Top Single phase Motor Capacitors

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

Nema34 8N.m Closed Loop Stepper Servo Motor 116mm 6A 2 Phase+HSS86 Hybrid Servo Motor Driver Controller 70V/AC 100V/DC CNC Kit for CNC Router Engraving Milling Machine

  • ATO 2 hp (1.5 kW) VFD, single phase 110V/120V input, 1 phase or 3 phase 220v-240v output, designed for driving single/three phase AC motor via 120v power supply.
  • 【Voltage&Frequency】Input voltage: 1 phase 120V AC ±15%.
  • Output voltage: 1 phase or 3 phase 220V AC ±15%.
  • 【APPLICATION】 ATO 110V VFD Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】 Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】 If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

ATO 3 hp 2.2kW 10A VFD, Single Phase 120V Input, 1phase/3phase 220V Output Variable Frequency Drive Motor Control

  • ATO 3 hp (2.2 kW) VFD, single phase 110v/120v input, single phase or three phase 220v output variable frequency drive, specially designed for 120v power supply.
  • 【voltage&frequency】Input voltage : 1 phase 120V AC ±15%.
  • Output voltage: 1 phase or 3 phase 220V AC ±15%.
  • 【APPLICATION】: ATO 110V VFD Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】: If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

Grizzly Industrial G0449-37\ 10 HP Drum Sander

  • Sanding drum motor: 10 HP, 240V, single-phase, TEFC, 1725 RPM.
Check Stock

LAPOND High Performance VFD Inverter VFD Drive 2.2KW 220V 3HP 9.6A,Variable Frequency Drive for Motor Speed Control,SVD-PS Series

  • This is single phase VFD with single phase 220V INPUT and three phase 220V OUTPUT,ONLY work with 3 phase 200-250V asynchronous motor,If your motor is heavy load, pls choose a higher Horsepower vfd than your motor's or contact sales for model selection suggestion..
  • SVD-PS Series VFD has better performance Vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency.
  • support fast accelerate/deccelerate with external optional braking resistor(100W ≥70Ω) and external potentiometer(10K).
  • Rich of digital and analogy control terminals for versitile control, well controlled fans produce low acoustics noise.The fan only work in VFD running status..
  • Application : spindle motor,lathe,milling,pumps,treadmills,conveyors,winding machine, mixer, extruder, slitter, compressor, ventilator,elevator,centrifuger and other machines..
  • We are the original factory,any technical issues do not hesitate to contact us.
Check Stock

DC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51

  • High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
  • Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
  • Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
  • Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
  • High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.
Check Stock

LM YN AD8302 Wideband Logarithmic Amplifier Wideband Linear Multiplier Phase Detector Module Low Frequency to 2.7G for OPA695

  • ...ons. It requires few external components and a single supply of 2.7 V–5.5 V. The ac-coupled input signals can range from –60 dBm to 0 dBm in a 50 ohm system, from low frequencies up to 2.7 GHz. Both subsystems have an output bandwidth of 30 MHz, which may optionally be reduced by the addition of external filter capacitors. 003cbr003e.
  • The AD8302 can be used in controller mode to force the gain and phase of a signal chain toward predetermined setpoints.003cbr003e.
  • The AD8302 includes a phase detector of the multiplier type, but with precise phase balance driven by the fully limited signals appearing at the outputs of the two logarithmic amplifiers. Thus, the phase accuracy measurement is independent of signal level over a wide range. The signal inputs are single-ended, allowing them to be matched and connected directly to a directional coupler. Their input impedance is nominally 3 kΩ at low frequencies. 003cbr003e.
  • The phase and gain output voltages are simultaneously available at loadable ground referenced outputs over the standard output range of 0 V to 1.8 V. The output drivers can source or sink up to 8 mA. A loadable, stable reference voltage of 1.8 V is available for precise repositioning of the output range by the user.003cbr003e.
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

Grizzly G9933 Three Spindle Shaper

  • Motor size: 3 H.P. TEFC Single Phase 220V.
  • Working size of table: 15-Inch x 32-Inch.
Check Stock

Grizzly Industrial G0791-12" X 36" Combination Gunsmithing Lathe/Mill

  • Lathe motor: 2 HP, 220V, single-phase, 8.5A.
  • Mill motor: 3/4 HP, 220V, single-phase, 4.5A.
Check Stock

Grizzly Industrial G0958-8" Combo Planer/Jointer with Helical Cutterhead

  • Motor: 1.5 HP, 120V/240V, single-phase, 15A/7.5A, prewired 110V.
Check Stock

6Pcs L298N Motor Drive Controller Board DC Dual H-Bridge Stepper Motor Control and Drives Module for Arduino Micro:bit Smart Car Robot UNO MEGA R3 Mega2560

  • ★L298N as main driver chip makes strong driving ability and strong anti-interference,dual-channel h-bridge driver working mode creates higher working efficiency,,drive stepper dc motors to work.to avoid damage the voltage stabilizing chip, please use an external 5v logic supply when using more than 12v.
  • ★Dual-channel H-bridge driver working mode creates higher working efficiency..
  • ★To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • ★Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • ★L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
Check Stock