Top Skil Multi Functional Laser Level

Huepar Cross Line Laser Level, Green 360° Horizontal and Two Vertical Lines, Self-Leveling Alignment Multi Line Laser Tool, Li-ion Battery with Type-C Charging Port & Hard Carry Case Included - B21CG

  • ⭐【1H / 2V Multi-line Laser for Wide Application】: The laser level B21CG projects 360° horizontal line and two 120° vertical lines cover the floor, wall, ceiling around the room. The individual and combined laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle..
  • ⭐【Dual Power Methods & Type-C Charging Port】: Huepar B21CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging..
  • ⭐【Brighter Green Laser & Outdoor Pulse Mode】: This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a workin....
Check Stock

Huepar Fine-tuning Bracket Laser Level Adapter, Multifunctional Magnetic Pivoting Base with Adjustable Clip, 360° Adjustable Support with 1/4\-20 Male Threaded, Height Adjustment - PV10+

  • ...: The bracket with 1/4"-20 male thread, the maximum depth from the 1/4''-20 thread to the back of the bracket is 8.5cm. It is compatible with most cross line laser levels with 1/4" female thread. If your laser level has a 5/8" female thread, please purchase the conversion screw adapter AD5/8 separately..
  • ⭐【Multi-functional Auxiliary Back Clip】: A separate back clip included in the kit is compatible with most magnetic bases on the market, increasing the adsorption force of the magnets and stability. The Back Clip offers the ability to mount to any object up to 5cm thick. The vertical angle against the wall can be adjusted by the fine-tuning knobs as well as the opening size of the clip. A nail hole in the clip enables to be fixed firmly on the wall..
  • ⭐【Multi-directional Fine-tuning Bracket】: There are four fine adjustment knobs on the bracket, help to adjust the left and right position within 3cm, the front and back position within 5.5cm, the height within 9 cm, and the horizontal rotation 360°. An added locking knob enables to fix the working height and avoid sliding up and down. The graduations are marked in inches and centimeters for easy readouts..
  • ⭐【Multiple Installation Methods of the Bracket】: 1/4"-20 and 5/8"-11 female thread m....
Check Stock

ADVNOVO 3000mAh 18V SB18A Battery for SKil 18V Battery SB18A SB18C SB18B 18V Slide Pack Battery Replacement for Skil 18V Ni-Cd Battery 2888-10 7305-01 5995-01 9350-01 4570-01

  • ✎Type: Ni-MH✎Voltage: 18V✎Capacity: 3000mAh✎Wattage: 54Wh.
  • 『Compatible Charger Model』For skil 18 volt battery compatible with Skil original charger SC118 (SKU 310042) and SC118C-LI battery charger..
  • 『Replacement Battery Model』Replacement for Skil 18V Ni-Cd slide pack battery SB18C, SB18A, SB18B, 2610012349/1619X04714..
  • 『Compatible Tools』For skil SB18A battery replacement compatible with Skil 18 volt Ni-Cd tools, such as for skil circular saw, drill driver, reciprocating saw, flashlight, sander, jigsaw, recip saw. For Skil 18V Ni-Cd cordless tools 2887, 9350, 5850, 2810, 2888, 2895, 2897, 2898, 4570, 5995, 7305, 2860, 2888-10, 7305-01, 5995-01, 9350-01, 4570-01, 2887-B5, 2887-O5, 2887-B2, 2887-B4, etc..
  • 『Guarantee』30 days money back and 12-month warranty guarantee, Any problem, Please feel free to contact us. Contact us: any question click the "Ask a question" on our storefront or in "YOUR ORDER" options click the "contact seller"..
Check Stock

Twotrees Laser Engraver TR2 Pro 4 in 1 Rotating Module for Engraving Cylindrical Objects, Wine Glass, Tumbler, Ring,Y-axis Rotary Roller Module for TTS-25,TTS-55,TS2 Laser Engraving Machine

