Top Slide Kit

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

SMARTSMITH 4 FT- 12 FT Bypass Barn Door Hardware Kit, Single Track, Space Saving Double Wooden Doors Use, Low Ceiling Flat Track Roller (6ft Single Track Bypass)

  • ...【NOTICE-OVERLAP】A track hang 2 door panels, the roller diameter is 2-1/2'', so the door will be have 8''-12'' distance overlap when full expands (Varied by the hangers installed location), so please be reminded that your door panels should be wider than your opening. If not, The 2 rollers will hit when one door slide, then drive other door slide..
  • 【HEAVY DUTY CONSTRUCTION】Solid steel, fine black powder coated surface,anti-corrosion ensures years of beauty and longevity. -Multiple electrostatic powder spraying process）, high quality carbon steel (High Standard Q235)- 8.8 grade self-tapping screws and roller screws ensure our hardware kit can hold two 220lbs doors. -Over 15000 times test, bearing rollers slide like butter,slide quiet and smoothly..
  • 【EXPERTLY PACKAGED】1 x 6ft Rail, 5 x Rail Support, 4 x Rollers, 2x Door Stops, 2 x Floor Guides, 1 x Installation Manual. -DOOR WEIGHT CAPACITY: 220lb.
  • door panel thickness: 1 3/8" and 1 3/4".(DOORS NOT INCLUDED).
  • 【 PROMOTION PRICE AND 24 HOURS HASSLE FREE SERVICE】With almost half of the market price, you can get the premium quality products from us! If any issue you encountered, please don’t hesitate to contact us, SMARTSMITH Customer support are always 24 hrs online standby to help!.
Check Stock

Fuel Injector Return Line Kit - Fittings + Hose for VW Audi TDI 2.0L Diesel

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

Insputer Pull Out Trash Can Under Cabinet, Under Sink Trash Can with Door Mounting Kit, Heavy Duty Slide Out Garbage Can Shelf for Kitchen Sink Pantry, Waste Bin Not Included

  • High-quality material: Insputer under the sink trash can slide rack is made of high-quality carbon steel with a galvanized surface for durability and rust resistance, allowing you to clean it with a cloth. Note: Without Trash Can, Without Cabinet..
  • Thickened slide rail and ball: The pull out trash can slide rail frame adopts thickened slide rail and solid ball system, which enhances the bearing capacity. The maximum bearing capacity can reach 65 pounds, making the garbage can sliding in and out smoothly. The minimalist streamlined design fits most cabinets..
  • Organize your kitchen: The cabinet trash can pull out kit maximizes space and efficiency in your kitchen. It's a great setup for hiding your recycling and trash and keeping your home neat and clean..
  • Cabinet Requirements: Slide Out Trash Can Rack Dimensions: 12"W x 16"D x 16"H.
  • Minimum Cabinet Dimensions Required:14"Wx 18"Dx 18"H. Note: The height of the under-sink garbage can sliding rail frame of the cabinet door needs to be measured according to the height of the buyer's trash can..
  • Easy to install: The under cabinet trash can pull-out has clear instructions, is supplied with a door mounting kit and other mounting accessories, enables easy installation and you can pullout trash can like a drawer!.
Check Stock

1987-2007 Kawasaki Ninja 250 EX250 EX250J EX250R Carburetor Carb Stage 1-7 Jet Kit

  • Increased Performance at all RPM’s, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines..
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please EMAIL US FIRST through Amazon with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit..
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required..
  • Kit Includes: Main Jets, Pilot Jets, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos..
Check Stock

BOUNTECH Inflatable Water Slide, Water Bounce House with Waterslide & Ball Pit Wet Dry Combo for Kids Backyard Party Fun with Splash Pool, Blow up Water Slides Inflatables for Boys Girls Outdoor Gifts

  • 【Best Gift to Stimulate Kids' Potential】 The 8 in 1 giant inflatable water slide bounce house comes with a variety of entertainment area consisting of long slide with surfing game, large slplash pool, water cannon, tunnel, ocean ball pit and climbing wall that is committed to providing more fun for your kids. Let them share endless happiness with their friends as they race, climb, run, jump, and slide. Product Dimensions:19.5 ft(L) x 10.5 ft(W) x 8 ft(H).
  • 【Premium & Extra Thick Oxford Cloth】 Our inflatable water slides is made of heavy-duty puncture proof and wear resistant 840D + 420D extra thick PVC-coated Oxford cloth materials. Combined with double reinforce sewing techniques, this water slides is durable to accompany your children for long time. Thanks to its premium materials, it can bear weight of 300 lbs (Suggestion: every kid's weight should be under 100 lbs). ASTM Certificated..
  • 【Wet & Dry Home Playground】 This large exciting water slides bounce house integrates multiple functions and entertainment for outdoor summer family fun! Just connect the hose it can be used as a water park. Sliding down the slide the sprayers on the to....
Check Stock

