Top Slitting Machine cutting Machine

Double Sided Mounting Tape 4' x 8' 3pcs 3M VHB 5608 Square Pad Strong Adhesive Heavy Duty Waterproof Foam Tape Gray Color for Car Home Office Decor(5608F)

  • FEATURE: Adds dimensional stability to foams and other substrates and also makes it easier to handle the tape during slitting and die-cutting. High bonding strength to LSE plastics. The bond strength of 3M? Laminating Adhesive 5608 increases as a function of time and temperature, and has very high initial adhesion. The acrylic adhesive also provides excellent adhesion to surfaces contaminated lightly with oil typically used with machine parts..
  • HIGH QUALITY: ① Excellent seal tightness, ② Excellent shockproof and transformation resistance. ③ Non-toxic and environmental. ④ High tempreature resistance and waterproof.and durable.⑤ Strong adhesive and easy to removal. ⑥ Powerful ability to bond a variety of surfaces..
  • RECOMMENDED: Recommended applications for: Foam to powder coated painted surfaces. Logo bonding. Touchpad bracket assembly. Camera module assembly. Electronic component bonding. Module bonding to PET card. Touch panel bonding. Rubber feet bonding. Low surface energy bonding. Car decoration bonding. Kitchen and bathroom accessories bonding. Cell phone holder adhesive..
  • INSTALLATION AND REMOVEAL: After application, the bond strength will increase as the adhesive flows onto the surface. At room temperature, approximately 50% of the ult....
Check Stock

YJYGR 8pcs M3 PA20 Inside Bore Diameter 22mm #1-8 HSS Involute Gear Milling Cutter Metal Cutting Circular Saw Blades

  • Diameter: 2 - Width of Face: 1/32 - Number of Teeth: 38 - Hole Size: 1/2.
  • Regularly furnished with 5-7 clearance for general purpose slitting.
Check Stock

F&D Tool Company 14728 Plain Slitting Saw, High Speed Steel, 4 1/2\ Diameter, 1/16\ Width of Face, 36 Teeth, 1\ Hole Size

  • Diameter: 4 1/2 - Width of Face: 1/16 - Number of Teeth: 36 - Hole Size: 1.
  • Regularly furnished with 5-7 clearance for general purpose slitting.
Check Stock

Grobet USA Swiss Pattern File Pillar Extra Narrow 6 Inch Cut 4

  • The 4" (10 cm), 5-1/2" (14 cm) and 6-1/4" (16 cm) sets consist of one each barrette, crossing, equalling, half-round, joint round edge. knife, marking, round, slitting, square, three-square, and warding. The 7-3/4" (20 cm) sets consists of two each half-round, round and three-square and one each barrette, crossing, equalling, knife, square and warding. Cut portions are 4" files are 1-3/4.
Check Stock

Diamond Cutting Abrasive Wheel Cut Off Discs 10pcs with 2pcs Mandrel for Dremel Rotary Tools (30mm)

  • ...rs, electric grinders, etc. They can be used for cutting metal, plastic, chassis modification, thin metal circuit board, and DIY production after connecting with mandrels..
  • 【Great DIY Tool】Suitable for most power die grinders or rotary tools and pneumatic tools. The cutting wheel set for rotary tool is ideal for slitting and trimming metal, wood, plastic, glass, aluminum alloy, gem, jade processing, and more. They are great tools and perfect gifts for DIY lovers..
  • 【Premium Service】Weicher is committed to providing customers with 100% satisfactory products and shopping experience. If you have any questions, please feel free to contact us, our professional team will serve you within 24 hours..
Check Stock

Cricut Variety Pack(1 StrongGrip, 1 LightGrip, 1 StandardGrip) Adhesive Cutting Mat 12

