Top Slurry Injection Pump

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

  • The fuel injector tester kit is designed to identify and diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
  • Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
  • Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pre....
Check Stock

kipa Oil Injection Conversion Fuel Pump kit for Johnson Evinrude Outboard VRO 5007420 No Vro

  • Top Quality KIPA Oil Injection Fuel Pump, Improve throttle response for better boat engine performance, Steady flow..
  • MPN: Brand new aftermarket replacement Oil Injection Fuel Pump Replace For Johnson Evinrude 5007420, 175109, 436203, 438094, 435560, 438400, 435953, 435556, 435558, 435784, 0175109, 5004558. NO Vro.
  • This pump kit Does NOT have the 4-wire warning system or services a "VRO style" fuel pump. No sensor plug included, It Fits for most Johnson/Evinrude outboards without VRO system thru 2006 classic style. Please do match the structure and the OE Part Number, make sure it's the same as your stock one..
  • Brand new aftermarket fuel pump and it works like a charm, besides it also contains fitness accessories as pictured which is the main source for the fuel pump function. Just swap out everything the same as the old pump out it in..
  • Each of them are tested again and again in the factory, Easy to install and go directly, Manual is not included, You may search lots video online, And they Will demonstrate How it will deserve.
Check Stock

BYS VRO Oil Injection Conversion Fuel Pump Kit for Johnson/Evinrude 5007420 5007422

  • ▶ This VRO system conversion non-oiling fuel pump for 90hp-250hp Johnson & Evinrude Outboard motors. Fits V6 Crossflow and Looper engines but DOES NOT fit 60 degrees applications..
  • ▶ Replace Part Number：for Johnson/Evinrude 5007420,5007422.
  • OMC part # 4-7359； EMP part # 1399-07359. Interchange Part Number: for Volvo 5007420.
  • ▶ Compatibility: 5007420 VRO system conversion non-oiling fuel pump for 90hp-250hp Johnson & Evinrude Outboard motors..
  • ▶ 5007420 VRO Oil Injection Conversion Fuel Pump is specially designed to exact OEM standards manufactured and tested,to help deliver optimum performance in Johnson/Evinrude engines,provides a good engine performance,which gives your machine the new power and torque it really deserves..
  • ▶ Package Includes: 1x VRO Oil Injection Conversion Fuel Pump Kit..
Check Stock

GlobMarble Concrete CounterTop Slurry Mix, Concrete Pin Hole Filler. 3.5 LB Pail

  • Counter Top Slurry Mix. White Cement slurry (3.5 lb pail, 1.59 kgs).
  • Used as filler for voids in PreCast Concrete and Concrete Countertop pieces.
  • Single component, just add water, cement based chemical patching compound used for concrete restoration and patching of spalled or spalling concrete.
  • Used with a concrete restoration system, it provides a workable, no-slump patch that sets quickly for quicker return to service.
  • COVERAGE Depends upon application and substrate 1 - 3.5 lb. (1.59 kg) pail of Concrete Slurry for Countertop = approximately 56 in³ (918 cm³).
Check Stock

0-140 PSI Fuel Injector Pump Injection Tester Test Fuel Pressure Gauge Kit Car Tools,Fuel Injection Pressure Tester Updated TU-114 Fuel Pressure Tester Kit Gas Oil Pressure Tools for Cars and Trucks

  • ▲ Universal Design:The included adapters, hoses and fittings cover all fuel injection systems and most cars, auto and vehicles..
  • ▲ Ideal For Mechanics:Fuel Injection Pump Pressure / Oil Combustion Spraying Pressure Gauge Teste..
  • ▲ Durable: Designed for repeated use with high quality materials,Anti-corrosion materials to ensure long lasting using life..
  • ▲ Easy Installation and Help to indicates if fuel pump is defective or inconsistent in pressure flow..
  • ▲ It is a fuel injection pump pressure,oil combustion spraying pressure gauge tester,Easy to read dual scale gauge,A carry case for protable taken and so conveninet..
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

8MILELAKE 0-140PSI Fuel Injector Injection Pump Pressure Tester Gauge Kit

  • This item included adapters, hoses and fittings cover all fuel injection systems and most cars and trucks world wide.
  • Fuel Injection Pump Pressure / Oil Combustion Spraying Pressure Gauge Tester.
  • Indicates if fuel pump is defective or inconsistent in pressure flow.
  • Easy to Read Dual Scale Gauge,Gauge Calibration: 0-140 PSI (0-10 Bar).
  • Adapter Sizes: M10 / M12 / M14, carry case for easy storage.
Check Stock

