Top Sliding Bevel Gauge

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Makita 5007F Circular Saw

  • Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and jobsite durability.
  • Lower guard design improves performance when making bevel and narrow cuts.
  • Large cutting capacity (2-3/8″” at 90°, 1-3/4″” at 45°).
  • Two built-in L.E.D. lights illuminate the line of cut for increased accuracy.
  • Well balanced design for superior handling and performance.
  • Heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts.
  • Built-in dust blower clears the line of cut for greater accuracy.
  • Technologically-advanced centrifugal fan and baffle system for efficient cooling of the motor.
  • Bevel cuts 0-45° for the most common angles.
  • Large and easy-to-read markings on depth and bevel scales.
  • Flat motor housing design increases stability when changing blades.
  • Conveniently located shaft lock for easy blade replacement.
  • AC/DC switch allows for use with alternative power sources.
  • All-ball bearing construction engineered for longer tool life.
  • Ideal for framers, builders, masons and siding contractors.
  • Powerful 15.0-AMP motor delivers 5,800 RPM for proven performance and jobsite durability.
  • Large cutting capacity (2-3/8-Inch at 90-Degree, 1-3/4-Inch ....
Check Stock

DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw (Discontinued)

  • Includes: a carbide blade, dust bag, blade wrench and comfortable side handles in the base.
  • Miter detent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • Adjustable stainless steel miter detent plate with 11 positive stops.
  • Tall sliding fences that support crown moulding up to 5-1/4-Inch. nested and base moulding up to 6-1/2-Inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • Crosscut capacity up to 2×8-Inch dimensional lumber.
  • Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown moulding laying flat.
  • 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles.
  • Cam lock miter handle with miter detent override that eliminates the need to twist the handle to lock in on the angle.
Check Stock

Saw, Miter - 10 Electric Miter Saw: Single Cut, Saws - Power

  • MOTOR: 12 amp motor for professional power.
  • BEVEL: 0-45 degree bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place.
  • MITER: 57 degree miter angle to the right, for ultra flexibility with 45 Degree miter angle to the left.
  • MITER SCALE: White on black miter scale for superior accuracy and visibility.
  • SLIDE SYSTEM: Linear ball bearing slide system.
  • POSITIVE STOPS: Positive stops on miter and bevel scale, for easy to read measurements and quick settings.
  • METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
Check Stock

Metabo HPT MultiVolt 36V Sliding Miter Saw 10-Inch Blade Dual Bevel Includes Battery & Charger C3610DRAQA

  • MULTIVOLT: Miter saw can be powered by a MultiVolt 36 Volt battery (included) or the MultiVolt AC adapter(sold separately).
  • FEATURING: Dual bevel sliding miter saw providing the power and precision a pro demands.
  • INCLUDES: 36 volt miter saw, 4 AH battery and charger.
  • AWARD: Rated Best 10-Inch Miter Saw by Pro Tool Reviews 2020.
  • MITER AND BEVEL: Miter and bevel: 0-60 degree miter angle to the right and 0-55 degree miter angle to the left and also 0-48 degree bevel angle range....
Check Stock

Milwaukee M18 18-Volt FUEL Lithium-Ion Cordless Brushless 10 in. Dual Bevel Sliding Compound Miter Saw Kit

  • Milwaukee POWERSTATE Brushless Motor provides more power, more run-time, and longer life. The Milwaukee REDLITHIUM Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life..
  • REDLINK PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity..
  • 5-3/4" Vertical Capacity (Base Board Against the Fence), 2x12 Horizontal Capacity (Laying Flat at 90°),5-1/4" Vertical Capacity Nested Crown Cam Locking Miter System with Adjustable Stainless Steel Miter Detent Plate and 11 detent locations, Dual Bevel with 9 detents and easy access bevel lever, Shadow Cut Line Indicator for quickly lining up cuts..
  • Top and Side Carrying handles for maximum portability Detent Override for Easily Setting Miter Locations Outside of Detents Up to 400 Cuts per Charge Tall Sliding / Removable Fences to Support Large Base and Crown Against The Fence, Easy Access Blade Change.
  • What's Included (1) M18 FUEL Dual Bevel Sliding Compound Miter Saw (2734-20), (2) M18 REDLITHIUM HIGH DEMAND 9.0 Battery Pack (48-11-1890), (1) M18 & M12 Rapid Charger (48-59-1808), (1) Blade Wrench, (1) Carbide Tipped Blade, (1) Clamp, (1) Dust Bag.
Check Stock

Metabo HPT 10-Inch Sliding Compound Miter Saw Double-Bevel Electronic Speed Control 12 Amp Motor Electric Brake 5-Year Warranty C10FSBS

