Top Single screw Extruder

JG AURORA Artist-D IDEX 3D Printer Dual Independent Extruder Quick Nozzle Replacement Direct Feed Filament Linear Rail Easy Assemble Support PLA TPU PETG Print Size 11.81 x11.81 x13.38

  • ★Large Build Volume★ large single models up to 300mm x 300mm x 340mm, or by utilizing its 'double' or 'mirror' modes, print two of the same model....
  • ★Quick Nozzle Replacement★ Featuring an Extruder module with an innovative one-button 'Nozzle Eject' system, Artist-D allows you to easily swap....
  • ★Dual Z-axis Design★ Two Z-axis screws and stepper motors drive the vertical axis of the Artist D that will improve accuracy and precision,....
  • ★Direct Drive Extruder★ Less torque from the motor is required to push the filament. It is capable of handling a variety of materials including....
  • ★Easy to Assemble★ The Artist-D requires no special skills to assemble, only 3 steps to assemble, whether you are a 3D printing enthusiast or a....
Check Stock

3D Printer 3 in 1 Out Multi-Color Extruder Three Colors Switching Hotend Compatible with Titan Extruder and Bulldog Bowden Extruder 1.75mm

  • Thermistor:100K NTC 3950, main heat sink block 60*27*27mm.
  • This extruder kit can be used as single color filament printing, dual colors filament printing or 3 colors filament switching printing, but not for....
  • Bowden feeding, Compatible with Bulldog, Titan or other types of Bowden extruder (Bulldog extruder is recommended).
  • Color switching is fast and stable, without significant print quality defects..
  • Firmware modification is simple, easy to use.
Check Stock

Sovol SV01 Upgraded 3D Printer 95% Pre-Assembled with Direct Drive Extruder Meanwell Power Supply Glass Plate & Built-in Thermal Runaway Protection 280x240x300mm

  • ★ Direct Drive Extruder ★: Sovol SV01 features with direct drive extruder and dual Z lead screw, greatly increase its printing stability and....
  • ★ Meanwell Power Supply ★: Built-in branded Meanwell power supply ensures stable and sufficient power, heat up the hotbed and nozzle fast.....
  • ★ Removable Glass Plate ★: This 3D printer comes with a flat glass plate on the regular heated bed, greatly resolving warped bed issues. No matter....
  • ★ Semi-Assembled Kits ★: Sovol Direct Drive Extruder 3D Printer comes with several partially assembled kits, just only take you at most 30 minutes....
  • ★ Sovol Support ★: All of our products are shipped to the consumer directly from the manufacturer, we provide lifetime technical assistance.....
Check Stock

Haldis 3D Dual Drive Gear Extruder for 3D Printer MK8 V6 CR10 1.75mm TPU/TPE Flexible Filament Without Motor (DDB Left)

  • 1.【Transparent Design】: Transparent and cool design, double gear extruder, when working, you can watch the printing filament go through to see how it works. The transparent case is very practical and looks beautiful..
  • 2.【Dual Gear Extrusion】: Two stainless steel wheels grab the filament from both sides, high extrusion force, ensure smooth feeding and provide fast retraction, after a lot of trial and error improvements, we successfully improved the gear bite problem, improved The durability and reliability of the gears reduce the consumption of our gears and extend their service life..
  • 3.【Adjustable Pressure Spring】: Easily adjust the clamping force of the filament, improved adjustment thumb screw, more comfortable adjustment and more convenient to use..
  • 4.【High Quality Material】: Transparent hard plastic shell and high quality metal extrusion wheel parts, the transparent material looks very beautiful and beautiful. Lightweight: only 70 grams. It reduces the stress on the printer and is extremely easy to assemble..
  • 5.【Widely Compatible】: Compatible with most DIY ....
Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • 3D Printer Extruder – Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
  • 100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
  • Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
Check Stock

Junco Intelligent Industrial Grade 3D Printer Model X-max,5 Inch Touchscreen,WiFi Precise Printing with ABS,PLA,TPU,Flexible Filament,300x250x300mm

