Top Small Diameter Rubber Hose

Feelers 1/2" Garden Soaker Hose 15 Ft with Soaker Hose Fittings, Round Rubber Garden Drip Hose 70% Saving Hose for Garden Beds,Lawn and Plants

  • High quality rubber hose: Our soaker hose is made of rubber and PE material, which optimizes the pressure resistance of the hose and makes it difficult for the hose to burst. Its operating pressures range from 30psi to 60psi, with an inside diameter of 1/2"(12mm) and an outside diameter of 5/8"(16mm). Water can slowly seep out of the hose to provide the plants with proper moisture..
  • Connector: The soaker hose comes with a 3/4" NPT threaded connector. The gasket inside the connector adds many small holes to reduce the water pressure and prevent the connector from leaking water. In addition, the clamp we are equipped with can be used to replace the brass ring and prolong the service life of the hose..
  • Water saving: The hose is arranged along the direction of the plant, and the water slowly exudes from the pipe wall, extending the time that the water stays at the root of the plant. This reduces over irrigation and saves up to 70% of water..
  • Versatile usage: The soaker hose connector can be connected to other hoses, and it can be above ground or buried underground. Suitable for lawn, garden, flower bed and other places, especially for fine irrigation of rows of plants..
  • Package included: 1/2" x 15ft(4.5m) soaker hose, clamps x2, 3/4" male x1, 3/4" femal....
Check Stock

Beer Gaskets，50 Pieces Keg Tap Line Washer Black Rubber Coupling Gasket for Beer Seal（1/8 inch Thickness ）

  • What you get: you will receive 50 pieces of rubber washer gaskets in total, sufficient quantity to meet your needs and no need to worry about losing.
  • Measurement: the outer diameter of our hose rubber gasket is approx. 20.3 mm/ 0.8 inch, 12.5 mm/ 0.5 inch for inside diameter, the thickness is approx. 0.13 inch, proper size for your using needs.
  • Wide applications: our water hose rubber gasket is suitable a ideal choice for keg couplers and shanks, leakproof and convenient to use, practical and widely applicable.
  • Simple design: the classic simple design is lightweight and portable, you can take some pieces when you go for a family dinner party, help to to solve the wasting problem and add more interests to life.
  • Material: our rubber gaskets are made of EPDM rubber, which is waterproof and not easy to get rot, durable and you can store for a long time, small but important items in your daily life.
Check Stock

LUTER Garden Hose Washers, O-Ring Rubber Washers Seals Self Locking Tabs, Pack of 30

  • PACKAGE: Pack of 30 black garden hose washers with 4 small outer tabs, good replacement parts for garden hoses. Enough quantity to repair and replace..
  • SIZE: Each is a regular specification. 1" (25mm) outer diameter, 5/8”(16mm) inner diameter, 1/8” (3mm) in thickness, fit for all standard 3/4" garden hose fittings..
  • MATERIAL: Made from heavy duty rubber, durable and tight, leak-free and stopped spraying. Not fall out when undoing the garden hose..
  • EASY TO ASSEMBLE: Disconnect water controller, then twist the faucet and replace the original one. Easy to replace and fix a leaky water tap connection.These washers seals are all function perfectly..
  • APPLICATIONS: The o-ring seals fit great on the rainwand, the hose-reel and the pistol-grip. Also suitable for all kinds of watering accessories such as garden hose fittings, water faucet, spray nozzle, hose splitter, other garden connectors, etc..
Check Stock

24" Stainless Steel Radiator Flexible Coolant Water Hose Kit with Caps Universal

  • ◆ This kit can be used with 1-1/4" radiator necks, Application: Universal.
  • ◆ Hose Length: 24", Hose Diameter:1-5/8”.
  • ◆ Flexible design eliminates the hassle of finding a rubber hose with just the right bends plus stainless steel hose will not fall apart or rot out like a rubber hose.
  • ◆ Adjustable Hose, Adjustable Clamps, Feature Flexible Stainless Steel Hose.
  • ◆ Package includes: 24" Stainless steel hose 1-5/8" O.D., 2 polished Aluminum ends, 2 rubber sleeves 1-3/4" I.D, 2 rubber reducers 1-1/4" I.D..
Check Stock

