Top Smooth Shank Lag Bolts

Century Drill & Tool 68700 Eye Lag Driver 1/4 Hex

  • Hardened steel body for professional Acoustic ceiling installs.
  • Easily drives eye lag screws into wood or metal with any drill or screw gun.
  • Compatible with all wood and self-tapping eye lag screws.
Check Stock

REDCAMP Indoor Hammock Hanging Kit Heavy Duty 304 Stainless Steel Hammock Wall Mount Kit 800 lb Capacity

  • EXPANSION SCREWS: This hammock hanging kit contains 2 expansion bolts and 2 lag screws. Expansion bolts are the best choice for concrete wall, lag....
  • HEAVY DUTY HAMMOCK HANGING HOOKS: the screws and washers are exceedingly heavy and thick, made out of 304 stainless steel and galvanized, support up....
  • PERFECT FOR BOTH INDOOR AND OUTDOOR USE: this set of high quality hammock hooks and carabiners can be adjusted to the ceiling of your garage or room,....
  • EASY AND FAST SET UP: This hammock holder is really easy to install, a spanner and a drill will be completely enough..
  • REDCAMP GUARANTEE: Your 100% satisfaction has always been our top priority. That is why all of our products are backed by our unconditional 365-day....
Check Stock

ABN Bolt Deburring Tool - 0.5 to 1.4in Deburring Bit Chamfer Tool Drill Attachment for Steel, Copper, Brass, and Wood

  • [Finish Your Projects]: Smooth out edges and other imperfections on your projects or crafts with the ABN 0.5 to 1.4-Inch Deburring Chamfer Tool.
  • Create smooth, beveled edges on your art, home, or vehicle projects with stainless steel deburring tool.
  • [Perfect Cut Every Time]: Deburr chamfer bit repairs damaged bolts and fasteners to get the most uses.
  • Deburring repair tool cuts rough edges off fresh-cut pipes and bolts to create a beveled edge.
  • [Designed for Different Materials]: Metal and PVC deburring tool can be used on stainless steel, hardened steel, mild steel, copper, brass, aluminum, fiberglass, wood, and plastic.
  • Use copper deburring tool on round bars, nuts, bolts or rebar 0.5 to 1.4-inch (13 to 36mm) in diameter.
  • [Fits Your Tools]: 3/4-inch hex shank on external deburring drill bit fits your 0-150 RPM (revolutions per minute) drills.
  • Threaded rod deburring tool should not be used with impact drivers.
  • [Built to Last]: Bolt rounding tool is made of high-speed steel which displays hardness and helps prevent abrasion.
  • Deburring chamfering tool measures 2.4-inch (6.1cm) long with a diameter of 1.8-inch (4.6cm).
Check Stock

1PCS Deburring External Chamfer Tool, 1/2'to 1 2/5' (13mm-36mm) Bolt Deburring Tool Stainless Steel Remove Burr Tools HSS Blade Deburring Quickly Repairs Tool for Steel, Copper, Brass, Wood

  • 【Steel Material】The handle material of the deburring tool is chrome vanadium steel, the shell is zinc alloy, and the alloy cutter head, high hardness and durable, It has safe and efficient cutting capabilities, suitable for Hexagon Shank External Chamfer.
  • 【Fits Your Tools】 Deburring Quickly Repairs tool Fits for 1/2"to 1 2/5" (13mm-36mm)，3/4-inch hex shank on external deburring drill bit fits your 0-400 RPM drills.
  • Before using the Deburring tool, use oil to improve the tool performance.
  • 【Efficiently Safety Design】The hexl shank deburring tool can be tightly connected with the head drill, and it has sharp teeth inside, which can cut bolts safely and effectively, quickly repair damaged bolts and tighten nuts in place, without hurting hands and producing no sparks.
  • 【Operation simply】You can attach a deburring external chamfering tool to the end of a power drill and apply light pressure at the lowest speed to remove the burrs. You don't need to look for replacement bolts, deburring tools repair damaged bolts and improve work efficiency, A good helper for home tools and factories.
  • 【Widely Application】Deburring tools have strong cutting and repairing capabilities and are very effective in deburring, Deburring External Chamfer Tool effecti....
Check Stock

DPAccessories 20 Black 14x1.5B Spline Tuner Lug Bolts for Aftermarket Wheels - 27mm Shank BS27K5HE-BK04020

  • FITS: Aftermarket wheels requiring a lug bolt with a conical 60 degree seat, 27mm shank, and small diameter like spline drive or tuner style bolts..
  • WILL NOT FIT: Factory OEM wheels or wheels made by the vehicle manufacturer..
  • SPECS: M14x1.50B thread - Spline Tuner Style Lug Bolts - Conical 60 Degree Seat - 53.34mm long - 20.07mm wide - 27mm shank length.
  • REQUIRES: 17mm and 19mm hex spline tool/key part # BS-K-HC-CH04001 for installation and removal. One (1) tool included with this set..
  • INCLUDES: 20 Black Spline Tuner Lug Bolts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..
Check Stock

Venzo Bike Bicycle Bench Mount Clamp Repair Rack Stand Work Stand - Bike Maintenance

