Top Slow Cure

TotalBoat 5 1 Epoxy Resin Kit Quart Fast Hardener Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair

  • PREMIUM EPOXY KITS include enough 5:1 marine epoxy resin and hardener to complete a variety of boat building, composite construction, and epoxy repair....
  • IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics. Self-leveling properties are ideal for coating and laminating.....
  • CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 minutes @ 75°F for Fast Hardener, to 20 minutes @ 75°F for Slow Hardener. Minimum recommended....
  • CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin,....
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use....
Check Stock

TotalBoat Crystal Clear Epoxy Kits (Gallon)

  • ... IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics. Self-leveling properties are ideal for coating and laminating. Combine with fillers to make a high-strength fairing compound, filleting material, or adhesive.
  • CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 minutes @ 75°F for Fast Hardener, to 20 minutes @ 75°F for Slow Hardener.
  • CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, calibrated pumps, mixing sticks and mixing cups. Compatible with other 5:1 epoxy resin systems.
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin.
Check Stock

Total Boat High Performance Epoxy Resin (Gallon)

  • Part 1 of a two-part, low-viscosity epoxy resin system that’s easy to use for clear coating, laminating, layups, and vacuum bagging. For use with non-blushing TotalBoat 2:1 Slow, Medium, and Fast Hardeners for curing in a wide range of times and temperatures..
  • Non-blushing formula means no time spent removing messy surface blush so projects can be finished faster. Low odor and low VOCs make it great for shop or indoor use..
  • Simple mix ratio of 2 parts resin to 1 part hardener makes it easy to get a proper cure every time, especially using TotalBoat 2:1 Pumps (sold separately)..
  • Use on properly prepared wood, fiberglass, aluminum, and steel. Clear, hard, flexible cure is great for clear coating and wooden boat building. Blend mixed epoxy resin with fillers to create a strong adhesive, fairing compound, or filleting compound..
  • Available in Quart, Gallon, and 4-Gallon sizes..
Check Stock

MAX TCR A/B 1-Gallon Kit ⁂ Epoxy Resin for Floral Arrangements ⁂ Creates Clear Water Simulation for Flower Arrangements ⁂ Long Working Time ⁂ Cures Flexible to Prevent Glass Vase Breakage

  • Water Clear Casting For Floral Arrangements ● Low Viscosity● ● Slow Cure To Reduce Yellowing ● Water Clear ● Silk Flowers Pull Resistant After 24 To 36 Hour Cure.
  • Very Flexible To Allow Expansion And Contraction ● Reduce Glass Vase Breakage.
  • Excellent Adhesion To Containers Or Vases Made From Glass, Ceramic, Clay, Stone Pottery.
  • Working Time: 120 Minutes @ 77°F (25ºC) (500 gram mass).
Check Stock

Versachem 52000 Gasket Shellac - 2 fl. oz.

  • Designed to coat, seal and repair most gaskets.
  • Seals metal gaskets and threaded connections.
Check Stock

Bledie Lekker Beef Biltong Sliced 8oz

  • Real South African style Beef Biltong and Karroo style Droewors made right here in the USA.
  • High in Protein. Excellent snack and trail food. Keto friendly..
  • Slow cure Biltong in the traditional air dried Karroo way..
  • Bundle contains one pack of sliced Biltong (dried beef) and one pack of Droewors (dry sausage).
Check Stock

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

St. Croix Rods Triumph Salmon & Steelhead 2-Piece Casting Rod

  • sea guide atlas performance slim aluminum-oxide guides with black frames.
  • 5-year warranty backed by st. croix superstar service.
  • built for savvy anglers seeking the best in performance and value.
Check Stock

TotalBoat 5:1 Epoxy Resin Kit (Quart, Slow Hardener), Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair

  • PREMIUM EPOXY KITS include enough 5 to 1 marine epoxy resin and hardener to complete a variety of boat building and epoxy repair projects For wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel and lead Not for clear-coating projects.
  • IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics Self-leveling properties ideal for coating and laminating Combine with fillers to make a high-strength, moisture-resistant fairing compound, filleting material or adhesive.
  • CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 min at 75F for Fast Hardener, to 20 minutes at 75F for Slow Hardener Cures to a high-strength, moisture-resistant, light amber plastic solid that can be sanded and shaped.
  • CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, calibrated pumps, mixing sticks and mixing cups. Compatible with other 5:1 epoxy resin systems.
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin.
Check Stock

St. Croix Rods Triumph Spinning Rod

  • PREMIUM SCIII CARBON CONSTRUCTION: The premium SCIII carbon rod combines with the Fortified Resin system (FRS) for unparalleled strength and durability.
  • PREMIUM-GRADE CORK HANDLE: Contoured handle ensures you maintain a strong grip on your fishing rod.
  • MORE FEATURES: Sea Guide Atlas Performance SS304 with black finish guides.
  • Sea Guide XDPS reel seat with sandblasted hoods on spinning models.
Check Stock

Speedokote SS-1200/90 - Ultra High Gloss with Superior DOI 2.1 voc Clear Coat 2 1 Mix 6 quarts Slow Speed clearcoat Kit

  • Universal Durable Clear, Slow Speed, 85+ deg. F.
Check Stock

BSI / Taytools Bob Smith Industries 30 Minute Slow-Cure TM 2 Part Epoxy 4.5 OZ Combineds

  • SLOW-CURE (TM) 30 min. epoxy works best for forming reinforcing fillets on joints..
  • It has the highest strength of BSI epoxies..
  • It is waterproof and more heat resistant..
  • Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours..
Check Stock