Top Smd Electrolytic Capacitors

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion SLM X3 Ultra-Slim 3-Channel Passive Soundbar - Black

  • L-C-R soundbar, Slim design, Binding Posts: Push style.
  • High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
  • Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
  • Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
  • Frequency Response: 120–23,000 Hz ± 3 dB.
  • Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
  • Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
  • Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
  • Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".
Check Stock

Ciglow Frequency Divider Board,3 Way Speaker Frequency Divider,300W Crossover Filter Audio for DIY KTV Stage Speaker

  • TREBLE+MIDRANGE+BASS THREE-WAY FREQUENCY: KTV stage professional speaker crossover DIY upgrade tool to improve sound quality.
  • HIGH-QUALITY MATERIALS: high temperature resistant wire, wire wound ceramic resistor, imported metal film.
  • HIGH-QUALITY CAPACITORS: low-loss and high-quality, no longer have the problem of electrolytic capacitors.
  • ENSURE LARGE LOAD CAPACITY: long-term durability, very good sound quality.
  • OVERCURRENT PROTECTION DESIGN: simple and beautiful lines, reasonable layout of components.
Check Stock

Martin Logan - ElectroMotion ESL - Hybrid Electrostatic - Each - Black

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
  • Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
  • Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
  • Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

RuiLing 1-Pack 7 Section SMA Male Connector Aerial Telescopic Antenna Radio TV DIY Antennas DVB-T Radio Scanner VHF UHF

  • [Version] The 3.2 version of the latest program has been burned. If the version is updated, you can contact us for the latest program..
  • [Product Features] The antenna tuner is automatically tuned,KIT of ATU (Automatic Antenna Tuner) developed by N7DDC, equipped with a 0.96 inch OLED screen, the data is clearly visible..
  • [High-quality accessories] Use high-quality brand SMD capacitors, C-channel capacitors, use high-quality 1000V high-voltage SMD capacitors, and the PIC chip imported..
  • [Interesting assembly] The kit has already soldered components and chips, and will be equipped with installation instructions, which is easy to install and enjoy the fun of assembly..
  • [UHF connector] This is specially prepared for you, which provides an extra layer of guarantee and possibility for you to connect products and equipment..
Check Stock

MartinLogan ElectroMotion ESL X Floor-Standing Speaker Each (Satin Black)

  • High-frequency transducer: XStat CLS electrostaic transducer.
  • Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
  • Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
  • Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-400 watts per channel.
  • Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

Basic Electronic Components Kit Resistor 600pcs Diode 100pcs LED 6 Colors 120pcs Electrolytic Capacitor 12 Values 120pcs Transistor 18 Types 180pcs Ceramic Capacitor 30 Types 300pcs Total 1420PCS

  • All products are tested for stability, consistency and reliability,Ensure product excellence..
  • This is a great assortment of components for electronic professionals or enthusiasts..
  • The kit includes diodes, resistors, transistors, LED diodes, electrolytic capacitors, ceramic capacitors..
  • If any problem, please contact us. We will give you a satisfactory solution as promised..
Check Stock

Fielect 80Pcs Aluminum Radial Electrolytic Capacitor 10uF 63V Low ESR Green 5x11mm High Ripple Current,Low Impedance for TV, LCD Monitor, Radio, Stereo, Game

  • 【Dimension】 -Capacitor capacity:10uF.
  • 【Material】 -Electrolytic capacitors are made of high-quality standard materials, with high insulation strength, fast switching speed, high power consumption and good current performance.
  • 【Features】- The capacitor has excellent moisture resistance, small size, wide capacitance and reliable performance.
  • 【Advantage】-Each electrolytic capacitor has an identification code and a marked capacitance value, which is easy to distinguish and use.
  • 【Application】 -This series is suitable for power supply, communication equipment, switching power supply, audio amplifier interconnection level, industrial measurement.
Check Stock

OCR 24Value 500pcs Electrolytic Capacitor Assortment Box Kit Range 0.1uF－1000uF

  • The nice sturdy box helps you keep all caps in order..
  • All of the capacitor is marked the value,easy to find what you need..
Check Stock

Molence SMD 0603 0805 1206 DIY Electronics Components Kit Assortment, 3638PCS Resistor, Capacitor, LED, PCB, Diode, Transistor, Potentiometer for Arduino UNO MEGA2560 Raspberry Pi MCU

  • All products are tested for stability, consistency and reliability,Ensure product excellence..
  • 【100% brand new and high quality】Save time with this handy box full of the most practical and common e-components.
  • 【Easy to store】Each different component is packaged in a plastic bag, Resistors values are stamped with the according value.
  • 【Electronic components set include】diodes, resistors, transistors, LED diodes, electrolytic capacitors, ceramic capacitors..
  • 【Great component kit】This is a great assortment of components for electronic professionals or enthusiasts. 【Value for money】mogaopi Electronic Components Package includes 6 different kinds components, 1390pcs in total..
Check Stock