Top Small Quantity Pcb

QCQIANG JQX-13F 8 Pin-10A AC 110V Electromagnetic Power Relay with Female Spade Electric Wire Connector(3pcs)

  • JQC-3F general purpose 5 pins SPST power relay PCB type mini power coil relay.
  • Contact : 7A 250VAC, 12A 120VAC/10A 125VAC, 10A 28VDC.
  • Coil 5 pins mini SPST power relay pin quantity : 5 Pin.
  • material : plastic, metal, electronic component.
  • Power relay size (Approx.) : 1.8 x 1.4 x 1.9cm / 0.7"""" x 0.6"""" x 0.7""""(L*W*T),widely used in the remote control, communication, automatic control system, electronic equipments, etc..
  • Power relay PCB type compact and sealed construction. Long operational life. The relay can automatically adjust, protect and transform the circuit.
Check Stock

No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)

  • Package includes: you will receive 3 pieces of no clean solder flux pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement.
  • Suitable size: the rosin flux pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, which is convenient to hold in hand.
  • Please check the size carefully before purchasing.
  • Quality material: these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder.
  • The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents.
  • Practical tools: 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin.
  • The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
  • Wide applications: these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and ....
Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 50pcs PCB Drill Bit Set Spiral Flute Carbide 0.3mm-1.2mm Drill Bits for Dremel Print Circuit Board Jewelry CNC Engraving (5PCS Each) by BOOTOP

  • 180 Days warranty. If you are not satisfied with our products,feel free to contact us for a replacement or refund. The PCB Drill Bits may also know as micro drill bits,NCN drill bits,micro drill bits set,plexiglass drill bit set,circuit board drill bits,pcb drill set,drill bits for dremel tool,small diameter drill bits, PCB drill bit set..
Check Stock

VEVOR Preheating Oven T8280 1600W Infrared Preheating Station Hot Plate PCB Preheater 280x270MM

  • Preheating Station Work Bench Size :410x316mm.
  • Complete Preheating Oven Machine Power :1600W.
  • PCB Preheater Heating plate temperature can be adjusted: 0-450 degree.
  • Preheating Oven T-8280 Can Achieve To Heat PCB Board And Component Which Contains Lead Or Not，Especially For The BGA And SMD Parts.
  • Preheating Station Use Infrared Heat, Easy To Cut Through, Heat Proportion, Don’T Have Sirocco Flow. Don’T Shift The Small Components On The PCB Board，Ensure The Welding Quality.
Check Stock

10K Ohm Trim Potentiometer Breadboard Trim Potentiometer Kit with Knob Variable Resistors Trimmer Potentiometer Assortment Kit Compatible with Arduino, Blue (12 Pieces) (12 Pieces)

  • Package content: you will receive 12 pieces of trim potentiometers with knobs in blue color, suitable for breadboarding and prototyping.
  • Such a sufficient quantity can easily meet your daily usage and replacement demand.
  • Reliable to use: composed of quality material, these breadboard trim potentiometers are safe and sturdy, reliable and stable, will not easily break or deform, which can be applied for long-term use.
  • Reasonable design: with round pins rather than flat blade pins of other trimpots, these linear potentiometers are suitable for both breadboarding and PCB.
  • The knurled knob with arrow design allows you to easily adjust by hand or small flat blade screwdriver.
  • Specification: these trim potentiometers adopt linear resistance change mode, the rotation angle is 270 degrees, and adjustable range is 0-10K ohm, which are easy to connect and can work well.
  • Dimension information: each rotary potentiometer measure approx. 0.375 x 0.375 x 0.19 inch/ 9.5 x 9.5 x 4.9 mm, such a small size only requires little space, which makes them easy for you to store.
Check Stock

Portico II Master Buss Converter

  • [EASY ADJUSTMENT] PT2399 + NE5532 continuously adjustable reverb and volume, with high performance and low noise..
  • [OUTPUT INTERFACE] With 2 microphone outputs, mixed output and music signal output, with less interference..
  • [EXCELLENT PCB] Using 1.6mm thick double sided PCB, spray tin process, ensure the good passage of large and small currents..
  • [APPLICABLE DEVICE] Support mobile coils and computer electret microphones and most wireless microphones..
  • [WIDE VOLTAGE RANGE] With DC12‑24V wide voltage range, suitable for more audio equipment, has strong practicability..
Check Stock

Soldering Station Helping Hands with Magnifying Glass Third Hand Solder Tool PCB Holder - Heavy Duty Base Plate | Four Flexible Arms

  • ...eel adjustable gooseneck arm on the soldering helping hands can be adjusted at will and not easy to rebound. Four 6.7-inch helping hands allow you to completely free your hands for better repair work..
  • 【Improve Work Accuracy】The soldering station is equipped with a 3x magnifying glass, whick can help you magnify small electronic components, third hand tool can improve your work efficiency and welding accuracy, and you no longer have to be tired of small parts..
  • 【Will Not Scratch The PCB Board】 The alligator clips on pcb holder arm are fixed with screws and can be rotated 360 degrees, and each clip is equipped with an insulating rubber sleeve, which can prevent scratching the circuit of the PCB board and prevent electrical short circuits..
  • 【Customer Satisfaction】Our service tenet is to make you 100% satisfied with our products. If the product does not meet your expectations, please feel free to send us a message via “Contact Seller”, we will handle it for you.
Check Stock

