Top Slide Gate Plate

Skelang 2-Set Gate Hinge 7”, Weld-on Hinge Barrel Style for Swing Gate and Trailer Ramp Gate, Total Load Capacity 4400 Lbs

  • MATERIAL: The barrel gate hinge is made of cold rolled steel and covered black electrostatic powder coating, rust and corrosion resistant.
  • SIZE: Total length is 7 inches, barrel diameter is 1-3/8 inches and pin diameter is 3/4 inches, mounting plate gap is 1-1/2 inches.
  • SMOOTH ROTATION: The gate hinge pair features grease fitting and an internal ball bearing, making for a smooth and squeak-free operation.
  • EASY TO INSTALL: Welding required for installation, better remove the black powder coat on the mounting plate before welding.
  • GREAT FOR: Heavy duty swing gate, trailer ramp/ trailer gate, can hold up the gate well and prevent the gate from sagging.
Check Stock

1 Pair Heavy Duty Barrel Gate Hinge 5 inches, Door Hinge Barrel Style for Swing Gate, Trailer Ramp Gate 450lb Capacity - Weld On Install

  • MATERIAL: The door hinge made of cold rolled steel, strong and corrosion-resistant.
  • SIZE: Total length is 5 inches, barrel diameter is 1.2 inch and pin diameter is 1 inches, mounting plate gap is 1.2 inches.
  • each gate hinge can easily hold up to 450 lbs.
  • Matte black coating and durable thick steel material giving it a longer service life and anti- rust features..
  • EASY TO INSTALL: Welding required for installation, better remove the black powder coat on the mounting plate before welding.
  • GREAT FOR: Heavy duty swing gate, trailer ramp/ trailer gate, can hold up the gate well and prevent the gate from sagging.
Check Stock

GateBuddy spike is a Powerful Magnetic Garden Gate Holder which Works with All latches,self-Closing Hinges, gate Kits and Fence Materials. Black Finish, 18 inches. Strike Plate Attached to Base.

  • Keeps your garden gate or shed door open instead of an unsightly prop like bricks, rocks, bungee cords, logs and gnomes..
  • Allows hands free access through your gate when moving yard equipment, food trays, leaves, brush, pool equipment, bikes, etc..
  • Works with all gate and shed door material(Strike plate included for non-metallic gates which is attached to base). Looks great with most gate hardware..
  • Easy to install and re position. 100% percent Recycled HDPE plastic. Great gardening gift..
  • Powerful 30 pound hold rare earth magnet and metal plate(for non metallic applications) ensure easy hold AND easy release. Reference listing picture to see where strike plate is located for shipping..
Check Stock

Baby Gate Extender Wall Protector - Pressure Mounted Gates Extension Kit Extends 1.1-3.5 inches Child Safety Gates and Protect Walls & Doorways from Pet & Dog Gates - Work on Stairs (White)

  • Multi-Functional: Vmaisi gates extender have extra 1.1 - 3.5 inch to keep the gate tight to the wall. Rubber on the extender also keeps it secure to the wall so it doesn't slide forward when pushed. Also doesn't scratch the wall. Keeping your kids secure..
  • EXTEND 3 SIZE WIDE: This new design wall protector extends baby gate 1.1 , 2.3 and 3.5 inches. You can choice only install wall protector or with extender together. Adds 1.1-3.5 inches in length to your baby or pet gates..
  • STABILIZES GATES: The rubber backing also helps create traction against the wall, It worked perfectly and really made the gates stable. Stop gates slip, slide and fall down. This is helpful so a child doesn't push the gate over and injure themselves..
  • KEEP WALLS DAMAGE-FREE: The extra distance from the wall also eliminated your need for a gate extension, making it even more secure. The wide rubber base provides the proper tension without any more damage to your walls..
  • Baby Gate Extension: These extensions parts allowed me to minimize the exposed threaded rods which helped stabilize gate. The rectangle shape Gives it great stability. It fits nicely along the ground as well for stair gate..
Check Stock

Commercial Sliding Gate Opener Eagle-2000 FR 1/2 Horse Power Motorize Slide Gate Operator for Large 45’ feet Gates or 1000lbs Weight Capacity with 2 Wireless Remotes, 1 Receiver, and Photo Eye.

  • The Eagle-2000FR- 1/2 Motorized Slide Gate Operator is designed for Commercial Large Gates up to 45’ feet and 1000lbs weight capacity. Build with a Heavy Duty idler wheels making the opener quiet and smooth when operated..
  • Package Kit Includes – Eagle-2000FR Slide Gate Motor Operator, 2 Wireless Visor Transmitters Remotes, 1 Long Range Receiver, (2) 10ft Nickle Plated Chain, and 1 Reflective Photo Eye. We also provide a 5-Year Limited Manufacturing Warranty..
  • Easy to Install – The Industrial Gate Opener is designed with The Eagle Diamond Board the most advanced and user friendly control board in the market. The Gate Systems control board is equipped with features like Anti Tailgating, Partial Open and Auto Close Timers..
  • Safety – Built with a Foot Pedal Release Mechanism. In case of an emergency or a power outage the foot pedal provides the Sliding Gate Operator to be operable manually by simply pushing the gate open. It also Includes a lighting and surge protection built in..
  • Hardware – The Sliding Gate Operator System has a 1/2 Heavy Duty Horse Power Motor making it ideal for heavy vehicle traffic properties. Additionally, it is built with an Open/close delay and Motor brake disengaging chain mechanism..
Check Stock