  • MOTOR: 12 amp motor for professional power.
  • BEVEL: 0-45 degree bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place.
  • MITER: 57 degree miter angle to the right, for ultra flexibility with 45 Degree miter angle to the left.
  • MITER SCALE: White on black miter scale for superior accuracy and visibility.
Check Stock

Sew Tech Premium 5in1 Sliding Sewing Gauge Ruler with Hem Gauge, Seam Gauge, Buttonhole Guage and Circle Function for Accurate Sewing Quilting Measuring and Marking, with a Sewing Seam Ripper

  • 5 Functions in 1 Gauge - Sew Tech sliding sewing gauge is adjustable and super functional, can be used as hem gauge, seam allowance gauge, buttonholes gauge, "T" gauge, and circle compass.
  • Upgraded Locking System - Sew Tech sewing gauge ruler’s sliding part always lock in place securly and keep your desired measurement through our improved locking system, helping to prevent accidental movement of the sliding part and wrong measurement.
  • Accurate Measurements - Sew Tech sliding guage ruler features a clear scale, allowing you to mark even lines easily. The 1/8’, 1/4’, 5/8’ marked in black lines at the end of the sewing rulers helps you to measure and mark precisely.
  • Premium Quality - Sew Tech measuring gauge is made of selected high-quaility plastic, durable and capable for a long time use.
  • An Extra Sewing Seam Ripper Included - Sew Tech sliding gauge is a versatile tool suitable for sewing, quilting, waving, measuring, stitch work. It is a perfect gift set that comes with a sewing seam ripper for your family and friends who love sewing, card-making, paper artworks, or DIY crafts.
Check Stock

Angle Gauge eOUTIL Digital Protractor Inclinometer Angle Finder Magnetic Base - Precision Level Box for Automobile Woodworking Building Drilling Machinery Masonry Yellow

  • Audio Indicator---This digital angle gauge and level have switchable acoustic signal function. Acoustic signal routing via beeps when you reached 0°....
  • Ultra-HD LCD Display & Inverted Measurements---This digital level sports a high visibility bright screen with large digits. High Visibility LCD....
  • HOLD & ZERO Function---Using the HOLD function, readings can be “frozen” on the display and the ZERO function makes it possible to apply zero....
  • Strong Stable Magnetized Base---The bevel gauge with V-Groove strong magnetized base. You can easily mount this tool against the metallic surfaces,....
  • 4 Unit of Measurement---The electronic inclinometer also offers bevel and angle readings in pitch inch/feet, degrees, millimeter/meter, and percent....
Check Stock

General Tools 29 Plastic Protractor and Angle Finder, Outside, Inside, Sloped Angles, 0° to 180° , Yellow

  • The digital level is more precise and often easier to use than old-school models with bubble vials.2.2” digital level's versatility and accuracy make it a must-have tool..
  • Strong Stable Magnetized Base---The bevel gauge with V-Groove strong magnetized base allowing you attach the cube directly to any ferrous metal surface, even a curved surface..
  • Easy to Read---Digital level has upgraded LCD screen, the measured values displayed are clearer and brighter, even in the dark does not affect reading..
  • Two Measurement Modes---Absolute angle mode and relative measurement mode, press the "ZERO" button to achieve relative/absolute measurement interchange at any position, could not be easier.This sturdy mini tool also functions as an inclinometer, protractor, and a level and bevel gauge..
  • Portable & Lightweight---eOUTIL digital inclinometer has portable size, it's convenient to carry and co-work with other measuring tools and enlarge measuring range. It is compact and very much affordable..
Check Stock

GENERAL INTERNATIONAL 7-1/4" Compound Sliding Miter Saw - 10A Dual Slide Rail Chop Saw with 0-45° Bevel & Laser Alignment System - MS3002

  • 7.25 INCH COMPOUND MITER SAW - This powerful yet compact saw features a 7.25" carbide tooth blade for fast, easy cross-cutting of dimensional lumber as large as 2x8.
  • POWERFUL 10 AMP MOTOR - Powered by a robust 10 amp motor this miter saw has a max no load speed of 5000 RPM and is capable of cutting through some of the toughest job site materials..
  • BEVELS FROM 0-45 DEGREES - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Ideal for everything from framing to finish work..
  • ACCURATE LASER GUIDED CUTTING - When precision is key to your jobs success, look to the integrated laser alignment system to help you produce fast, accurate cuts ..
  • DUAL RAIL SLIDING SYSTEM - The two rail sliding system enhances rigidity and provides extra capacity when making long crosscuts, miter cuts and bevel cuts..
Check Stock