Top Slotted Square Neck Bolt

(10) 3/4-10x2#3 Grade 8 Dome Head Plow Bolts Plain & Oil

  • Price For: Each Finish: Zinc Material: Carbon Steel Head Type: #3 Flat Item: Plow Bolt Head Angle (Deg.): 80 Type: Countersunk Square Neck Grade: 5 Includes: Nut Square Width: 0.450" Head Height: 0.364" Head Dia.: 0.826" Meets/Exceeds: SAE J 429, SAE J 995 Thread Size: 7/16"-14 Tensile Strength (PSI): SAE J 429, SAE J 995 Length: 2" Key Height: -.
  • Key Width: - Country of Origin (subject to change): Multiple.
Check Stock

Dragon Fit Joggers for Women with Pockets,High Waist Workout Yoga Tapered Sweatpants Women's Lounge Pants (Small, Joggers78-Black)

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Carriage Bolt 18-8 Stainless Steel 1/2'-13 x 18' Qty-25

  • A carriage bolt has a domed or countersunk head and the shank is topped by a short square section under the head of the bolt..
  • The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened..
  • Carriage bolts are often used to fasten wood panels or board to masonry or to one another..
  • The square shank of the bolt allows it to lock into place when inserted into a round hole in wood or a square hole in a metal strap, the unthreaded square shank pulls into the wood creating a tight connection..
  • 18-8 Stainless steel is corrosion and rust resistant. 18-8 Stainless steel is considered the fastener industry standard..
Check Stock

5PCS Precision Screwdriver Set, Stainless Steel Material, Small Flat-blade Screwdriver Kit, Mini Phillips Screwdriver for Repair Watch, Toys, Glasses and Electronics

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Triwing Screwdriver for Nintendo Switch Joycon, 1.5 Y Tripoint and Y00 Screwdriver Repair/Replacement Tools for Switch/Switch Lite JoyCon Joy-Con Controller

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Wiha 30290 SoftFinish Grip ScrewDriver Set Slotted 3.0-6.5 Phillips Number 0 -2 and Square Number 1-3 10-Piece Set

  • SoftFinish Slotted, Phillips & Square Screwdriver Set, 10 Piece. Includes Slotted 3.0, 3.5, 4.5, 6.5mm, Phillips #0, #1, #2 & Square #1, #2, #3. Blade....
Check Stock

KML Truck Bed Rack No-Drill Cargo Rack System Compatible with Tacoma 16-21 Pickup Truck 2/3 Gen

  • 【FITMENT】Tacoma 2016 2017 2018 2019 2020 2021 2/3 Gen Tacoma Models (both short bed and long bed Tacoma).
  • 【FUNTIONS】Slotted cross members and side rails accept most accessory mounts. Pre-cut square mounting holes for the following accessories: universal Hight Lift Jacks, RotoPax fuel packs, a spare tire, rooftop tents, recovery traction tracks, etc.
  • 【MATERIAL】The Bed Rack is built from heavy-duty steel to ensure maximum durability against heavy loads. It is coated with a durable black powder coating to ensure lasting protection against corrosion. Rated capacity (evenly distributed): 440 lbs dynamic, 880 lbs static.
  • 【INNOVATIVE DESIGN】Sections and parts are available for different combinations of carrying all kinds of cargos and luggages.
  • 【INSTALLATION 】Fully bolt-on installation. Shipped disassembled, easy to put together, include tire retainer.
Check Stock

OstarYeah Ratcheting Screwdriver Bit Set, Multipurpose S2 Magnetic with Ratchet Handles, 24 PCs 14 Inch Wrench Set-Repair Tool Kits for Household, Laptop, PC, Furniture, DIY Toys, Small, (NewOSD05)

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Power Stop EBR1291XPR Drilled and Slotted Front Brake Rotor Pair

  • Drilled And Slotted performance rotors for maximum cooling.
  • Rotors are zinc plated for maximum protection against rust.
  • Engineered to work together to increase stopping power, improve durability And eliminate dust.
  • Bolt on upgrade for stock brakes, no modifications necessary.
  • The Cross Drilled and slotted rotors temperature remainds 50-180 degrees coller resulting in less fade.
Check Stock

Power Stop EBR1083XPR Drilled and Slotted Front Brake Rotor Pair

  • Drilled And Slotted performance rotors for maximum cooling.
  • Rotors are zinc plated for maximum protection against rust.
  • Engineered to work together to increase stopping power, improve durability And eliminate dust.
  • Bolt on upgrade for stock brakes, no modifications necessary.
  • The Cross Drilled and slotted rotors temperature remainds 50-180 degrees coller resulting in less fade.
Check Stock

Power Stop AR8386XPR Drilled and Slotted Front Brake Rotor Pair

  • Drilled And Slotted performance rotors for maximum cooling.
  • Rotors are zinc plated for maximum protection against rust.
  • Engineered to work together to increase stopping power, improve durability And eliminate dust.
  • Bolt on upgrade for stock brakes, no modifications necessary.
  • The Cross Drilled and slotted rotors temperature remainds 50-180 degrees coller resulting in less fade.
Check Stock

Herco HE826 Precision Screwdriver Set

  • Interchangeable Insulated Screwdriver Set with an insulated handle, 5 interchangeable insulated blades, and a carrying pouch.
  • Screwdriver Set includes tip sizes: two #2 Phillips, two 1/4-Inch Slotted, one #1 Phillips, one #1 Square, one #2 Square, and one 3/16-Inch Slotted.
  • Securely and easily release the blade with a quick twist of the lock collar.
  • Interchangeable blades with a slim-tip to fit tight terminal blocks.
  • Handle and blade have a 1000-Volt insulation rating and meets or exceeds ASTM F1505 standard for insulation.
  • A layer of orange impact and flame resistant insulation protects from electric shock.
  • Cushion-Grip handles for greater torque and comfort.
Check Stock