Mikuni Small Round Type Main Jets for BS Series CV Carburetor 145 4 Pack

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines..
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please EMAIL US FIRST through Amazon with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit..
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required..
  • Kit Includes: Main Jets, Pilot Jets, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos..
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund..
Check Stock

Rotary 14845 Comfort Ride Mower Seat with Armrests

  • The ROP Shop replacement Seat Suspension Kit.
  • Specs - Mechanical Suspension. Suspension Stroke: 4". Slide Track Fore & Aft Travel: 6" center to center & 6.75" rail to rail. Weight Adjustment from 110lbs - 330lbs. Refer to images 2 & 3 for more information.
  • comes as shown in the first image (does NOT come with instructions or hardware).
  • This item is a universal suspension kit meant for flat mounting surfaces, but some units and models fabrication may be required for mounting on your machine, however we are unable to verify what applications would need fabrication. The fourth picture shows a schematic of the bolt pattern for mounting to the frame.
  • Long Lever (Black) is for the slide track. Handle Lever (Gray), in the middle, is for adjusting the weight. Star Shaped Knob (Gray) is to adjust the suspension up or down.
Check Stock

Prime-Line R 7210 Drawer Slide Kit – Replace Drawer Track Hardware – Self-Closing Design –Fits Most Bottom/ Side-Mounted Drawer Systems –15-3/4” Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

  • INSTALL OR REPLACe DRAWER TRACK HARDWARE – Whether you are installing new drawers or repairing one that won’t open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers..
  • SELF-CLOSING DESIGN – The smooth-gliding tracks in the Prime-Line R 7210 kit features a self-closing design that commences at the final 2-1/2” from the end of the 15-3/4” long tracks when closing..
  • EASY TO INSTALL – Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website..
  • 75 LBS MAX LOAD CAPACITY – The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 16” deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks..
  • INSTALLATION TIP – The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top..
  • A Phillips head screwdriver is required ....
Check Stock

YOOHE Auto Body Paintless Dent Removal Kit - Car Dent Puller Kit with Slide Hammer T-bar Dent Puller and Bridge Dent Puller for Car Dent Repair and Metal Surface Dent Removal

  • HIGH QUALITY - The car dent puller kit include a slide hammer T-bar dent puller and a silver dent puller. These dent puller made from high quality....
  • PRO 2 in 1 SLIDE HAMMER - Long T-bar dent puller tool is a labor-saving pulling mode via slide hammer hit to repair dents of all sizes with perfect....
  • WIDELY USE - Most pro & comprehensive paintless dent removal tools kit, totally has 43 pcs, including all the classic and popular dent puller tools.....
  • SO EASY TO OPERATE - Our dent puller kit coming with detailed repair steps introduction for operate, it make the dent removal process so easy. so it....
  • TECHNICAL SUPPORT - You will enjoy professional service center, 30-day full amount refunding, quality warranty and technical support. All products....
Check Stock

Prime-Line R 7212 Drawer Slide Kit – Replace Drawer Track Hardware – Self-Closing Design –Fits Most Bottom/ Side-Mounted Drawer Systems –19-3/4” Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

  • INSTALL OR REPLACe DRAWER TRACK HARDWARE – Whether you are installing new drawers or repairing one that won’t open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers..
  • SELF-CLOSING DESIGN – The smooth-gliding tracks in the Prime-Line R 7212 kit features a self-closing design that commences at the final 2-1/2” from the end of the 19-3/4” long tracks when closing..
  • EASY TO INSTALL – Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website..
  • 75 LBS MAX LOAD CAPACITY – The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 20” deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks..
  • INSTALLATION TIP – The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top..
  • For all dimensional information please r....
Check Stock

Prime-Line R 7210 Drawer Slide Kit – Replace Drawer Track Hardware – Self-Closing Design –Fits Most Bottom/ Side-Mounted Drawer Systems –15-3/4” Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

  • INSTALL OR REPLACe DRAWER TRACK HARDWARE – Whether you are installing new drawers or repairing one that won’t open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers..
  • SELF-CLOSING DESIGN – The smooth-gliding tracks in the Prime-Line R 7210 kit features a self-closing design that commences at the final 2-1/2” from the end of the 15-3/4” long tracks when closing..
  • EASY TO INSTALL – Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website..
  • 75 LBS MAX LOAD CAPACITY – The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 16” deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks..
  • INSTALLATION TIP – The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top..
  • For all dimensional information please r....
Check Stock