Top Smd Rgb 5050 Strip

Redgiants 10M RGB 5050 Non-Waterproof LED Strip Light 300 SMD 44 Key Remote 12V 5A Power

  • Package Content: 1x 44 key IR Remote + 1x 12V 5A Power Supply + 2x 5 meters 300LEDs 5050 Waterproof led strip..
  • 5050 Waterproof Led Strip Color: RGB (Red Green Blue) Flash SMD IP 60 LED View angle: 120° Supply voltage: DC 12V Operating temperature: -20 to 60 degree LED quantity: 300 LEDs Working Current/5Meter: 2A.
  • Lumens: 900LM Lifetime: 50,000+ hours 44Key Remote Controller Working Temperature: -20°C-60°C Output: three CMOS drain-open output Connection mode: Common Anode(+).
  • Every 3-LED cutable without damaging the rest strip Flexible ribbon for curving around bends Ultra-bright but running at low temperature Self Adhesive Strip for Easy Installation..
  • Input/Output: 12V Max load current: 2A each color Included CR2025 Remote Controller Battery with Kit USA Power Supplier Included.
Check Stock

SUPERNIGHT LED Strip Lights 16.4FT 5M SMD 5050 Waterproof 300LEDs RGB Color Changing Flexible LED Light Strip

  • 【SMD 5050 LED Rope Lights】There are RGB color leds on 16.4ft flexible PCB board. You can control the rgb led tape color like as red/ green/ blue/....
  • 【IP65 Waterproof PCB】This 5M RGB length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to....
  • 【Cuttable and Joinable】Please find the scissor mark, then you can cut the strip as you request.
  • Also you can use other strip tools to connect more....
  • 【With Adhesive Tape】On the back of PCB,there is double-side adhesive tape which can help you install it easier.(PS：Only one rgb led tape in the....
  • 【Perfect home decorations】You can install led tape lighting, under cabinet lighting, Car led lighting, Indirect lighting in crown molding, Tv Back....
Check Stock

Kingshowstar 2pc 2 Way 1male to 2 Female Splitter Y Cable for Use with 5050 LED SMD RGB NEON Accent Kits for LED Motorcycle ATV car Light Multi-Color Neon Strip

  • 2 Pcs 2 Way Splitter Y Cable For Use with 5050 LED SMD RGB NEON Accent Kits for LED Motorcycle ATV Car Light Multi-color Neon Strip.
  • This extension cable is suitable for RGB SMD 5050 LED neon light kit for motorcycle ATV cars..
  • Extremely easy to install, plug and play harness..
  • High-quality extension cord with flexible design..
  • What You Get - 2 Pcs 2 Way 1 Male to 2 Female Splitter Y Cable (Note: If you have any questions about this item, please contact us for friendly service and we will reply within 24 hours).
Check Stock

20Packs 4-Pin RGB LED Light Strip Connectors 10mm Unwired Gapless Solderless Adapter Terminal Extension for SMD 5050 Multicolor LED Strip (20Pack 4PIN RGB Connector)

  • Led Light Connectors: This LED strip connectors can support low or high wattage, perfectly meet your need of different kinds of lighting effect.led light straight connection or corner connect.
  • Easy to Use: The easiest way to connect RGB led light: Just slot the light strip into the LED connector and clamp the cover, you can achieve the ultra firmly stable connection.
  • COMPATIBILITY: The strip lighting connectors is suitable for 4-pin 10mm wide SMD 5050 RGB flexible strips.Used with L Shape,T Shape RGB Boards and X Shape RGB Boards for your ideal extension connection.
  • SAFETY AND DURABLE Fireproof Material: LED strip light connectors are made of professional flame retardant material, the working temperature is -40 ℉ ~ 221℉, which ensures our connector more durable and safer..
  • Package: 20 pack 4 pin led clip connectors, led connectors for strip lights, suitable for 10 MM led lights.
Check Stock

CHINLY 3.3ft 60leds WS2812B Individually Addressable LED Strip Light 5050 RGB SMD 60 Pixels Dream Color Waterproof IP67 Black PCB 5V DC (Black PCB 3.3ft 60leds Waterproof)

  • Length: 3.3ft , LED SMD Qty: 60pcs RGB SMD5050 per meter , Tube-waterproof IP67 , Black PCB ,DC5V.
  • Dream full color Programmable LED Strip, WS2811 IC Built in 5050SMD, 256 brightness display and 24-bit color display. Each pixel can have its own color and brightness. You can control them individually and set them to any color or animation you want..
  • Work great with Arduino, ready-to-go library, FastLED library and Raspberry Pi, etc. It’s very easy to program..
  • It comes with 3pin JST-SM connectors and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want..
  • It can be used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, Outdoor advertising signs, Christmas or wedding party decoration, and so on..
Check Stock

U-verse Tv Point Anywhere Rf Remote Control Kit A20-rf1 for At&t Cac300 Cac302

  • 【RF vs IR】RF Radio frequency remote can work through wall or other obstacle with range of about 50 feet, but IR remote can not work through any obstacle..
  • 【44 Key Remote】Easy for you to choose static colors, adjust brightness, turn On/Off, control modes: Flash, Strobe, Fade, RGB Smooth-change, Static..
  • 【Timer Function】If you press button 1H,2H,3H, the light will automatically turn off in 1H,2 H,3H..
  • 【4-pin Connector】Compatible with SMD 5050, SMD 3528, SMD 2835 RGB LED Strip lights with 4-pin connector..
  • 【2-Ports Connector】(Package comes with 1pcs x 2-Ports remote controller) You can connect 1 or 2 rolls of led strips as you like. One remote can control 2 rolls of strips at the same time..
Check Stock

