Top Small Angle Gauge

75x25x36 AP30 Stainless Steel Angle Gauge Precision Micro Block Milling Adjustable Angle V Block Milling

  • 【PREMIUM STAINLESS STEEL】Our angle v block milling is made of high-quality stainless steel. This angle gauge has the advantages of surface hardening and durability.
  • 【NICKEL PLATED WORKING FACE】We carry out nickel plating treatment on the working surface of each degree angle plate angle, and the parallelism and perpendicularity of the rust removal of this adjustable angle v block are finely ground to 0.01mm.
  • 【FIXED ANGLE PROCESSING】This precision gauge can use the cursor to indicate the stepless tilt adjustment angle, and then fix it with screws to make various fixed angle processing and inspection workpieces.
  • 【ANGLE V BLOCK】The corner V-shaped block has the characteristics of high precision and easy operation. This micro v block milling can meet your various work needs.
  • 【WIDELY USED】This high precision angle gauge uses adjustable angle grinders and adjustable blades on milling machines, planers, and drilling machines. After the workpiece is processed, this stainless steel block milling crosses or clamps the workpiece with other fixtures, such as processing inclined planes, inclined hole drilling, etc.
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial Arm or Table Saw

  • ...ows you to make adjustments to change the angle to your fence so you saw safely with a consistent and reproducible taper.
  • EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the marked angle, adjusted taper width until both measurements are equal, set the taper guide against the fence and board against taper guide, align marked angle line to saw blade, and cut moving both the taper guide and wood piece along saw.
  • CONTENTS: Package includes (1) pair of jig legs, (1) scale, (1) locking bracket, (1) work stop, (1) handle, assembly hardware, and assembly instructions.
Check Stock

DeWalt 5140032-78 Replacement Table Saw Miter Gauge

  • The purpose of a miter gauge is to allow user to position and safely guide the workpiece. This replacement miter gauge is simple to install, which minimizes downtime..
  • The miter gauge only fits DeWalt DWE 7490X Type 1, DWE 7490X Type 2, DWE 7491RS Type 1, DWE 7491RS Type 2, WE 7499GD Type 1, DWE 7499GD Type 2.
  • The miter bar swize is 22.5mm x 9.2mm x 300mm(W x H x L)..
  • There are lines for every one angle on miter gauge body, including larger lines at the five degree marks( 30, 45, 60, 75 and 90 ).This allows you to adjust the miter gauge to any angle you need..
Check Stock

Performance Tool W485 Pocket Precision Reference Cards Kit Set, 1 Pack

  • Card (1) Includes: AWG wire gauge, nail gauge, SAE and MET hole gauges, and pipe diameter gauge.
  • Card (2) Includes: SAE and MET rulers, angle gauge, radius gauge, circle compass, drafting shapes and curves.
  • Card (3) Front Includes: Angle formulas, geometric formulas, standard abbreviations, fraction to decimal equivalents, and wood measuring chart.
  • Card (3) Back Includes: Compass rose, electrical abbreviations, roman numerals, and conversion charts.
  • Conversion Charts Include: Speed, temperature, distance, time, power, weight, fluid, torque, area, and volume.
Check Stock

Longacre® 50417 0-60 PSI Analog Tire Pressure Gauge 2 Inch

  • Ensure precise tire pressure readings on your car, bike, or motorcycle with this accurate tire gauge that ranges from 0-60 PSI.
  • This mechanical air pressure gauge is simple to use and features a large glow in the dark gauge face with easy to read numbers.
  • Features a high flex hose and includes both an angle and ball chuck for added convenience and easy access to the tire valve from any angle.
  • The tire gauge contains a built-in tire pressure deflator valve to drop your pressure to your desired level and reduce pressure in overinflated tires.
  • Built-to-last air pressure gauge that includes a protective shock-resistant rubber bumper around the face of the gauge.
Check Stock

Longacre® 52-53003 Semi Pro Digital Tire Pressure Gauge 0-60

  • This digital tire pressure gauge features a large, 2 ½” inch face with easy to read numbers and backlight, providing high visibility in the dark.
  • Save battery life – this digital gauge is programmed with an auto shut-off function and comes with 2 replaceable AAA batteries for added convenience.
  • The swivel angle chuck allows you to find your tire valve at any angle - a ball chuck and 17" flexible hose are also included with this digital gauge.
  • Maintain tire pressure with confidence - this air gauge reads to .1 psi with .5% accuracy with consistent results and is user switchable to metric.
  • Built-to-last, this digital air pressure gauge includes a protective, shock-resistant rubber bumper around the face of the gauge.
Check Stock

PREXISO Angle Gauge Magnetic, Angle Finder - Digital Level Electronic, Protractor Angle Cube Inclinometer for Woodworking, Table Saw, Construction, Masonry, Machinery, 0-360° Bright Backlit Display