  • ...aser engraver machine is a high-precision and easy-to-use product designed for the engraving needs of laser engraving enthusiasts, designers, small and micro enterprises, and carpenters.By using laser engraver and this rotary module to achive all of your creativity..
  • Multi-functional: an engraving module that integrates four engraving functions: roller rotary, chuck rotary, sphere rotary, ring rotary. It can meet the clamping and engraving of various special-shaped workpieces, and solve the engraving needs of most users.
  • Such as wine glass, yeti tumbler, baseball bat, ring, ball, or mug with handle..
  • Highly Precise Engraving ： High-precision engraving can be achieved with different components. TR2 Pro Laser can hold the object tightly with a soft-pad covering jaws chuck, allowing smooth and efficient operation. The maximum vector engraving speed can reach 360°/s. The laser rotary module packs a precision stepper motor with a minimum angle of 0.45°, amazing detail on the engraving of the Chuck Rotary..
  • Wide compatibility : Default 80CM two types of motor adapters are suitable for different types of engraving machine inter....
Check Stock

Bosch Bluetooth Enabled 330-Foot Lithium-Ion Laser Distance and Angle Measurer GLM 100 C

  • UPGRADES: Features Bluetooth functionality to conveniently transfer and store measurements from the laser measurer to a smart device via free app. Also includes backlit display with tilt-screen technology for easy viewing in all directions..
  • PRECISION: The laser tool’s Precision Measuring Technology with extreme accuracy measures distances up to 330-feet to within 1/16-inch..
  • ACCURACY: The Bosch GLM 100 C features a built-In tilt sensor to displays 360-degree angle measurements in two axis allowing for more accurate measurements..
  • LEVEL: Option to add the R 60 digital level attachment to transform the GLM 100 C into a 24-Inch digital laser level (not included)..
  • VERSATILE: Offers ten measurement modes including length, area, volume, angle, min/max, continuous, single indirect height, single indirect length, combined indirect height, and multi-surface are measurement for maximum versatility..
  • Class IIa laser product, ≤1mW power output.
Check Stock

Superior Electric SW77 Aftermarket 20 Amp Trigger On-Off Switch Replaces Skil 2610321608, Ryobi & Ridgid 760245002

  • Skil Saw Replacement Switch replaces Skil 2610321608.
  • Trigger type switch with 4 internal terminals.
  • For Skil HD77 and HD77M Worm Drive Skil Saw.
Check Stock

Huepar Laser Detector for Line Laser Level, Digital Laser Receiver Used with Pulsing Line Lasers Up to 200ft, Detect Red and Green Laser Beams, Three-Sided LED Displays, Clamp Included LR-6RG

  • ✔️AVAILABLE FOR RED AND GREEN PULSE LASER- It is necessary to Turn ON the Pulse Mode of the laser level when using with Huepar LR-6RG laser receiver. This receiver allows detection of Red and Green pulse laser beams in difficult light conditions, distances up to 200ft (60m)..
  • ✔️CLEAR MULTI-SIDED READOUTS- Ergonomic design with display on the front, side and back of receiver, offers easier visual readout. This unit is outfitted with a dual-sided Bubble Vial on both the front and top, in order to more accurately determine the level..
  • ✔️PRECISE OPTICAL AND ACOUSTIC SIGNALS- This laser receiver features a user-friendly interface and is smart in its simple design. Optical and acoustic signals help to locate the laser plane quickly and accurately. The LED indicator provides a clear and accurate signal. Beep sounds will remind you when you find the target..
  • ✔️LONG BATTERY LIFE AND CLAMP HOLDER- The receiver comes with a 9V dry battery, providing you with about 70 working hours. There is also an automatic shut-off feature that power down the device after about 8 minutes of being idle to extend battery life. The attached heavy-duty clamp makes it easy to mount the detector to a rod or other target point..
Check Stock

