Top Small Engine Nitrous Kit

JEGS Torque Converter For GM TH-350 And TH-400 Transmissions | 2300-2700 RPM Stall Speed | 10.75” Flexplate Bolt Pattern | 500 Horsepower Maximum Applications

  • PERFORMANCE FOR STREET AND TRACK USE for improved launch and acceleration.
  • MADE IN THE USA using high quality materials and assembly.
  • 2300-2700 RPM STALL SPEED to match your engine and camshaft needs.
  • IDEAL for small block applications up to 500 horsepower without nitrous or super/turbochargers.
  • ECONOMICALLY PRICED for performance on a budget.
Check Stock

Brian Tooley LS1 Rocker Arm Trunion Kit 4.8 5.3 5.7 6.0 6.2 Trunnion – No bolts

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Doesn’t include upgraded bolts – stock bolts can be used..
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Offroad Go Kart Cart Dune Buggy Sand Rail 250 125 cc NO2 NOS Nitrous Oxide Kit

  • Nitrous Oxide (NOS) is the simplest, least expensive way, to provide a significant horsepower boost to your engine, and add performance you can feel in the seat..
  • More Peak Horsepower - Designed to gain 20% in Horsepower at Wide Open Throttle.
  • More Low End Torque - Torque gains are even greater as there is an increased combustion at a lower rpm range and causes the significant improvement in acceleration..
  • Low Cost, High Performance - Nitrous offers you more performance per dollar spent, than any other performance modification..
  • Easy Installation - 6 Sigma N20 installations are very easy, literally only taking a few minutes with basic hand tools to install. No wiring needed..
Check Stock

Small Engine NOS NO2 Nitrous Oxide Kit 49-250 2 & 4 Stroke, EFI & Carb +5 Bottles of NOS

  • Nitrous Oxide (NOS) is the simplest, least expensive way, to provide a significant horsepower boost to your engine, and add performance you can feel in the seat..
  • More Peak Horsepower - Designed to gain 20% in Horsepower at Wide Open Throttle.
  • More Low End Torque - Torque gains are even greater as there is an increased combustion at a lower rpm range and causes the significant improvement in acceleration..
  • Low Cost, High Performance - Nitrous offers you more performance per dollar spent, than any other performance modification..
  • Easy Installation - 6 Sigma N20 installations are very easy, literally only taking a few minutes with basic hand tools to install. No wiring needed..
Check Stock

Small Engine NOS NO2 Nitrous Oxide Kit 250-500 2 & 4 Stroke, EFI & Carb +5 Bottles of NOS …

  • Nitrous Oxide (NOS) is the simplest, least expensive way, to provide a significant horsepower boost to your engine, and add performance you can feel in the seat..
  • More Peak Horsepower - Designed to gain 20% in Horsepower at Wide Open Throttle.
  • More Low End Torque - Torque gains are even greater as there is an increased combustion at a lower rpm range and causes the significant improvement in acceleration..
  • Low Cost, High Performance - Nitrous offers you more performance per dollar spent, than any other performance modification..
  • Easy Installation - 6 Sigma N20 installations are very easy, literally only taking a few minutes with basic hand tools to install. No wiring needed..
Check Stock

Kyosho MBC Initial D Mazda RX-7 FD3S MZQ103

  • ...ng wheel steering, opening hood, trunk and doors, detailed engine bay, rearview mirrors, articulated suspension, upgradable parts such as lights, spoilers, engine, wings and a detailed interior with a front double seat. This car building model has exquisite car stickers, RedSuns team logo stickers and even separate nitrous oxide tank like in original Initial-D series!.
  • EASY LEVEL STEM TOYS – Educational development toy consists of 1552 pieces/bricks. Along with a comprehensive colored step-by-step instruction manual for hassle-free assembly. Completely compatible with LEGO and a power system with RC that can be bought separately (not included) our car building kit is suitable for kids aged 8 and above!.
  • COLLECTIBLE AND GIFT BUILDING SET – This detailed Ryosuke Takahashi’s Mazda RX-7 FC35 brick car model kit is a fine gift for the fans of the japan manga movie and a racing car! Include the display stand and a special brick with the Initial-D emblem and a 25th anniversary sign. The result: a wonderful combination of the manga and brick building!.
  • PROMISE OF QUALITY – Car building kits for kids ages 8+ are must-have stem educational toys to help boost their cognitive functioning, problem solving, and teaches them perseverance & patience. Certified ....
Check Stock

Nitrous Express 20934-10 90mm EFI Nitrous Kit with 4-Bolt Plate for GM LS Engine

  • Nitrous Express Nitrous Oxide Injection System Kit 20934-10.
Check Stock

NEW 55-57 CHEVY FRONT ENGINE MOUNT KIT WITH BRACKETS FOR SBC V-8 ENGINES, BLACK POWDER COATED, INCLUDES SHAFTS & RUBBERS, 1955 1956 1957 TRI-5 150 210 BEL AIR DELRAY NOMAD SEDAN, SMALL BLOCK CHEVY