  • Works with the Cricut explore machine, Cricut expression machine, and Cricut expression 2 machine.
  • One 12" x 12" standard grip adhesive cutting mat, one 12" x 12" light grip adhesive cutting mat, and one 12" x 12" strong grip adhesive cutting mat.
  • Recommended materials for standard grip adhesive cutting mat: cardstock, pattern paper, embossed cardstock, iron-on, and vinyl.
  • Recommended materials for light grip adhesive cutting mat: printer paper, thin cardstock, vellum, construction paper, and vinyl.
  • Works with the Cricut Explore machine, Cricut Expression machine, and Cricut Expression 2 machine.
  • One 12" x 12" StandardGrip adhesive cutting mat, one 12" x 12" LightGrip adhesive cutting mat, and one 12" x 12" StrongGrip adhesive cutting mat.
  • Recommended materials for StandardGrip adhesive cutting mat: Cardstock, Pattern paper, Embossed cardstock, Iron-on, and Vinyl.
  • Recommended materials for LightGrip adhesive cutting mat: Printer paper, Thin cardstock, Vellum, Construction paper, and Vinyl.
  • Recommended materials for StrongGrip adhesive cutting mat: Thick cardstock, Glitter cardstock, Magnet material, chipboard, Poster board, and Fabric with stiffenerDescriptionCRICUT CUTTING MAT 12X12 VARITY 3 PACK.
Check Stock

28mm Dia 60-Degree Silver HSS Double-edged Dovetail Tool Metalworking End Mill 12 Flutes

  • HSS material, durable and long service life..
  • Blade diameter: 30mm/1.18" , Shank Diameter: 16mm/0.63".
  • Safety instructions: Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed. The bladed product is not use for people under 18 years. The item is only use for industrial slitting/engraving, not hazardous article..
  • It is double-edged with regualr distribution,10 flutes making the the slitting stable..
  • It fits for meatalworking mold steel, cast iron, carbon steel, alloy steel, tool steel, general iron material..
Check Stock

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

F&D Tool Company 14841-B436 Slitting Saw with Side Chip Clearance, High Speed Steel, 4\ Diameter, 1/16\ Width of Face, 1\ Hole Size

  • Slitting Saws With Side Chip Clearance - High Speed Steel.
  • Diameter: 4 - Face Width: 1/16 - Hole Size: 1.
  • For wider cuts it's reccomended to use a staggered tooth saw.
Check Stock

General Tools 707475 Swiss Pattern Needle File Set 12-Piece Black Set of 12 and Handle

  • 12-piece set of general-purpose needle files.
  • perfect for toolmakers, jewelers, craftspeople and hobbyists.
  • High-quality chromium alloy steel construction with a #2 Single Cut Swiss pattern.
  • 12 file sizes: warding (flat), round, 3-square, square, crossing, oval, half-round, knife, barrette, slitting, joint-round edge and equaling (mill).
  • Ergonomic handle, with contoured fingertip swivel, allows greater pressure to be applied to blade.
  • Precision locking screw chuck holds files securely in place.
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • ..., the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma cutter with Non-HF Pilot Arc function (Not HF Pilot Arc) Under this function, Pilot arc will not interference to machine( HF Pilot Arc will interference to machine).
  • Suitable Material:This plasma cutter suitable cut 20mm standard mild steel, 16mm stainless steel, 16mm Alloy steel, 4mm copper, 8mm Aluminum. All the cutting thickness....
Check Stock

Jacobson Hat Company White & Pink Bunny Ears Headband with Fluffy Tail

  • FEATURE: Adds dimensional stability to foams and other substrates and also makes it easier to handle the tape during slitting and die-cutting. High....
  • HIGH QUALITY: ① Excellent seal tightness, ② Excellent shockproof and transformation resistance. ③ Non-toxic and environmental. ④ High....
  • RECOMMENDED: Recommended applications for LED strip light. Lens bonding applications. Logo bonding. Touchpad bracket assembly. Camera module assembly.....
  • INSTALLATION AND REMOVABLE: After application, The bond strength of 3M Laminating Adhesive 300LSE increases as a function of time and temperature, and....
  • APPLICATION: This tapes is designed and developed especially for the repair of phone or electronic devices, screen protector, LCD panel display,....
Check Stock