Milwaukee Router Adapter for Festool & Makita Guide Rail

  • ROUTER TOOL COMBO KIT - Includes SKIL Router Table (SRT1039) and SKIL 10 Amp Fixed Base Corded Router (RT1323-00).
  • SKIL ROUTER TABLE - Equipped with Above the Table Adjustment, Integrated Bit Storage, Aluminum Mite Gauge Slot, Router Clamp, Starter Pin, and Two Featherboards for precise routing.
  • SKIL 10 AMP FIXED BASE ROUTER - Powerful 10 Amp, 2.0 HP motor provides smooth and accurate routing from start to finish.
  • equipped with soft start, speed control, and a live tool indicator.
  • TALL FENCE WITH ADJUSTABLE FEATHERBOARDS - Tall 16-inch aluminum fence measures 24 inches wide and handles tall stock with ease, complimented by two featherboards, adjustable MDF face plates, and starter pin and guard.
  • PRECISION ROUTING - Use the Router Table for the heavy routing and the Fixed Base Router to complete the task.
Check Stock

T POWER 5v Ac Dc Adapter Charger Compatible with SKIL 2356-01, 2354-12 iXO & Black+Decker & Power Screwdriver BDCS30C BDCS40BI 4-Volt MAX & SKIL 2356-01, 2354-12 iXO 2354-08 Pink iXO Power Supply

  • T POWER - SPECS : Input Voltage Range: AC 100V - 240V ( 5V ) 3V~6V Compatible //⚠️ (( NOTE !! Please Check Connector Photo! . We provide Smart connector plug tips. This item fits New & Old Models ))).
  • Compatibility: SKIL 2354-10 iXO Vivo Power Screwdriver with Wine Opener / Skil 2354-04 2354-06 2354-01 2354-02 2354-05 2354-08 2354-10 2354-07 iXO.
  • SKIL 2354-08 Pink iXO 4V Max Lithium-Ion Palm-Sized Cordless Screwdriver / SKIL iXO 4V Max Lithium-Ion Palm-Sized Cordless Screwdriver 2354-01 2354-02 2354-12 2354-07 2354-08 2356-01.
  • P/N: 9068351 MODEL: SSA-6P-05-US 050060 / SKIL 2356-01 , 2354-12 iXO Power Screwdriver.
  • BLACK+DECKER BDCS30C BDCS40BI 4-Volt MAX Lithium-Ion Cordless Rechargeable LED Screwdriver.
Check Stock

SKIL RT1323-01 Router Table and 10Amp Fixed Base Router Kit

  • ROUTER TOOL COMBO KIT - Includes SKIL Router Table (SRT1039) and SKIL 10 Amp Fixed Base Corded Router (RT1323-00).
  • SKIL ROUTER TABLE - Equipped with Above the Table Adjustment, Integrated Bit Storage, Aluminum Mite Gauge Slot, Router Clamp, Starter Pin, and Two Featherboards for precise routing.
  • SKIL 10 AMP FIXED BASE ROUTER - Powerful 10 Amp, 2.0 HP motor provides smooth and accurate routing from start to finish.
  • equipped with soft start, speed control, and a live tool indicator.
  • TALL FENCE WITH ADJUSTABLE FEATHERBOARDS - Tall 16-inch aluminum fence measures 24 inches wide and handles tall stock with ease, complimented by two featherboards, adjustable MDF face plates, and starter pin and guard.
  • PRECISION ROUTING - Use the Router Table for the heavy routing and the Fixed Base Router to complete the task.
Check Stock

Skil 2610321608 Worm drive switch for HD77

  • Please reference tool diagram manual to ensure the proper fit before purchasing.
  • Included: (1) SKIL 2610321608 Worm drive switch.
Check Stock

SKIL 14 Amp 7-1/4-Inch Circular Saw - 5180-01

  • 14-Amp motor for more power and performance than the SKIL 5480.
  • 15% weight reduction vs. SKIL 5480 reduces user fatigue.
  • 51-Degree bevel with positive stop at 45-Degree for greater cut capacity that SKIL 5480.
  • Improved dust blower keeps line of cut free of sawdust.
Check Stock