  • BENCH MOUNT: Bike repair stand mounted on a bench is more stable than portable and foldable repair stand. It can handle harsh bike mechanic or....
  • FULL METAL: The workstand is made of heavy duty steel except rubber protection coating. No more broken parts! With it's 360 degree turning and side....
  • MOUNTING HOLES: Mounting flange has four predrilled holes, allowing use of bolts or lag bolts to mount ( Mounting bolts not included )..
  • DURABLE: We understand what kind of workstand riders need. The quick release & bolts are both heat treated and approved not to be stripped anytime.....
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty ! Made in Taiwan..
Check Stock

Titan Attachments Hitch Mounted Ripper V2 CAT 0 and CAT 1 Trenching Soil

  • Shear bolts on the shank protect your hitch, shank, and machine..
  • Recommended for use with CAT 0 and CAT 1 tractors..
Check Stock

LaBear 3/8\ Drive to 1/4\ Hex Drive Quick Change Impact Adapter (3/8\DR to 1/4\H)

  • Fits: 1/2” Lag bolts (Hard Heads), 5/8”, 3/4”, & 1/2” square headed bolts and nuts.
  • Handle Type: Non-conductive and Lightweight.
Check Stock

#17 x 6 Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count

  • Screw Dimensions - ~5/16" Thread Diameter - 11/16" Head Diameter - Length 6".
  • Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible.
  • Corrosion Resistant Lag Screws Passed the 1200 Hour Salt Spray Test Without Coating Failures.
  • Type 17 Notched Extra Sharp Point for Quick Starts without "Walking", Reduces Need for Pre-Drilling.
  • Construction Lag Screws Far Exceed Standard Lag Bolts in Sear Compression Forces.
Check Stock

Impact Grade Socket Wrench Adapter Extension Set Turns Power Drill Into High Speed Nut Driver,1/4-Inch Hex Shank to Drive for Adapters to Use with Drill Chucks,Sizes 1/4' 3/8' 1/2',Cr-V,Black,3-Piece

  • ☞ PACKAGE CONTAINS:3Pcs - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket wrench adapter set .1/4" 3/8" 1/2" Turns any power drill into a power nut driver Sturdy spring-loaded ball bearing holds sockets securely in place Sockets Snap-On Tightly and Won't Slip Off.
  • ☞USES: Attach these Versatile Extender Bars to any Powered/Cordless Drill Chuck or Impact Driver to turn it into a High-Speed Nut Driver – Useful for Automotive Mechanic Vehicle Repairs, Technicians, Handyman & Hobbyist Developments to use with sockets on Hardware/Tire Nuts, Lag Bolts, Hex Head Cap Screws at Home, Workshop Factory or Construction Site.
  • ☞Multifunction: 3Pcs1/4 3/8 1/2" Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set.
  • ☞Durability: Quality is a guarantee with this 3 piece sturdy and durable solid steel set designed to withstand torque compression under most ....
Check Stock

Impact Grade Socket Adapter/Extension Set Turns Power Drill Into High Speed Nut Driver,1/4-Inch Hex Shank to Drive for Adapters to Use with Drill Chucks, Sizes 1/4\ 3/8\ 1/2\

  • ☞ PACKAGE CONTAINS:3Pcs - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket wrench adapter set .1/4" 3/8" 1/2" Turns any power drill into a power nut driver Sturdy spring-loaded ball bearing holds sockets securely in place Sockets Snap-On Tightly and Won't Slip Off..
  • ☞USES: Attach these Versatile Extender Bars to any Powered/Cordless Drill Chuck or Impact Driver to turn it into a High-Speed Nut Driver – Useful for Automotive Mechanic Vehicle Repairs, Technicians, Handyman & Hobbyist Developments to use with sockets on Hardware/Tire Nuts, Lag Bolts, Hex Head Cap Screws at Home, Workshop Factory or Construction Site..
  • ☞Multifunction: used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion.Provides versatility and convenience no matter which tool you chose to use. Great for the DIY, household maintenance, and most general repairs, not for industrial work. A great tool addition to any tool box set..
  • ☞Durability: Quality is a guarantee with this 3 piece sturdy and durable solid steel set designed to withstand torque compression under most standard use ....
Check Stock

Kanto PX720 Articulating Full Motion TV Wall Mount for 42-inch to 100-inch TVs | Black

  • FULL MOTION DESIGN - Heavy-duty articulating arms allow you to safely extend your TV 31" from the wall and swivel it up to 90° in either direction, depending on screen size. Maintain a perfect viewing angle wherever you’re seated..
  • TOOLLESS TILT - An easy-to-use, toolless tilt mechanism allows you to angle your TV up to 15° forward or 3° backward in order to reduce glare and improve line-of-sight when mounting above eye-level. The tilt head can be tensioned to allow for on-the-fly adjustments or to lock your TV in place at the desired angle..
  • HASSLE-FREE INSTALLATION - Use the provided drill template to accurately mount your TV to brick, concrete or wood studs up to 24" apart. A carefully organized hardware box is also included with all the lag bolts, anchors, washers and spacers you’ll need for a custom fit installation..
  • SAFETY FIRST - The PX720's high-grade steel construction and heavy-duty lag bolts safely support 150 lb., even at full extension. Mount up to a 100" TV without hesitation..
  • CLEAN SETUP - In addition to providing a low-profile solution for displaying your TV, the PX720 comes with wall plate covers and cable management raceways to ensure your viewing area remains tidy..
Check Stock