  • Build Volume 11. 8''x9. 8''x11. 8''(300x250x300mm).
  • Filament Types PLA, ABS, TPU, PETG, Nylon, PC, Carbon fibber, etc..
  • Full metal support more stable than plastic support.
  • Aviation aluminium, CNC machining aluminium alloy.
  • Super big desktop 3d printer, for Education Institutions for Hands-on, Project-Based Learning, Designers, Tinkerers, Hobbyists, & Home Users, Advanced....
Check Stock

Redrex Ender 3 All Metal Bowden Extruder Tension Adjustable with Tube and Stiff Bed-Leveling Springs for Ender 3,Ender 5,CR10 Series 3D Printers

  • All Metal Extruder Replacement for Ender 3 Ender 5 CR10 Series:This durable aluminum extruder frame works more stable than plastic parts..
  • Adjustable Extrusion Spring Tension Design: The extrusion spring tension could be adjusted by tighten the screw..
  • Upgraded Stiff Bed Leveling Springs:It provides stronger tension and longer sevice life than the stock ones..
  • High Quality Bowden Tube :It was made of highly purified PTFE(Poly Tetra Fluoro Ethylene) material,it feeds the filament smoothly..
  • Recommend filament materials:PLA/ABS/Wood/Hips/Flexible/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy..
Check Stock

Redrex Dual Gear Extruder Metal Drive Feeder Upgrade Kit for Creality Ender 3 V2 Ender 3 Pro CR10 Series 3D Printer TPU Filament Supported

  • 【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
  • 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
  • 【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and....
  • 【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 5 Pro,CR10 S series 3D printer..
  • 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139..
Check Stock

Iverntech Upgraded Dual Drive Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer

  • Dual-drive Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385.
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament.
  • Notification: Do not adjust tension of hand twist screw too tight when you print soft filament, otherwise the filament wiring will be winding on the wheel. Manually adjust to a suitable tension for your 3D printer.
  • Suitable for most 3D printers and filaments.
  • Packing with: 1x Bowden Extruder, 1 x Universal Stepper Motor Bracket.
Check Stock

Entina X40 IDEX 3D Printer, Independent Dual Extruder 3D Printer with TMC2208 Silent Driver, 4.3' Touch Screen, PEI Spring Steel Magnetic Platform, Built-in Camera, Wi-Fi Cloud Printing 300x300x400mm

  • 【Independent Dual Extruder 3D Printer】The X40 idex 3d printer is designed with independent dual extruders that supports 4 printing modes: single nozzle printing.
  • duplication mode printing and mirror mode printing. You can print two different types materials and colors model, or print two same models at the same time..
  • 【Large Build Volume】Ultra-large forming volume allows you to print single model up to 11.8"(L) x 11.8"(W) x 15.7"(H) / 300 x 300 x 400mm, which provide enough space for your 3d printing creation, give you greater freedom to print. The large 3d printer with dual extruder can use PLA, ABS, TPU, PVA, PETG, HIS, Nylon, Wood, and Metal..
  • 【Auto Leveling & Super Silent】X40 dual extruder 3d printer equipped with intelligent leveling system, which can automatically compensate for the printing height of different points of the hotbed, friendly use for both expert-level and beginners. 32 Bit motherboard with TMC2208 silent driver provides a quieter printing at less than 50db noise level..
  • 【Build-in Camera & Wi-Fi Printing】Our big 3d printers X40 equipped with Wi-Fi chip and built-in camera that helps to keep an eye on prints in case of incorrect settings, and helps to pause or abort printing via Wi....
Check Stock

Redrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]

  • 【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
  • 【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
  • 【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
  • 【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..
Check Stock

Bowden Extruder Upgraded V3.0 Dual Drive Gear High-Performance Parts for CR10,Ender 3 Series,Anycubic Mega S, I3 Mega Chiron,Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer

  • Latest Dual Drive Extruder for Most 3D printers..
  • Update1: SIMAX3D Dual Gear Extruder V3.0 make an independent feeder inside to make filament wiring go inside and out super smoothly..
  • Update2: SIMAX3D Dual Drive Extruder V3.0 change the bowden buckle to pneumatic connector, you’re able to switch only this part after long time use instead of the whole extruder..
  • Update3: This Geared Extruder has an angle for Z-rod which is adapted to those 3D Printer who has an close Z axis installed like Ender 3 old version..
  • Package Include: User Manual*1. SIMAX3D Dual drive extruder set *1.
Check Stock