  • 2 Measurement Modes & 4 Units – Turn on the equipment to directly enter the ABSOLUTE measurement mode, and press the ZERO button to switch to the RELATIVE measurement mode.
  • This equipment fast measurement displays angles in degrees, %, mm/m and IN/FT.
  • Magnetic V Groove Base & Auto Reversible Display – The pocket angle finder features sturdy V groove edges, a strong magnetic base.
  • When upside down, the LCD display with backlight auto rotates, ensure fast and clear reading.
  • TIPS: If the angle gauge is used in an incorrect position (tilts diagonally over 30 degree), screen display ERROR to remind users to use correctly.
  • Accurate Angle – This angle finder tool measures, sets angles, and if a surface is level.
  • PREXISO angle gauge has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles.
  • The measuring range is 0 to 360° (4×90°), buzzer will alert when it’s within ± 1° to the horizontal or vertical position.
  • Compact Design & Calibration Function – Mini angle gauge fits in your pocket or the storage bag that comes included to protect the equipment surface from wear.
  • The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so ....
Check Stock

Milescraft 7334 Safety Bundle - Includes Feather Board, Push Stick, and FREE Grabber push block. Ideal for use on router tables, table saw, jointers, and even band saws , Yellow

  • ❤ The table saw miter gauage all-aluminum guide rod and all-aluminum baffle can be modified and expanded..
  • ❤ 【Miter gauge cuts accurately】Loosen the knob to quickly adjust the angle, which can be used for precise angle cutting..
  • ❤ 【The table saw miter gauge is easy to operate and safe to use】. The miter gauge can adjust the angle adjustment knob according to the angle of the object to be cut,.
  • ❤ 【Table saw miter gauge can cut objects of different shapes and sizes】..
  • ❤Perfect for Wood Cutting Projects: Can be used on table saws, bandsaws, router planers, lockstitch machines. If there is a product quality problem, any problem, we can replace it at any time (please see the picture size) and its slideshow.
Check Stock

Longacre® 52-52034 0-15 PSI Tire Pressure Gauge, 2 Inch

  • High visibility - the 2" glow-in-the-dark face makes this Longacre tire pressure gauge easy to read and use any time of the day or night.
  • Features a flexible hose and includes both an angle and ball chuck for added convenience and easy access to the tire valve from any angle.
  • Built-to-last, this Longacre air pressure gauge includes a protective, shock-resistant rubber bumper around the face of the gauge.
  • This tire pressure gauge features an internal gauge damper for more consistent and accurate readings each and every time.
  • Properly inflated tires save fuel, last longer and increase the handling and performance of your street car, race car, truck, motorcycle, or bike.
Check Stock

Relitec Contour Gauge Duplicators, Simple Shape Contour Gauge Duplication, Instant Template For Curved and Odd Shapes, Easy Master Outline Gauge Tool for Cutting Set of 2 (5' Widen and 10' Widen)

  • 【 Widen Design 】Relitec contour duplication gauge comes in two sizes, one is green 5 inches length (14.6 cm), and the other one is red 10 inches length (27.5 cm). Our contour gauge depth increased by 50%, the measuring depth is 3 cm wider than regular, it can be used in more items. The small size 5 Inch measuring ruler is convenient for you to carry around and measure in the field..
  • 【 Durable Plastic Profile Gauge 】Made of ABS plastic, the contour gauge is tough, durable, high strength, and will not scratch the original finish of the shape being duplicated.已品牌备案，跟卖送小红旗！.
  • 【 Perfect Fit and Easy Cutting 】Contour gauge duplicator can be used to copy whatever kind of irregular shape easily. You just need to press the profile gauge's teeth against the object to match the profiles or edges, and then precisely transfer to the item what you need to cut. It’s a ultimate template measuring tool..
  • 【 Easy To Use 】 The contour gauge tools are easy to use, just press the contour gauge's teeth against the object, fit the shape of the target object well, then track the shape you need while reading the object size.
  • 【 Wide Application 】Contour gauge is used widely in winding pipes, circular frames, ducts, tiles, laminate, ca....
Check Stock

Longacre® 52-53036 100 PSI Digital Tire Pressure Gauge

  • This digital air gauge features a 2" face and includes a protective, shock-resistant protective bumper for long life.
  • Ensure precise tire pressure readings on your car, bike, or motorcycle with this accurate tire gauge that reads to .2 psi with .8% accuracy.
  • Features a 14" high flex hose and includes both an angle and ball chuck for added convenience and easy access to the tire valve from any angle.
  • The digital tire gauge contains an air pressure release button to drop your pressure to your desired level and reduce pressure in overinflated tires.
  • The pressure reading is always active with this digital air gauge, as it does not hold pressure.
Check Stock