Top Slow Spiral Tap Set

Thread Taps Drill, 7Pcs/Set Better Chip Removal Spiral Combination Tap Easy Installation High Speed Steel for Soft Metal(#2)

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
Check Stock

Drilling, Reaming, Tapping and Milling on the Drill Press (DVD)

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Doirdon Slow Feeder Insert Slow Feeder Dog Bowls with 36 Strong Suction Cups for Small Medium Large Size Silicone Dog Bowl Insert Compatible with Regular and Raised Bowls (Yellow Green)

  • SLOWS DOWN EATING UP TO 5-10X: Turn your stainless steel dog bowls or ceramic dog bowls into slow feeder dog bowls with the Slow Feeder Dog Bowls Insert. Made of a food safe silicone material that is BPA, PVC, and phthalate free. Suitable for wet dog food, dry dog food, and dog treats.
  • WIDE APPLICABILITY: Our spiral slow feeder will fit into most sized dog bowls, best for dog bowls with a bottom diameter of 7-5.5"（opening of 8.5-5.5 Inches） and can be cut to fit a minimum of 4.7" dog bowls. Turn your dog bowl or raised dog bowl into a slow feeder dog puzzle and interactive dog toy slow feeder..
  • STRONGEST SUCTION CUP BASE: The 36 small suction cups on the bottom of the Doirdon slow feeder bowl insert hold it firmly in the bottom of the dog bowl without adding water. Bearing 12-15 LB weight. You don't have to worry about your dog will drag it from the bowl..
  • HELPS TO PROMOTE HEALTHY EATING: Slow feeder dog bowls help to slow down the pace of eating which in turn can help aid in proper digestion, choking, and overeating. Flexible and easy to secure to most dog food bowls our spiral slow feeder should be added to your daily dog feeding supplies..
  • EASY USE AND CLEAN: No complicated and variable compartments, so uahpet dog slow feeder allows you to easily ....
Check Stock

Champion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

KnKut 18 Piece National Course Tap/Drill Bit Set

  • No Center Punch or Pilot Hole required for drill bit.
Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

Tap Drill Bit Set, M3-M10 Tap Drill Bits Kit Titanium Coated HSS Drill and Tap Bits 1/4\ Hex Shank Metric

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-5/16-18-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-3/8-16-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

Thread Taps Drill, Rust Resistance Spiral Combination Tap Better Chip Removal 7Pcs/Set for Drilling(#1)

  • High Speed Steel: Titanium plating combination drill taps are made of high speed steel, which can ensure sharpness, fast execution and maintain strength and efficiency..
  • Spiral Flute Design: This is a tap drill with a spiral flute design, which has a better chip removal effect..
  • Processing: The tap can process wood, plastic, aluminum, tin alloy, Mg alloy, and the thickness of the workpiece is less than 5mm..
  • Chamfer in One : Combination of hole tapping and chamfering, convenient operation, hand drill, bench drill, and hexagonal chuck tapping machine are optional..
  • Improve Work Efficiency: The drill bit can quickly complete the work, which greatly saves processing steps and time costs, and improves work efficiency..
Check Stock

2 Pieces Spiral Slow Feeder Insert Slow Feeder Dog Bowls Accessories Dog and Cat Feeding Pet Supplies Turn a Dog Bowl or Dog Dish into a Dog Bowl Slow Feeder to Slow Down Eating (Blue,Basic Style)

  • Rich in quantity: you will receive 2 pieces of slow feeder bowl inserts, sufficient quantity to meet your daily needs, easy to clean and change in time, improve the cleanliness of your dog's food, nice gifts for your dog.
  • Usage: this slow food dog bowl plug in adopts spiral design, which can better slow down the dog's eating speed.
  • The base adopts suction cup design, which is easy to install.
  • Note: add some water to the suction cup to discharge all the air at the bottom of the suction cup, which can be more firmly adsorbed on the dog bowl.
  • Reliable use: the plug in of this dog slow feeder is made of flexible quality silica gel material.
  • It can be easily installed into bowls of different sizes (Note: please check the size before purchase, it is not recommended to use too large dog bowls), and replace your stainless steel or ceramic dog bowl with slow food dog bowl.
  • Suitable size: the size of this product is about 5 inches wide and 2.4 inches high, and the suction cup base is about 3.5 inches wide.
  • It is suitable for most dog bowls, but it is not a toy and should not be put in ....
Check Stock

Union Butterfield TN1585(UNC) High-Speed Steel Spiral Point Tap, TiN Coated, Round with Square End, Plug Chamfer, H5 Tolerance, 3 Flute, 1/4\-20 Thread Size

  • Spiral point tap pushes chips ahead of tool to reduce clogging.
  • Spiral point and straight flutes for cutting threads in through holes.
  • Titanium nitride (TiN) coating combines hardness with low friction for extended tool life and faster cutting.
  • Relieved-style design reduces friction between tap and workpiece for reduced tool wear.
  • Plug chamfer for easier starting and correct perpendicular alignment.
Check Stock