Top Socket Weld Ball Valve

Northern Brewer - Megapot 1.2 Stainless Steel Brew Kettle with Volume Markings (30 Gallon w/Valve)

• 30 gallons (120 quarts / 113.5 liters) capacity.
• Stainless Steel Construction with Tri-Clad bottom.
• Weld-less Ball Valve for liquid transfer. Now features our IsoFlow Single Piece Bulkhead fittings!.
• Graduated Volume Markings inside the kettle.
• 19.7 inches in diameter and 23.2 inches in height.

Northern Brewer - Megapot 1.2 Stainless Steel Brew Kettle with Volume Markings (30 Gallon w/Valve and Thermometer)

• 30 gallons (120 quarts / 113.5 liters) capacity.
• Stainless Steel Construction with Tri-Clad bottom.
• Graduated Volume Markings inside the kettle.
• Weld-less ball valve and thermometer. Now features our IsoFlow Single Piece Bulkhead fittings!.
• 19.7 inches in diameter and 23.2 inches in height.

Northern Brewer - MegaPot Stainless Steel Brew Kettle with Volume Markings 8 Gallon w/Valve

• Crafted of stainless steel for ease of cleaning.
• Weld-less Ball Valve for easy liquid transfer. Now features our IsoFlow Single Piece Bulkhead fittings!.
• Handles are riveted in place to aid in lifting a hot liquid-filled pot.
• Stay cool silicone handles on the kettle and lid serve to limit scorching.
• Graduated gallon-markers inside the kettle.

EZ-FLO 95082 Tri-Check Pvc Check Valve

• Price For: Each Flow: Full Flow Compliance: - Mounting Position: Vertical or Horizontal Item: Check Valve with Ball Valve and Union Material of Construction: PVC Size: 2" Length: 11-1/2" Max. Temp.: 130 Degrees F Connection Type: Socket Sub-Category: PVC Seal Material: Neoprene Gasket and Flapper Overall Height: 13" Width: 9-1/2".
• Country of Origin (subject to change): United States.

Reed Tool HWB Cast Ductile Hydrant Wrench

• Shower Valve Socket Wrench Set: The Set comes with five double end wrenches, bar handle and a bar wire holder for easy storage. The hex-shaped bodies allow for use with an adjustable wrench. There is also a hole near each end of the wrench for turning with a long screwdriver..
• Common Size: This shower valve socket set has 5 pieces of socket with bar handle. Each 125 mm socket has been designed with different sizes helping in quick and easy wrench selection. The socket sizes are 21/32”x 27/32”, 29/32”x 31/32”, 1-1/32” x1-3/32”, 1-5/32”x1-9/32”, 1-11/32”x 1-7/16". The diameter of handle is 9mm..
• Durable Steel Construction: Made of long lasting durable solid steel and the surface is nickel-plated. 5pcs socket set and afterburner rod are connected with a stainless steel wire..
• Easy To Use: First, Turn off water supply. Next, Remove faucet handle cap, screw and handle, exposes valve stem and its packing nut. And then, Place correct and of wrench over valve stem onto packing nut, insert handle into opposite side of wrench. At last, Turn clockwise to tighten nut..
• Which You Need: These plumbing socket wrench set is perfect for removing and installing tub and shower valves, fittings and nuts..

2 inch Caster Wheels (casters Set of 4) 5/16 inch Valve stem and Rotating top Plate Installation Options,Heavy Duty casters Total Load Capacity 1000LBS, Replaceable Wheels for Furniture(Black)

• ...-bearing capacity. The surface of the tire has a polyurethane rubber coating, which can effectively protect the floor from scratches and leaving marks..
• ✔️ 【Wide application】Note: The exposed valve stem size of the heavy duty caster wheels is (5/16"), Not recommended as replacement chair casters unless chair socket is 5/16” diameter.The scope of application of industrial casters includes but is not limited to: shelves, shopping baskets, cribs, toddlers Ideal stem casters for cars, furniture, racks, file cabinets, tables, hangers, filing cabinets, machinery, etc..
• ✔️ 【Simple installation】Select a valve stem you need, press it into the swivel casters and make sure it is stable, and insert it into the equipment to be installed to complete the installation. Of course, you can also replace the screw valve stem prepared by yourself and install it according to the above steps. Believe me, this will not waste a lot of your time, it only takes you 5 minutes..
• ✔️ 【Products included】You will receive 4X caster wheel, (Includes hardware for two attachment options: 4 x 5/16" diameter stems with 4 x 3/8" grip neck sleeves and 4 x 1-1/2" by 1-1/2" swivel top plate stem with 16 screws for mounting)Important: If you encounter problems during ins....