30 Pieces Replacement O-Rings Sealing Ring and Garden Hose Washers for 3/8 inch Quick Connector 3/4 inch Standard Garden Hose

  • Considerable amount：20 pieces replacement o-rings sealing ring and 10 pieces garden hose washers rubber washers seals spares kit.
  • The O-ring size: outside diameter: 17.1 mm.
  • Designed fitting for 3/ 8 inch quick connect.
  • Garden hose washer size: outside diameter: 1 inches/ 25 mm, inside diameter: 5/ 8 inches/ 16 mm.
  • Fit all standard 3/ 4 inch standard garden hose fittings, hose thread connections.
  • Water saving: save water by reducing your leaks due to worn washers and O rings, and simply use one to replace any cracked or leaking washer to fix leaks at hose connections.
  • Good quality NBR rubber: resists most types of weather: hot, cold, freezing, hardening, and cracking.
Check Stock

Dust Collection Fittings with Shop Vac Hose Adapter Accessories 4 in to 2 1/2 in plus 2 1/2 inch Vacuum Hose Adapter for Shop Vac Attachments In Your Work Shop Wet Dry Vac Attachment Exhaust Kit

  • Dust Collector Accessories for the everyday craftsman - Included are 3 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Small dust collection system. See photos for detailed measurements..
  • Connect your 4" inner diameter hose to 2 1/2" dust collection hoses.*** NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly. A rubber coupler or a short section of hose will let you connect this adapter directly to your dust collection port..
  • 2 1/2 in. Wet/Dry Vacuum Universal Tool Adapter Attachment - Made out of rubber this vacuum adapter can be cut to fit various sizes. Connect it to your wet dry shop vac accessories. If it doesn't fit apply some heat by running it under hot water. This will loosen the rubber and allow it to fit snug. Check the diameter i the photos to see what size your hose needs to be..
  • Use the shop vac attachment to connect more accessories to your dust collection system. The shop vac adapter dimensions are 2 1/2 to 1 1/4 inches. Fits most wet dry vac attachments but ***check photo for dimensions.***.
  • These 3 adapters can be used if you need a universal vac attac....
Check Stock

9.85-Foot/3m Length Stretchy 1/4 Inch ID Fuel Line+20pcs 1/3\ ID Hose Clamps for Lawn Mower Tractor Kawasaki Kohler for Briggs & Stratton motorcycle snow blowers Small Engines

  • Product name: ID Fuel Line Kit with 10PCS 2/5" (11mm) ID Hose Clamps..
  • Thickened pipe wall design: The fuel pipe is divided into three levels: inner pipe, middle layer and outer pipe. The inner diameter is about 1/4" (6mm), the outer diameter is about 0.53" (13.5mm) and the wall thickness is about 0.16" (4mm)..
  • Product material: the inner tube is made of rubber, and the middle layer is made of fiber thread. The hose clamp is made of spring steel.
  • Product advantages: comfortable appearance, smooth and flat.
  • high and low temperature resistance, wear-resistant rubber fiber layer can be woven, can make the hose withstand greater pressure, used for connection, fixation, and ensure its stability..
  • Scope of application: suitable for small engines: tractors, lawn mowers, snow machines, power equipment, etc..
Check Stock

O'SKOOL 4-Inch (Inside Diameter) to 2-1/4-Inch (Inside Diameter) Dust Collector Fitting Vacuum Tool Port Adapter

  • Includes: 4" to 2-1/4" Dust Hose Reducer Adapter Fitting x 1.
  • Durable ABS plastic end with 2-1/2" OD (outside diameter) and 2-1/4" ID(inside diameter) is perfectly suited for standard shop vacuum hoses..
  • Rubber boot(4" inside diameter ) and a hose clamp fit a 4" outside diameter power tool port..
  • ABS plastic port is tough and wear-resistant, which can extend the use time..
  • Rubber boot ensures tight fit, even variations in port size..
Check Stock