  • Brand New Southwest Speed Front Engine Mounting Kit that includes O.E. Replacement Front Engine Mounts, and Powder Coated Black Engine Mounting Brackets that fits 1955-1957 Chevy's with Small Block Chevy V-8 Engines (SWS # 400-6897) > The engine mounts on your Tri-Five Chevy are crucial for reducing vibration and extending the life of your engine and its components.
  • This Southwest Speed 1955-1957 Chevy front engine mounting kit mounts the Small Block Chevy engine in the correct location in 55-57 Tri-Five Chevy’s The front engine mounts includes the shafts, rubbers, washers, nuts, and lock washers that are usually missing or worn out on 55-57 Tri-Five Chevy's > This kit will do both sides, and includes everything pictured to restore the mounts back to new condition.
  • The Mounting brackets are Powder Coated Black and are the OEM replacement brackets with all the correct contours This kit includes both the left and right side front engine mounts, and both left and right side front engine mounting brackets, that includes everything pictured.
  • Note: These engine mounting brackets will only bolt on the early Chevy Engine Blocks that have the 4 bolt holes tapped 3/8"-16 in the front > These tapped holes are located in the cast bosses, that are either side of t....
Check Stock

Coleman Powersports 196cc/6.5HP CT200U Gas Powered Mini Trail Bike NOS Nitro Nitrous Oxide & Boost Bottle Kit

  • Nitrous Oxide (NOS) is the simplest, least expensive way, to provide a significant horsepower boost to your engine, and add performance you can feel in the seat..
  • More Peak Horsepower - Designed to gain 20% in Horsepower at Wide Open Throttle.
  • More Low End Torque - Torque gains are even greater as there is an increased combustion at a lower rpm range and causes the significant improvement in acceleration..
  • Low Cost, High Performance - Nitrous offers you more performance per dollar spent, than any other performance modification..
  • Easy Installation - 6 Sigma N20 installations are very easy, literally only taking a few minutes with basic hand tools to install. No wiring needed..
Check Stock

84005207 793880 Camshaft - for Briggs & Stratton 793880 793583 792681 791942 795102 Cam Replacement Kit with 795387 Oil Seal Ring and 697110 Crankcase Gaskets

  • Camshaft Replaces Part Number: Replacement Camshaft Kit for Briggs & Stratton 793880 84005207 793583 792681 791942 795102, Crankcase Gasket 697110, Oil Seal 795387..
  • Fits Model Engines 4 Cycle Small Engine: Fits Many Engine Models 210702 210807 212702 212707 212802 212902 212907 214707 215702 215705 215707 215802 215807 31B700 21A800 210700 212700 212900 215700 215900 216900 217800 219800 21B800 28BH00 31A500 31A700 31C700 31E500 31E700 31G700 31K700 31M700 31M900 31N800 31P700 31P900 31Q700 282H00 31E877 331777 4 Cycle Small Engine Camshaft, Also Suitable 215000 Model Engines 4 Cycle Small Engine Camshaft..
  • Fits Engines Model: High Quality 84005207 Camshaft Replacement kit fit for 21R7 (10.5HP) / 21R8 (11.5HP) / 31R5 (13.5HP) / 31R6 (14.5HP) / 31R7 (15.5HP) / 31R8 (16.5HP) / 31R9 (17.5HP) / 33R7 (18.5HP) / 33R8 (19HP), ( NOTE !!! Please Check Your Part Number And Our Fitment Before Placing Order. Before Doing Any Small Engine Repair Or Maintenance ).
  • Package list: 1 x 793880 84005207 Camshaft, 1 x 697110 Crankcase Gasket, 1 x 795387 Oil Seal kit, 1 x 272475s Gasket, 1 Connecting rods kit.
  • 180-DAY MONEY-BACK GUARANTEENot satisfied with your purchase? We aim to make your shopping experience as hassle-free as possible. With our 180-day money-back ....
Check Stock

Predator 212 cc Engine Hemi & non Hemi Performance 4 Stroke Go Kart Mini Racing MicroBurst NOS Nitro Nitrous Oxide Injection Kit with Carb Jet Upgrade

  • Nitrous Oxide (NOS) is the simplest, least expensive way, to provide a significant horsepower boost to your engine, and add performance you can feel in the seat..
  • More Peak Horsepower - Designed to gain 20% in Horsepower at Wide Open Throttle.
  • More Low End Torque - Torque gains are even greater as there is an increased combustion at a lower rpm range and causes the significant improvement in acceleration..
  • Low Cost, High Performance - Nitrous offers you more performance per dollar spent, than any other performance modification..
  • Easy Installation - 6 Sigma N20 installations are very easy, literally only taking a few minutes with basic hand tools to install. No wiring needed..
Check Stock

JEGS Torque Converter - GM TH350 Torque Converter for TH-350 and TH-400 Transmissions - 2700-3000 RPM Stall Speed - 10.75 Inch Flexplate Bolt Pattern - 500 Horsepower Maximum Applications

  • Performance torque converter for street and track use for improved launch and acceleration.
  • Made in the USA using high quality materials and assembly. Economically priced for performance on a budget..
  • 2700-3000 RPM stall speed to match your engine and camshaft needs..
  • Ideal torque converter for small block applications up to 500 horsepower without nitrous or super/turbochargers..
  • GM TH350/TH40030-Spline 10.750 in. Bolt Circle. Stall Speed: 2700-3000 RPM. Please Note: Converter diameter may vary based on core availability. Does not fit transmissions that require lockup or clutch converters. Small (10.75 in. diameter bolt circle) flexplate or dual pattern flexplate required. For big block applications, use JEGS XHD converters..
Check Stock