95 Pieces Hand Drill Bits Set, Black Pin Vise Hand Drill, 74 Pieces Micro Twist Drill Bits and 20 Pieces PCB Mini Drill Bits for Resin Polymer Clay Craft DIY Jewelry (0.1-1mm, Random Color Bits)

  • What You Receive: you will receive 1 piece of black pin vise hand drill, 74 pieces of micro twist drill bits and 20 pieces of PCB mini drill bits, sufficient quantity and a nice combination to satisfy your daily use and replacement.
  • Size Information: the micro twists have different sizes, 54 pieces for 0.3-2 mm, 3 pieces for each size.
  • 20 pieces for 0.3-1 mm, each size has 2 pieces, and mini PCB drills have 10 different sizes, which are approx. 0.1-1 mm, assorted sizes for you to choose, please confirm the size you need before purchase.
  • Long Serving Time: the micro drill bits set is mainly made of quality aluminum alloy, solid and sturdy for long lasting use, compact and hard wearing, and the PCB mini drills adopt reliable tungsten carbide, and the micro twist drills are made of alloy steel, hardly rusting or deforming, can be applied repeatedly, serving you for a long time.
  • Wide Range of Applications: the pin vise hand drill set can be applied for electronic assembling, tooling, model making, winding, home decorating and so on, making your daily work more convenient.
Check Stock

Jienk 5Pcs 6-Pin 300V 10A 5.08mm Pitch PCB Mount Screw Terminal Block Connector for 28-12AWG Cable

  • 【Product Name】 6 Pin, Plug-In 5.08mm/0.2" PCB Terminal Block.
  • 【Rated Voltage】300V, Rated Current：10A.
  • 【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver..
  • 【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc..
Check Stock

IDE to SATA Adapter, Upgrade PCB Hard Drive or Optical Drive Adapter Converter Kit for Sony PS2, IDE Original Network Adapter for Game, Purple

  • ★★【SPECIFICATION】❶Item Type: Adapter❷Material: for PCB❸Color: Purple❹Weight: Approx. 13.0g/0.5oz❺Application: Sony PS2 IDE original network adapter..
  • ★★【SUITABLE FOR SONY PS2】Precise cut, perfect fitness, suitable for Sony PS2 IDE original network adapter..
  • ★★【SATA HARD DISK】A large‑capacity for sata hard disk is used to replace the IDE hard disk to play the game, which will save us a lot of game loading time..
  • ★★【PCB BOARD MATERIAL】High‑quality for PCB board material, with fast operation speed and excellent performance..
  • ★★【EASY TO INSTALL】Equipped with mounting screw pack, which makes it easy to install and detach.Small and lightweight, convenient for us to storage and a good replcement accessory..
Check Stock

ODOMY 57pcs Pin Vise Hand Drill Bits Mini Hand Drill Rotary Tool,46pcs 0.3-3.0mm Micro Twist Drill Bits and 10pcs PCB Mini Drill Bits for Resin Plastic Wood Jewelry Making

  • Practical and Portable: The hand-held drill is easy to carry or store in a toolbox or pocket, making your daily work more convenient, suitable for electronic assembly, tools, model making, winding, home decoration, etc..
  • Pin Vise Hand Drill: Aluminum alloy, sturdy and durable, its tail can be rotated, sturdy and easy to operate, Ideal for making pilot holes when fixing small item that you can’t hold eg plastic sleepers on the track..
  • You Will Receive:A total of 57 pieces of electric hand drill set for you to do hand-carving DIY work, Twist drill bit: 0.3-3mm, PCB micro drill: 0.1mm-1mm, Vise: 3.5*0.6inch..
  • PCB micro drill: PCB micro drill is made of tungsten carbide, suitable for processing PCB, ordinary FR-4, CEM-3 board, SMT, CNC, mold, plastic, circuit board, carbon fiber, composite board, etc..
  • Micro twist drill: The micro drill is light in weight and compact in size. It does not take up extra space. It is used to process wood, plastic, rubber, PVC, walnut, model, bone, angle steel, amber, olive, fiberglass, and other materials..
Check Stock

SJZBIN 15W Qi Wireless Charger PCBA Circuit Board with Coil Pad Charging

  • Input: 5V 2A, 9V 1.65A, 12V 1.5A. Output: 5V 1.5A, 9V 1.1A, 12V 1.25A..
  • Features: wireless fast charging solution, USB-C interface, low temperature control, compatible with QC 18W and PD 18W..
  • Purpose: This product is only suitable for mobile phones with wireless charging function, and the rated output power is 15W..
Check Stock