Triumpeek 3/4\ Brass 2 Way Hose Splitter, Brass 2 Way Garden Hose Connector with 2 Pcs Garden Hose Coiled Spring Protectors and 6 Rubber Washers

  • PACKAGE INCLUDING 2 way hose connector*1, hose coiled spring protector*2, and extra hose rubber washers*6.
  • 2 WAY Y GARDEN HOSE CONNECTOR: Water intake internal diameter: 3/4 inch. Water outlet external diameter: 3/4 inch. Fits all 3/4 inch standard garden hose. 2 valves for flow control. Bear water pressure up to 80 PSI..
  • HOSE COILED SPRING PROTECTOR: 3/4" thread connection. Length is about 5.7". The hose is surrounded by the high-carbon steel coils, which can protect your water hose from kink..
  • PREMIUM MATERIAL: Triumpeek 2 way hose connector and the hose coiled spring protectors are made of rust-proof brass and premium stainless steel. All the connectors and fittings are precisely processed. The O-ring rubber washer provides a tight fit and leak-free connection..
  • VERSATILE APPLICATION: Triumpeek quick release hose connector is widely used for garden hose, water line connector, faucet, water washer pressure, lawn sprinkler, water nozzle, and other garden accessory..
Check Stock

Russell 632180 ProFlex -10AN Stainless Steel Braided Hose - 15 Feet

  • Superior bonding eliminates hose fraying when cut.
  • Secondary rubber jacket increases overall flexibility.
  • Used with small oil, fuel lines, fuel gauges and vacuum lines.
  • 308 stainless wire braid outside construction provides durability and resists heat.
  • Actual I.D. (Inside Diameter) is 9/16, nominal I.D. is 5/8 and outside diameter is 25/32 with -10 size.
Check Stock

Goplus® 50ft Twin Welding Torch Hose Oxy Acetylene Oxygen Cutting 1/4-Inch 300psi

  • ...igh quality rubber material, our rubber welding hose be used on extreme environment. Not only does it have excellent performance in low temperature, even in subzero temperatures, but also has good oil and abrasion resistance, which prolongs the life of the hose in a maximum effect..
  • 【Sufficient Length and Standard Diameter】 The whole length of each welding hose is 50 feet. It is long enough for daily life use or industry and agriculture use. Other than that, with standard diameter, 1/4”, our oxyacetylene twin welding hose has wide application, which meets most people’s needs..
  • 【Multifunctional Twin Welding Hose】 On the one hand, our twin welding hose can be used for welding machine. On the other hand, it has outstanding performance in gas cutting function, as well. Except for that, the twin gas welding hose can also be used for transporting gas, which is a good choice for industry and agriculture, traffic and daily life..
  • 【Easy to Use and Store】 This very flexible twin welding hose can easily lace throughout an engine compartment and around tight turns. When you don't need to use it, you can make it a circle, which help you to store it conveniently. It is worth mentioning that, circular design effectively eliminates kinking and tangling..
Check Stock

20 Pack 3/4 inch Garden Hose Washers Rubber Washers Seals for Standard Garden Hose and Shower Hose O Ring (Orange)

  • 20 Pack garden hose washers: rubber washers are suitable for garden hose and garden water head replacement.
  • Good replacement part for garden hoses with hand held water heads.
  • Washers size: the garden rubber washer external diameter is 24 mm/ 1 inches, the internal diameter is 16 mm/ 5/8 inches, the thickness is 3 mm/ 1/8 inches.
  • Durable rubber material: these washers are made of good quality rubber and makes a good seal, prevents leakage between the water tube and water tap.
  • Easy to replace and fit: these garden hose washers seals are good to have on hand for repairing a leaky shower head connection.
  • Package includes: pack of 20 rubber washers.
  • They also work for attachments, such as extensions, portable garden heads, handheld garden head, etc..
Check Stock