KHK SUMA2-25, 2, 25 Tooth, Finished Bore Stainless Miter Gears

  • INSTALLATION: this gate castor features a universal mounting plate with 4 holes to easily attach to wooden gates or along horizontal or vertical rails of a tubular farm gate.
  • PERFORMANCE: The gate caster wheel has a maximum load capacity of 440lbs and can also withstand exposure to chemicals and solvents.
  • SHOCK ABSORBTION: gate caster wheel Built-in spring-loaded clamp acts as a shock absorber when gate caster is rolling over uneven or rough surfaces.
  • SPRING-LOADED: heavy duty gate fence wheel Allow gates to open and close freely by automatically adjusting height on uneven ground while eliminating gate sag.
  • DURABLE: rubber gate caster wheel is made from nylon and metal material, srtong and durable for long time use.
Check Stock

Magacyo Fence Gate Kit Gate Hardware with Gate Latch - Anti Sag Gate Kit - Updated 90 Degree Right Angle Gate Hinges - Gate Corner Brace Bracket

  • Upgraded Design: The Reinforcement Plate Bracket and Door Shafts instead of gate hinges promise Magacyo anti sag fence gate kit at 90 degree right angle and NEVER-BEND..
  • Kindly Note: Install door shafts must be 2 inch space between the gate frame and the wall.(If needed, please adjust the gate frame widths.)Please refer to installation instruction..
  • No sagging & curving gate: Made of heavy gauge steel with superior powder coating, and strong welding could prevent gate corner brace bracket from sagging, twisting, wearing or tearing..
  • Package Included: Gate brackets come with Self Locking Gate Latch, Gate Door Shafts, Installation Instruction and All Mounting Screws. (No need to purchase gate latch additionally anymore.).
  • Widely Use: Gate frame kit fits to 2x4 post, used to build garden fence, shed door, driveway gate, corral gates, wooden window, barn door, pool door, utility door, deck gate, pool gate and so on..
Check Stock

Waterson Heavy Duty Commercial Fully Adjustable Mortise Self-Closing Gate Hinges 2-Pack – K51MP-450 (SA.SA1)-Black

  • HIGH STRENGTH - The gate hinge is made of high quality steel so that each pair of the hinge can hold up to 400lbs driveways and security gates!.
  • RUST RESISTANT - The black powder coating makes the hinge has a superior rust resistance performance!.
  • EASY TO INSTALL - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall.Minimum distance between post and gate should be 1.5", to accommodate for the welding plate and barrel. The threaded arm allows you to easily adjust the distance between gate and post!.
  • LONG LIFE TIME - Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated. It'll last a long life time in good maintenance!.
  • EXCELLENT SERVICE - Backed by a 12 month Warranty and 7*24 hours Technical Support!.
Check Stock

ALEKO LM102 Photo Cell Wired Infrared Sensor for Gate Openers

  • ALEKO LM102 Wired Infrared Photocell Sensor Gate Opener Eye is an accessory for ALEKO brand gate openers.
  • compatible with both swing and slide gate opener models..
  • Infrared beam will prevent gate from closing when there’s something in the way.
  • Egg shaped design will keep rain and snow out of the photocell.
  • prevents the system from getting confused and opening or closing the gate at the wrong time..
  • Can be used anywhere an infrared beam could be useful: garage doors, alarm systems, etc..
Check Stock

Borg Locks BL3430 Metal Gate Digital Lock

  • No power needed – Mechanical keypads for a quick and easy install.
  • Secure – Latchbolt projects up to 20mm into the gate post which increases security and gives more tolerance.
  • Long lasting – Brass bearing plate supports the latchbolt reducing wear and increasing product life.
  • Auto-latching – close the gate and the latchbolt latches into the gate frame. To open the gate – enter the code and turn the handle..
Check Stock

Marks W3700 Single Cylinder Swinging Gate Lock Reversible

  • No power needed – Mechanical keypads for a quick and easy install.
  • Secure – Latchbolt projects up to 20mm into the gate post which increases security and gives more tolerance.
  • Long lasting – Brass bearing plate supports the latchbolt reducing wear and increasing product life.
  • Auto-latching – close the gate and the latchbolt latches into the gate frame. To open the gate – enter the code and turn the handle..
Check Stock

Home Slide Gate Opener Eagle 1000 FSC 1/2 HP Sliding Gate Motor Operator System Residential and Light Commercial for 27’ feet 600lbs Rolling Gates with Wireless Remotes

  • The Eagle-1000-FSC-1/2 Horsepower Slide Gate Operator is design for residential homes or for a business that utilizes smaller gates up to 27’ feet or 600lbs.
  • Package – The Eagle-FSC-1/2 HP Home Slide Gate Operator includes 2 Wireless Remotes, 1 Receiver, and 1 Retro-Reflective Sensor. We also provide our customer with a 5-year limited manufacture warranty ( Residential Only).
  • Hardware – Built with a .5 continues horsepower AC motor, Idler wheels for quiet and smooth operations..
  • Safety – Incase of emergency or power outage the 1000-FSC is built with a Fail Secure Crank to Open. This provide the user to open the gate manually with the use of a crank..
  • Easy to Install – The Eagle Model 1000-FSC- 1/2 HP AC Motor Gate Opener was design for easy installation. It’s equipped with a non-weld chain kit and pre-wired 8-selector switch..
Check Stock