Concrete Countertop Slurry Mix, Concrete Pin Hole Filler. 3.5 LB Pail, Surecrete Xtreme Series Concrete Countertop Slurry Compound. Made in The USA

  • Counter Top Slurry Mix. White Cement slurry (3.5 lb pail, 1.59 kgs).
  • Used as filler for voids in PreCast Concrete and Concrete Countertop pieces.
  • Single component, just add water, cement based chemical patching compound used for concrete restoration and patching of spalled or spalling concrete.
  • Used with a concrete restoration system, it provides a workable, no-slump patch that sets quickly for quicker return to service.
  • COVERAGE Depends upon application and substrate 1 - 3.5 lb. (1.59 kg) pail of Concrete Slurry for Countertop = approximately 56 in³ (918 cm³).
Check Stock

OTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine

  • Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
  • Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
  • Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.
Check Stock

Fuel Pressure Gauge Kit，0-140 PSI Fuel Pump Tester，Fuel Injection Pressure Tester Updated TU-114 Fuel Pressure Tester Kit Gas Oil Pressure Tools Gasoline Tester Tool

  • ...and corrosion.Durable plastic blow-molded case to protect components and provide easy transport and organization，Items are protected well in a sturdy case..
  • 【REGULAR CHECK FUEL INJECTOR PUMP PRESSURE】 High or low fuel pressure can cause many engine problems.It is mainly used to test whether the fuel supply and injection system are working normally, and to determine whether the internal components are damaged or the oil circuit is faulty. You can troubleshoot possible problems based on the vehicle manufacturer's user manual..
  • 【AFTER-SALES SERVICE】Package Included: 1x Fuel Injection Pressure Tester, As Picture Shows.Enclosed with an instruction manual.Note: Not for diesel high pressure injection pump or direct-injection engine.Buy with confidence, We provide 6 months warranty service, if you have any questions, please feel free to contact us via email.We will solve it for you as soon as possible..
Check Stock

CarBole External In Line Fuel Pump: 116 PSI High Pressure Unversal 12V Electric Pump Injection Systems Replacement for 0580464070 With Mounting Bracket Clamp (Red)

  • 100% brand new and high quality. Universal external in line fuel pump. Does not need to be mounted inside the tank.
  • Operation Pressure: 5-8bar (72.5-116 psi).
  • Flow Rate-120LPH at 6.0bar (about 31.7GPH at 87PSI).
  • Flow Rate-100LPH at 7.0bar (26.4GPH at 101.5psi).
  • Replaces 0580464070 and others but not OEM. Great for use with Mega Squirt and other aftermarket systems.
  • This pump is used for turbo/non turbo gas fuel injection systems up to 250bhp.
  • this is a universal fit pump and depending on your application some adapting will be required, installation may require skill and knowledge, no instructions are included.
  • Adopted Fuel Injection Molding Technology to upgrade the plastic parts of the product, which makes the fuel pump more durable, corrosion resistance and improve the service life of the pump.
  • Package including: 1pc high flow external fuel pump, 1pc Mounting Clamp, 2pcs rubber connection covers, 2pcs insulated terminals, 2pcs nuts, 2pcs gasket, 1pc bolt for bracket.
  • NOTE: It can only be used for gasoline and diesel, and CAN NOT be used for fuel containing methanol or ethanol, nor is it suitable for pumping water or oil..
Check Stock

Michigan Motorsports Rack Cap Fitment for 1994 thru 1998 Dodge Cummins, Fits all P7100 injection pumps 2500 3500

  • Rack Cap for 1994-1998.5 Dodge Cummins Diesel & Bosch P7100 Pump,.
  • The Billet Rack Cap allows full rack travel of the P7100 injection pump. This Rack Cap is drilled deeper than the stock rack cap to provide more rack travel. By allowing 4mm more travel, the horsepower gain will be impressive!.
  • Fits ‘94-‘98.5 Dodge Cummins and all P7100 injection pumps.
  • Replaces: Bosch part 2095 and Bosch part #2423462000.
  • Made of the highest quality materials available..
Check Stock