uxcell Ball Valve 1-1/2 Slip PVC Socket End Valve T-Handle Water Shut-Off Valve for Irrigation and Water Treatment Dark Gray Red

• [Size] - 1-1/2" Slip, 50mm inner diameter PVC Ball Valve..
• [Material] - Made of PVC material, acid and alkali resistant, corrosion resistant, never rust..
• [Feature] - The valve ensure the smooth flow of water and reduce water flow resistance, leak-proof..
• [Installation] The valve needs to use glue on the socket joint wall with the pipe and stick them together..
• [Applicaitions] - Widely used in irrigation, swimming pool, commercial plumbing, aquariums, reef tank, civil construction and other industries..

American Valve P200S 1 1/2\ PVC Ball Valve Socket Schedule 40, 1-1/2-Inch

American Valve P200S 1 Ball Valve, 1-Inch

Electronic Amplifier, 6J1 Tube Valve Amplifier Tube Amplifier 6J1 Vacuum Electron Tube Valve Preamp Amplifier Board Amplifier Electronic Diy Kit 6J1 Tube Preamp

• 【Definition】 A valve amplifier or tube amplifier is a type of electronic amplifier that uses vacuum tubes to increase the amplitude or power of a signal..
• 【Function】 Connect this preamplifier to the audio source with 6J1 tubes and effectively filter the digital flavor. Tube amplifiers produce a warmer or more natural valve sound, make music and the human voice is relatively good..
• 【Capacitor Filter / Coupling Capacitor】 Eight 470UF capacitor filters are very clean, excellent power supply does not cause humming, filaments are supplied with 12 V DC and must be connected in series to reduce noise. The coupling capacitor is a high frequency electrodeless electrolytic capacitor and low resistance..
• 【Features】 With the DC 5.5 * 2.1 socket and 12V AC transformer, you can also use a 12V AC transformer without a plug. All you have to do is weld the power cord to the circuit board.This kit is available in parts so you can assemble it yourself and build your own tube amp..
• 【Customer Service】 Thincol has always strived to provide customers with high quality products and outstanding customer service. If you encounter problems during the purchase or during use, would you contact us? then we will do our best to serve you and protect your interests..

600A Arcair Carbon Arc Gouging Torch Arc Welding Equipment Welding Accessories Heavy Duty Industrial Grade Torch with Cables Grooves Machining Tool

• 【PRINCIPLE OF ACTION】The carbon arc gouging is a method of surface grooves machining which adopts carbon rods or graphite rods as electrodes to generate arcs with the workpiece and melt the metal, finally blowing the molten metal off with compressed air.
• 【TURN AT ANY ANGLE】The gun head can be rotated at any angle, suitable for various specifications of carbon rods.The product can operate in any position with great flexiblity.It has good accessibility, it’s easy and convenient to operate.
• 【ROTATABLE TAIL】The tail air pipe and the adapter can be rotated, which is convenient for application and simpler operation.High-quality cable hose provides high heat resistance and abrasion resistance.
• 【ONE-KEY VALVE DESIGN】One-button air valve is designed in the middle of the handle, which is easier to operate with the handle.It’s mainly used to dig the groove, clear weld defects, and remove weld root.
• 【HIGH ACCURACY】When clearing weld defects, the shape and depth of the flaw can be clearly observed under the arc.It’s high in precision and efficiency.It can reducing the labor intensity.

Tool Daily Pressure Washer Adapter Set, Quick Connect Kit, 3/8 Inch Male Thread Fitting, 5000 PSI

• 3/8’’ quick coupler plug + 3/8’’ male thread.
• 3/8’’ quick coupler socket + 3/8’’ male thread..
• Standard quick connector set makes a quick connection for hose, pump, ball valve, telescoping wand, surface cleaner and spray gun..
• Working pressure is up to 5000 PSI. Material: brass..
• SATISFACTION GUARANTEED: Our team of professionals is constantly working to make you more efficient and safer to clean. We are confident in the quality of our product and give you 2 YEARS WARRANTY and quick reply within 10 hours. Click “BUY IT NOW” and ENJOY QUALITY OF TOOL DAILY..
• Ball lock design creates a solid connection..