Top Sliding Bushing

2 pcs Brass Bearing Bushing,Inner diameter10mmx Outer Diameter 14mmx Height 20mm/Side Outer Diameter 22x2mm for Machining Router.

  • ✅ Material:Made of brass material, which is conductive, corrosion resistant, and non-magnetic..
  • ✅ Features: Bearing copper bushing Oil impregnation enables sliding velocity and makes them suitable for rotating applications..
  • ✅Most suitable for applications with rotating movements and where self-lubricating properties of the material are a prerequisit..
  • ✅ Versatile: Ideal for Used in micro motor, household appliances, electric tools..
  • ✅If you have any questions about the product, please feel free to contact us, and we will do our best to help you..
Check Stock

Door Pin Guides Hinge Liners and Door Bushing Removal Tool Kits (8 Door Pin Guides) 17Pcs For 2007-2020 Jeep Wrangler JK JKU JL JLU

  • DURABLE MATERIA:The Door Bushing Removal Tool was constructed with strong iron.Advanced CNC machined aircraft grade stainless steel structure guides and durable ABS plastic integral molding process bushings, anti-corrosion and never rust..
  • FITMENT:Fit for Jeep Wrangler JK, JKU, JL, JLU, Sports, Sahara, Freedom, Rubicon, Unlimited 2007-2020. (Door Bushing Removal Tool did not fit TJ).
  • WIDELY USEFUL:These door pin guides help you line up your door pins and put your doors back easily.The door bushing removal tool helps to remove your Jeep corrosive hinges.By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally removed..
  • QUANTITY INCLUDED:8*Door Pin Guides,8*Door Hinge Liners,1*Door Bushing Removal Tool..
  • 100% SATISFACTION:If you are not satisfied with our kit,please contact us,we will try our best to solve your problem..
Check Stock

OTC (6913 Extension Housing Bushing Remover for Ford Ranger

  • Removes transmission extension housing bushing.
  • Inserts through the bushing and the drive screw and is tightened to draw the bushing out of the housing.
  • Applications apply to Ford Ranger transmissions.
Check Stock

Long and Short Polyurethane Bushing Replacement for Polaris Sportsman 335 400 400L 450 500 570 800 1996-2018 Replace # 5436973 5439270 - Control Arm Bushing Kit

  • 【FIT THE FOLLOWING MODELS】-- Compatible with 1998-2000 Polaris Sportsman 335 | 1996-2014 Polaris Sportsman 400 | 2006-2018 Polaris Sportsman 450 | 1996-2013 Polaris Sportsman 500 | 2014-2018 Polaris Sportsman 570 | 2005-2014 Polaris Sportsman 800..
  • 【HARD CONTROL BUSHING】-- With construction of heavy duty material, it can withdraw a lot of press without bending..
  • 【POWERFUL FUNCTION】-- The control bushing mainly mounts on car suspension and steering joints to absorb road bumps, control the amount of movement in the joints and reduce noise and vibration;While it is NOT a genuine a arm bushing part, it is an ideal replacement designed to fit or work like the factory part..
  • 【QUALITY ASSURANCE】-- Our bushings are high quality polyurethane bushings. This material is stronger than original ones. And it also lasts longer than the ones made of rubber. Thus, it is not easy to get broken or bent and you can use it for a long time to save your pocket money..
  • 【BUY WITH CONFIDENCE】-- Order from Skyee-blue for a true worry-free shopping experience. The bushing comes with one year warranty. If the a arm bushing ever fails on your Polaris, just feel free to contact us for a replacement..
Check Stock

2 pcs Brass Bearing Bushing,Inner diameter4mmx Outer Diameter 8mmx Height 6mm/Side Outer Diameter 12x2mm for Machining Router.

  • ✅ Material:Made of brass material, which is conductive, corrosion resistant, and non-magnetic..
  • ✅ Features: Bearing copper bushing Oil impregnation enables sliding velocity and makes them suitable for rotating applications..
  • ✅Most suitable for applications with rotating movements and where self-lubricating properties of the material are a prerequisit..
  • ✅ Versatile: Ideal for Used in micro motor, household appliances, electric tools..
  • ✅If you have any questions about the product, please feel free to contact us, and we will do our best to help you..
Check Stock

Aicosineg Oilless Bushings 6mm Bore x 8mm OD x 8mm Length Plain Bearings Wrapped Carbon Steel Base 0608 Sleeve Bearing 10pcs

  • 【DIMENSIONS】- Bore:6mm/0.24inch, Outside diameter:8mm/0.31inch, Length:8mm/0.31inch,Dry friction coefficient μ:0.04-0.2 ,Product Number:0608.
  • 【HIGH QUALITY MATERIAL】-Carbon steel base with Bronze Sintered and composite coating.
  • It offers good frictional property, wear resistance and low noise.
  • 【FEATURE】- Oilless, maintenance-free, good frictional property.
  • 【ADVANTAGE】-Featured with good load capacity and wear resistance performance.
  • Solid friction Oilless Bushing can operating during wide temperature rang, Suitable for applications with sliding movements.
  • 【APPLICATION】-Wide application such as bolt ,textile machine, printing machine, hydraulic loader, fitness equipment and agricultural machinery.
Check Stock

BXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 3/4" tool with bushing, 1" diameter without bushing.
Check Stock

OXA #4 Quick Change Heavy Duty Boring Bar Tool Post Holder OXA 250-004

  • For use with OXA tool post 250-000. 6-8" swing.
  • Holds 3/8" with bushing (1/2" diameter without bushing).
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter.
Check Stock

O'SKOOL Self Centering Dowel Jig Kit Drilling Guide Bushings Set Wood Wide Capacity Doweling Jig Puncher Locator Joints Tool

  • Guide hole sizes are 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. Package induldes: Dowel jig x1.
  • Our jig is patented and easy to adjust ,and can be clamped on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling and wood board joints, it is an ideal tool for panel furniture..
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • The drilling bushing is made of high-quality materials, with high strength and accurate positioning. When using a hand held drilling machinel, the countersunk drill bushing allows the drill bit to slide into the hole easily, ensuring the correct angle of the drill bit..
  • There are 4 holes along the top of the jig, only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits..
Check Stock

New 2 PK! King KUTTER AFTERMARKET Finish Mower Assembly-with Needle Bearings

  • HUB WIDTH = 3.5" from bushing end to bushing end.
  • YOKE DIA: 1" - YOKE LENGTH: 8", free play 7 1/2".
  • YOKE SPACERS: 1 (each) 1-1/2" spacer, 1" spacer & 1/2" spacer.
Check Stock

Ajax Tools Pneumatic Brake Pin & Bushing Driver Kit (AJX-A1166)

  • Includes One Mercedes Benz Bushing Remover/Installer.
  • Designed to Remove and Replace Metallic Bushings on Mercedes Rear Axles.
  • Services Almost All Mercedes Passenger Cars from 1984 and Up.
  • Features a Pressure Piece that Provides Correct Position of Replacement Bushing.
  • Includes a Cut-Out In Cap to Allow Sighting of Bushing Position.
Check Stock

AXA #4 QUICK CHANGE HEAVY DUTY BORING BAR CNC TOOL POST HOLDER 250-104

  • For use with AXA tool post 250-100 or 250-111. up to 12" swing..
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 5/8" tool with bushing, 3/4" diameter without bushing.
Check Stock