Top Sleeved Plug Valve

Mustang Carbon Fiber Trunk Spoiler, GT350 Track Pack Spoiler Carbon Fiber, 2015 Mustang GT Spoiler for 2015-2021 Rear Trunk Wing Racing Spoiler, fit V6, EcoBoost, GT and GT350 2015-21

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. T....
Check Stock

Inflatable Air Valve Replacement Screw Air Valve for Inflatable Rubber Dinghy Raft Pool Boat Fishing Boats 2pcs

  • High Quality: This Inflatable Air Valve is made of quality high dense ABS plastic, sturdy, anti and durable..
  • Size: Diameter of Thread Part: Approx. 20 mm / 0.78 inch. Length of Thread Part: Approx. 16 mm / 0.62 inch..
  • Cap Design: The fine design with a valve cap ensures antileak inflation. The bottom of the air plug has a rubber mat which can prevent leaks more effectively, give you safer protection..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good performance and long serve life..
  • Wide Application: This Inflatable Air Valve fits most inflatable boat, raft, rubber dinghy, etc. Package Included: 2 * Air Valves. Comes in pair, good replacement accessory for your inflatable boat..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good perf....
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock

LitKiwi 5PCS Beer Keg Coupler Check Valve & 5PCS Beer Washer Gaskets,Gas Check Valves Beer Keg Coupler Accessories Kit for Sankey Couplers D Type Coupler Replacement

  • ★【Food Grade Marterial】The check valve and washer both made of Food grade silicone,which is soft and smooth, durable and anti-kinking, safe and non-toxic..
  • ★【Easy & Efficient】The check valve install on the inside of the beer coupler on the air/gas hose nipple,to prevents liquid from entering your gas line.The gasket can be firmly sleeved on the inside of the joint and is not easy to slip off..
  • ★【Professional Accessories】Work well for D Type Coupler,Taprite and Krome Sanke Couplers,for most US Sankey Coupler..
  • ★【Some Suggestion】Because these two accessories are used in food equipment, it is recommended to change them once a month or even half a month, and keep them clean and hygienic at all times, so as to have a better experience..
  • ★【Package Include】 5PCS Gas Check Valve & 5PCS Beer Washer Gaskets with a plastic box..
Check Stock

Jtuxcke Air Mattress Valve, Air Valve 3 in 1 Inflatable Air Valve Secure Seal Cap Air Valve Caps Plugs Replacement for Inflatable Airbed Mattress, Sturdy for INTEX Inflatable Airbed Mattress

  • One Way: The 3 in 1 air valve is a one-way inflation valve, good for quick inflation..
  • The air mattress valve design ensures anti-leak inflation.Easy to fit, good performance and long serve life..
  • Designed for certain branded inflatable airbeds, such as for inflatable valve intex air mattress plug. Applicable models: 66723,66724,66725,68926,66767,66768,66769,66770,69710,66721,66720,67736,66972,66974,69710,67716.
  • Anti-leak: Air mattress valve features high secure air protection, the valve cap design ensures anti-leak when air inflation..
  • Easy To Install And Replace: 3 in 1 air valve secure seal cap It will fit into a hole about 4.28 cm in diameter and has a plug cover.
  • Very easy to install and replace,you will find it convenient..
Check Stock

Tool Daily High Pressure Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose, 4500 PSI

  • High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4500 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread.
  • 3/8’’ quick coupler socket + 3/8’’ male NPT thread..
Check Stock

BUZIFU 2Pcs Air Valve 16mm Boston Inflatable Valve Replacement Universal Spiral Boat Air Valve, One-way Inflation Replacement Boston Screw Valve for Inflatable Rubber Dinghy Kayak Boat Airbeds

  • ★【Quickly Inflation & Deflation】: Boston screw valve can be installed in the piston hole of about 16.5mm / 0.64 inches. The dinghy valve is a one-way inflation valve, good for quick inflation and deflation, saving you time. Please carefully confirm the size of the air nozzle required for your kayak before purchasing, the diameter of the air nozzle is 16.5mm.
  • ★【Durable & Anti-Seawater Corrosion】: Air valve inflatable boat spiral is made of high-quality rubber material. Airbed replacement valve is durable and has the characteristics of anti-seawater corrosion, anti-leakage and long service life..
  • ★【Leakproof Design】: The inflatable air valve replacement screw is designed to be closed. There is a rubber pad at the bottom of the air plug. After inflation, the rubber pad at the bottom of the 16.5mm screw air valve will automatically fit the edge of the air plug, which can prevent leakage more effectively and provide you with Safer protection..
  • ★【Easy to Install & Disassemble】: Boston air valve adopts spiral design, easy to install and disassemble, you just need to rotate to the right to remove the old Boston Valve, then rotate the new Boston Valve to the left..
  • ★【Suitable for Most Inflatable Boat】: The airbed valve cap replacemen....
Check Stock

Intex Air Mattress Plug, Intex Inflatable Valve Cap, Intex air Mattress Valve Cover, Inflatable Air Valve Caps Screw Plugs Replacement, 3 in 1 Airbed Valve Secure Seal Cap Screw