Motorcycle LED Light Kit Strips 18 RGB Colors Motorcycle Lights Atmosphere Lights Bar Multi-Color Ground Effect Light with Dual IR/RF Remote Controller-12Pcs

  • There are 12pcs motorcycle multi-color RGB remote flexible strip lights kit in the package (including 4 x 3.94" 6 LED strip + 4 x 7.87" 12 LED strip +....
  • Flexible RGB LED strip light kit, can easily be bent or curved to enable storage convenience, instant to install as desire with pre-installed 3M....
  • 12pcs motorcycle led light kit comes with 2 wireless remote with voice control. Motorcycle light will beats with the rhythm. RGB 5050 SMD LED, It can....
  • Each strip is backed with super stick tape for easy mounting. Can easily be bent or curved to desired position. Pre-installed Adhesive Tape on Strips....
  • Different sizes fit for different place on your motorcycle, strips can also be cut to size. With waterproof function, can be used in rainy days. If....
Check Stock

RGBZONE 2 Pack 3M 9.9ft Extension Cable Connect Female Plug to RGB LED Strip Light with Free 4pcs 4pin Connector

  • Length:3M , 2pcs extension cable with 4pcs 4pin connector free.
  • Extension Connecting Cable for 5050 3528 SMD RGB LED Strip Lights.
  • A perfect solution for connecting led strip with controller or strip to strip connection.
  • 4 pin quality cable wire,bended and notated.
  • No need welding,no need soldering,easy to use.
Check Stock

Fntek 10Packs 4-Pin RGB LED Light Strip Connectors 10mm Unwired Gapless Solderless LED Tape Light Adapter Terminal Extension Connectors for SMD 5050 Multicolor LED Strip (10 Pcs 4PIN RGB Connector)

  • Application: Suitable for all 10mm wide (0.39 in) 4-pin SMD 5050 RGB flexible LED strips, making solderless and gapless connections for waterproof and non-waterproof LED light strips. Ideal for extending the LED strip and straight connection.
  • Easy to Use: Quick shunt connection and solderless snap down. Open the wire clamp. With a little effort, it will open quickly. Insert the 10mm LED strip into the clips under the two contact feet, making sure that the”+” and “-” correctly.
  • Fireproof Material: Fntek LED connectors are made from PBT material, which is heat resistant. 72W max wattage, which can be used for low wattage and high wattage light strips.
  • Note: Make sure you put the led strip under the pins and not on top. Please peel off silicon on the surface around soldering area when installing waterproof LED strips. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side.
  • Package: 10X 4 pin connectors for 10mm SMD5050 LED strip lights. If you have any questions, inquiries or need assistance, please feel free to contact us.
Check Stock

4 Pins Black RGB LED Splitter Cable LED Strip Connector 6 Way Splitter Y Splitter for One to six RGB 5050 3528 LED Light Strips with,1m RGB Wire，10x Male 4 Pin Plugs

  • APPLICATION:Perfect for extending or connecting your SMD5050 3528 4 Pin RGB LED Strip Lights in your preferred locations..
  • PACKAGE INCLUDES: 1*5M/16.4ft RGB extension Wire,1*3M/9.8ft RGB extension wire, 2* 1 to 2 LED Strip Splitter 4 Pin, 20*Male Plug 4 Pin Connectors..
  • 4 PIN LED STRIP WIRE GAUGE:22awg ,Carrying voltage: 0-48V, Carrying current: 0-2A, Working temperature: -20 degrees Celsius - +110 degrees Celsius..
  • QUICK CONNECTION:Comes with 20pcs 4pin male plug. No soldering is needed, just plug to connect, easy to install and storage..
Check Stock

5050 4 Pin RGB LED Strip Connector Kit Includes RGB Extension Cable, LED Strip Jumper, 2 Way RGB Splitter Cable, L Connectors, T Connector, Gapless Connectors, 4 Pin Male Connector, LED Strip Clips

  • LED strip connector kit: the package includes 5 pieces female connector wire cables, 5 pieces LED connector cables, 10 piece fixing clips, 10 pieces screws, 10 pieces black male to male connectors, 10 pieces white male to male connectors, extension cable in 3.3 feet and 6.6 feet, 1 piece of 2 way splitter, 20 pieces solderless gapless connectors, 4 pieces L-shaped connectors and 4 pieces T-shaped connectors, which can meet your DIY need.
  • Compatible with: the LED connector kit fits the 0.39 inches/ 10 mm SMD 5050 RGB LED strips, compatible with waterproof and non-waterproof strips.
  • For waterproof LED strips, please strip off the silicon on the surface around the welding area.
  • Enjoy the fun of light strip: with these various LED connector adapters, you can easily set up your LED light bar and customize it.
  • Use a solderless 4-pin connector to connect a separate light strip, or use a corner connector to connect the corner of the house and table, the wall or the ceiling, etc..
  • Easy to install: 5050 4 pin RGB LED light bar connector kit can be plugged and played, easy to install, no tools and soldering are required.
  • Widely applied: light strip connector can be applied for the connection between 2 light strips, the connection between the light strip and the con....
Check Stock

TronicsPros 2pcs 4 Pin LED Splitter Cable RGB Splitter LED Strip Connector LED Tape Splitter LED Ribbon Connector 2 Way Y Splitter 1 to 2 Splitter Cable for RGB 5050 3528 2835 LED Band 30cm/12

  • 4 pin LED splitter cable for SMD 5050/3528/2835 RGB LED strip lights (with 4 pin or 4 copper contacts at every cutting line on the LED strip). Not for....
  • This DC Power Adapter Cable splits 1 power signal into 2, enables you to connect 2 color changing RGB LED strips to a single controller.
  • Power supply with sufficient amperage for 2 LED strips is required.
  • High quality cable and connectors with refined materials..
  • Package Content: 2x RGB LED Strip Splitter Cable.
Check Stock