Side Cutters Flush Cut Pliers, Spring Loaded Cutting Pliers with Non-slip Red Handle, Wire Cutters Heavy Duty for Jewelry Making, Crafts, Zip Tie

  • 【Precision Wire Cutter】 6 inch wire cutters, flush cut pliers are made of high carbon steels. The blade of the dykes cutter is long enough to get a nice reach.
  • 【Ultra Sharp Wire Clippers】The cutting edges of the wire cutters set, dikes wire cutters are high-frequency hardened, sharp and well machined. These Cutting Pliers, electrical wire cutters can easily snip wires up to 12 awg.
  • 【Easy to use one handed】Reset spring loaded zip tie cutter, wire snips reduce hand and wrist fatigue for easy one-handed operation. These plastic cutter, dikes make the job so much easier and faster.
  • 【Comfortable grip and Non slip】The longer handle length of the cutting pliers, wire clippers give good leverage, and yet the ergonomically designed non-slip handles are thin and lightweight so it’s easy to keep on you.
  • 【Side Cutters Application】Good quality diagonal cutters, samll wire cutters are perfect for flush cutting stems of artificial flowers and other wired products used in crafting and decorating. Works well for many things like trimming plastic parts, small wire, pc board and....
Check Stock

JEDIST Flush Cutter, Sprue Cutter, Micro Cutter, ESD Wire Cutter, Stainless Steel Cut Tools with Spring Silicone Handle for Electronics Jewelry Model Craft Soldering Metal Plastic(Jed-05ESD)

  • The type of Jed-05ESD is a universal flush cutter tool. It is a anti-static and demagnetized ESD flush cutter which made of martensitic stainless steel and designed a inverted V-shape edges. The thickness of steel plate is 0.12 inch and the length of cutting edge is 0.51 inch. The rigidity is HRC56-58 and the weight is 2.47 oz. It can cut through copper wire with diameter of 1.3mm and iron wire with 1.0mm. It can cut above 10 AWG stranded electrical wire..
  • This wire cutter is made of martensitic stainless steel (8Cr13MoV).The steel is hardened through heating and quenching. This technology helps to enhance sturdiness and gives it a natural level of resistance against rust and corrosion even in marine, high temperature and humidity environment. The body of steel is heat-treated and bright-treated in vacuum and acid-free condition and its rigidity is 42-50HRC. The blade is heat-treated by high frequency wave and its rigidity is 56-58HRC..
  • The handle of flush cutter is ergonomically made. The cover of cutter grip is made of silicon which is non-slip and flexible. This sprue cutter is loaded a stainless steel spring that returns the jaws to the open position automatically and the joint is lubricated by oil. The cutting blades are perfectly aligned and the ....
Check Stock

QWORK Cable Cutter, 24 Inch Stainless Steel Wire Rope Cutter for Cutting Steel Wire

  • Wire Cutters Material: 6 inch Wire cutter is forged by High-Carbon Steel, solid and durable. And snips cutters with plastic coated handle for comfortable and girp in daily use time..
  • Side Cutters Spring Loaded Design:The Spring-loaded side cutting diagonal pliers reduces muscle fatigue for easy one-handed operation..
  • Flush Cutter Size:6 inch cutting pliers are good size to fit in the hand of an average adult and not so heavy as to be a struggle to hold..
  • Diagonal Cutters Edge:Edge is high-frequency processing, sharp and durable, suitable for plastic flash,.electronic circuit welding thread pruning..
  • Floral Wire Cutter Application:Small wire cutters are for beaders, jewelers, electricians and crafters.Suitable for cutting plastic or soft electrical wire, not suitable for hard electrical wires..
Check Stock

EliteSRS Wire Cutters with Hand Guard 8 L

  • Lightweight Cable Cutter: Trim and resize your jump ropes with ease with this cable cutter that's plenty sharp and can cut through cables, metal or....
  • Multiple Uses: The wire cutter features cushioned rubber handles to protect your hands and help reduce hand fatigue.
  • Easy to Use: The durable steel wire cutter features a locking arm to ensure it stays closed.
  • Can be thrown in your gym bag, jump rope storage bag,....
  • Elite Fitness Accessories: Our accessories help improve your jump rope skill, jumping experience or rope performance.
  • EliteSRS: Founded in 2016 by former competitive jumper and coach Matt Hopkins, EliteSRS provides jump ropes for athletes to excel at the highest....
Check Stock

Multitool, 17-in-1 Multitools Pliers with Nylon Sheath, Professional Multi-tool for Survival, Camping and Hunting, Gifts for Men Dad Husband by PERWIN