  • STURDY AND DURABLE: 3 in 1 air mattress cap replacement is made of high quality plastic material, secure, sturdy, anti- and durable..
  • ONE WAY INFLATION VALVE: This intex air mattress valve cover is a one-way inflation valve, good for quick inflation..
  • EASY TO INSTALL AND REPLACE: This intex air mattress cap replacement will fit into a hole that is about 4.28 cm diameter, and has a plug cap. Very easy to install and replace, you will find its convenience..
  • USE RANGE: The Intex air mattress valve cover is designed for certain branded inflatable airbeds, such as for Intex airbeds. Suitable for airbed mattress with 45mm holes..
  • ANTI- LEAK: This intex inflatable valve cap features high secure air protection. The valve cap design ensures anti-leak when air inflation..
  • USE RANGE: The Intex air mattress valve cover....
Check Stock

Cal-Van Tools 39300 Ford Triton 3 Valve Insert Set 1 Pack Brown

  • For use with 2004-2008 Ford three valve 5.4 L and 6.8 L engines built before 10-9-07 and 3 valve 4.6 L engines built before 11-30-07 found in many....
  • The spark plug tends to break off in the cylinder head during maintenance. If this problem is not repaired properly it can result in damaged or....
  • Includes 8 inserts, core drill, tap, guide and insert plug..
Check Stock

WADEO Cooler Drain Plug Hose Connection, Replacement Drain Plug with Garden Hose Shut Off Valve for YETI Cooler, YETI Tundra Cooler, Roadie Cooler, Tank Cooler and RTIC 20QT, 45QT, 65QT Cooler

  • 3/4’’ Convenient ON/OFF Valve: We provide a shut off valve, it can be connected to the 3/4’’ garden hose, which brings you a convenient and quick way to turn the water flow on and off. You don’t have to rotate the whole plug out and put it back..
  • Compatibility:This cooler drain plug replacement is suitable for YETI Cooler, YETI Tundra Cooler, Roadie Cooler, Tank Cooler and RTIC 20QT, 45QT, 65QT Coolers..
  • Good Replacement: The replacement drain plug is made of durable ABS and silicone seal material, it is very strong and leak-proof, perfect for replacing your old or broken cooler drain plugs and can be used for a long time..
  • Convenient Design: Our drain plugs improved finger knob design, it helps your finger open and close the drain easier. Easy to install and tighten the leak-proof drain plug is great for prevent the cold loss from your coolers..
  • Package Include:1*Small drain plug, 1*Big drain plug, 1*Shut off valve..
Check Stock

Valve Cover Set with Bolts & Oil Cap & Gaskets & Spark Plug Tube Seals & PCV Valve Compatible with 2004-2016 Nissan Armada NV2500 NV3500 Pathfinder Titan Infiniti QX56 5.6L # 13264-ZE01A 13264-ZE00A…

  • ✅【Valuable Choice】 Complete Valve Cover Set (with Oil Filler Cap & Bolts & Gasket & Spark Plug Seals & PCV Valve) Ready to install. Valve cover comes with Pre-installed GASKETS & SPARK PLUG TUBE SEALS to make your install easier. Highly durable material to meet or exceed OE standard quality and performance requirements. High sealing performance and no more leaks to protect your car engine better. Fits well and high performance make your car run powerfully and stably..
  • ✅【PACKAGE】 Valve Cover Kit includes: 2 * NEW Engine Valve Covers (Driver side & Passenger Side) + 2 * NEW Engine Valve Cover Gaskets + NEW Bolts + 1 * New Oil Cap + NEW Spark Plug Tube Seals Pre-installed + NEW PCV Pre-installed 【NOTE】 Please reference to the first picture as shown..
  • ✅【EXCAT MATCH】Engine: VK56DE V8 5.6L DOHC 2005-2015 Nissan Armada 2012-2017 Nissan NV2500 2012-2017 Nissan NV3500 2008-2012 Nissan Pathfinder Armada 2004 Nissan Pathfinder 2004-2015 Nissan Titan 2004-20010 Infiniti QX56.
  • ✅【OE Part NUMBER】 Valve Cover: 13264-ZE01A, 13264-S010, 13264-ZE00A, 13264-S000 Gasket: 132707S000....
Check Stock

YETI and RTIC Compatible Large & Small Drain Plug Combo Pack - Compatible Replacement Plugs for RTIC's and Yeti's New 2 Drain Coolers - Yeti Cooler Accessories

  • Compatibility: The RTIC Compatible Large & Small Drain Plug Combo Pack Is An Improved Design That Fits Specifically With the RTICs New 2 Drain Coolers..
  • Package Contains: Yeti bucket accessories has the package which includes Both RTIC Replacement Plugs Used in the “Dual Drain Plug System” – One Small Plug and One Large Plug..
  • Perfect Size: Yeti cooler plug and RTIC cooler plug has an Oversized Drain Plug on One Side of the Cooler to Allow Faster and Easier Draining. Yeti stopper helps to stop the water and easy to drain..
  • Good Replacement: The Yeti Accessories Beast Cooler Dual yeti cooler drain plug Kit Contains Both the Large and Small Drain Plugs Specifically Made to Be Compatible With the RTIC Coolers With Dual Drain Valve System..
  • Easy to Use: Yeti Drain hose or yeti drain plug has a Standard Sized Drain Plug on the Other Side With an Integrated Vacuum Relief Valve for Easier Opening of the Cooler Lid When the Plug Is Pressed..
Check Stock