  • ... has a hardness of 54 +/- 2 on the Rockwell Hardness Rating and is also highly rust-resistant. The wire cutter is made of Tungsten YG12, so it can cut through mild steel hardware surprisingly well..
  • 【ONE-HAND OPENING】You can access and open the camping multitool with a single hand, a unique feature in this multi-tools. It exhibits a buttery-smooth action that is so pleasing, that you would barely stop playing with it. However, security comes from the strong liner system that keeps the tools closed, which is useful to prevent accidentally closing during operation..
  • 【CONVENIENT CARRYING】The PERWIN TR-01 is a burly multitool, thicker and wider than many others. Because of that, we offer the nylon sheath for carrying it on a belt or a pack strap. Every detail ensures this sheath is long-lasting, dependable, and easy to use. A high-grade metal rivet snap closes tightly and keeps your tool secure..
  • 【PRACTCAL GIFTS FOR MEN】If you’re an Adventure Seeker, or if you want to up your emergency-preparedness game, we bet you’ll like this survival multitool. It’s also a practical gift for men, fathers, and teenage boys o....
Check Stock

Klein Tools VDV226-107 Compact Ratcheting Modular Data Cable Crimper / Wire Stripper / Wire Cutter CAT6 CAT5 CAT3 Flat-Satin Voice Cable

  • Wire Stripper, Wire Crimper, Wire Cutter for CAT3, CAT5e, CAT6 and flat-satin voice cable.
  • Crimps RJ45 and RJ11/12 modular connectors.
  • Full-cycle ratchet mechanism ensures complete connector termination.
  • Compact, ergonomic design for natural, single-hand operation.
  • Direct lateral crimp action provides more even, precise contact termination across all pins.
Check Stock

Felco Cable Cutter (F CDO) - Heavy Duty Strength Steel Wire One-Hand Cable Cutter with Non-Slip Grip (5mm) , Black

  • PREMIUM COMPONENTS - Engineered and designed in Switzerland, this cable cutter is constructed of premium steel components designed for excellent performance and long-lasting durability. This cutter is specifically designed for cutting barbed wire..
  • HIGH-QUALITY DURABILITY - This cable cutters' steel construction with a plastic non-slip grip is designed to last. The design features easily replaceable parts and can be regularly maintained with Felco's synthetic lubricant for maximum longevity..
  • FOR BARBED WIRE - The premium cutting tool has a 0.2 inch (5mm) diameter that is ideal for clipping smaller cables and wire. Unique triangular cutting jaws never leave a frayed end on cut cables.
  • ERGONOMIC DESIGN - ERGONOMIC DESIGN - This wire snipper is designed to minimize stress on your hands. The cutter features a thumb catch designed for one-handed operation, as well as a supple spring for greater comfort..
  • VERSATILE USE - Unlike some cutting tools, this wire cutter works for a large variety of uses. Whether cutting copper cable for a circuit breaker or you need to adjust the br....
Check Stock

INTSUPERMAI Manual Guillotine Shear Gauge Sheet Metal Plate Cutting Cutter Heavy Duty Metal PVC Stainless Steel Plate Circuit Board PCB Cutter Cutting Tool

  • Wire Cutters Material: 6 inch Wire cutter is forged by High-Carbon Steel, solid and durable. And snips cutters with plastic coated handle for comfortable and girp in daily use time..
  • Side Cutters Spring Loaded Design:The Spring-loaded side cutting diagonal pliers reduces muscle fatigue for easy one-handed operation..
  • Flush Cutter Size:6 inch cutting pliers are good size to fit in the hand of an average adult and not so heavy as to be a struggle to hold..
  • Diagonal Cutters Edge:Edge is high-frequency processing, sharp and durable, suitable for plastic flash,.electronic circuit welding thread pruning..
  • Floral Wire Cutter Application:Small wire cutters are for beaders, jewelers, electricians and crafters.Suitable for cutting plastic or soft electrical wire, not suitable for hard electrical wires..
Check Stock

SHALL 3-Piece Bolt Cutters, 14\ Heavy Duty Bolt Cutter, 8\ Mini Bolt Cutter, 8\ Wire Rope Cutter, Ergonomic Handle, Security Lock, More Efficient Leverage & Adjustable Opening, Carrying Case Included

  • What Included: 14” bolt cutter, max jaw opening is 19/32 in (15mm).
  • 8” wire cutter, max jaw opening is 7mm (1/4 in).
  • 8” wire rope cutter, max jaw opening is 7/16 in (11mm).
  • Efficient Leverage: Classic leverage design and precisely aligned blades deliver stronger cutting strength. Cutting with less effort, much quicker and improve work efficiency.
  • Security Lock & Adjustable Opening: Built-in handle lock for easy storage when not in use (8" bolt cutter & 8" wire rope cutter), featured with tightening adjustment screw for adjusting minimum opening in order to prevent excessive force while cutting (14" bolt cutter & 8" wire cutter).
  • Ergonomic Handle: PP+TPR insulated handle with ergonomic and two-color unique design, anti-slip and offer better hand feel, provide greater control and comfort while cutting.
  • Carrying Case: Made of black double-deck 600D fabric with high quality for storing these 3 cutters, featured with straps inside for organized storage. Easy to carry, featured with lanyard.
Check Stock