Top Socket Welded Pipe Fitting

Ultimate Washer 18709 3/8-Inch Stainless Steel Quick Connect Pressure Washer Adapter Set, Max Pressure 5000 PSI Rating

  • STAINLESS STEEL 3/8” Female Pipe Thread x 3/8” Female Quick Connect Plug.
  • STAINLESS STEEL 3/8” Female Pipe Thread x 3/8” Female Quick Connect Socket.
  • Withstands MAXIMUM PRESSURE up to 5000 PSI.
  • UNIVERSAL Fitting for most Gas Power Washers.
Check Stock

CIRCOPACK Screw Tab Caps for Schedule 40 PVC Pipes Furniture Grade (2 pieces) (1-1/2 inch)

  • Three tabs with screw holes come out from the caps. These are strong when pulling straight out from the attached surface but they are weaker when side to side pressure is applied..
  • Some people use them for mounting a small table to the end of PVC pipe..
  • The Screw Tab Cap or table cap PVC fitting is useful any place you want to secure pipe to a surface..
  • The outlet is a non-threaded socket and is compatible with furniture grade PVC pipe or standard PVC pipe from a hardware store..
  • This is a CIRCOPACK value bundle comprising 2 pieces of Screw Tab Caps for use with 1-1/2 inch Standard PVC (Schedule 40). Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product..
Check Stock

Floor Flange Trim Plate, Steel, 3/4 In

  • Price For: Each Inside Dia.: 3/4" Max. Pressure: 150 psi Pipe Type: Pipe Nipple Pipe Size (Nominal): 1/2" Seamless/Welded: Welded Outside Dia.: 3/4" Pipe Schedule: 40 Wall Thickness: 1/16" Temp. Range: -60 Degrees to 450 Degrees F Overall Pipe Length: 4" Pipe Connection Type: Threaded on Both Ends Standards: ASTM A 312 Item: Nipple.
  • Country of Origin (subject to change): China.
Check Stock

Supply Giant 3942x10 Flexible Pvc Pipe Cap with Stainless Steel Clamps, 2 Inch Black (pack of 10), 2'

  • This is a CIRCOPACK value bundle comprising 2 pieces of Screw Tab Caps for use with 2 inch Standard PVC (Schedule 40). Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product..
  • The Screw Tab Cap or table cap PVC fitting is useful any place you want to secure pipe to a surface..
  • Three tabs with screw holes come out from the caps. These are strong when pulling straight out from the attached surface but they are weaker when side to side pressure is applied..
  • Some people use them for mounting a small table to the end of PVC pipe..
  • The outlet is a non-threaded socket and is compatible with furniture grade PVC pipe or standard PVC pipe from a hardware store..
Check Stock

Golden Valley Tools & Tarps 8pc 3/4' 3 Way Flat Corner Canopy Fitting/Batting CAGE Fitting (F3A) - Fits 3/4' EMT Pipe That has an Outer Diameter of 15/16'

  • Heavy Duty Fitting (Galvanized Steel) with Welded Connections and Tightening Eyebolt(s).
  • Our 3/4” fittings have an inner diameter of 1”. Which works with 3/4” EMT pipe that has an outer diameter of 15/16”. This pipe is available at most hardware stores.
Check Stock

Oatey 43789 3 in x 2 in Solvent Weld White PVC Saddle Tee Kit

  • Saddle is solvent welded into existing line and secured with fixture components.
  • Includes necessary metal V-bolts, washers, and nuts for secure attachment.
  • For tapping into 3 in. or 4 in. Schedule 40 DWV line.
  • Accepts incoming line inside the socket or joins with a Sch. 40 DWV fitting.
Check Stock

Hayward BFA1040SES Series BFA Standard Flange Bulkhead Fitting, Socket x Socket End, PVC with EPDM Seals, 4" Size

  • Bulkhead fitting to connect two tubes or pipes through a panel.
  • Socket ends for connecting to a male pipe or fitting.
  • CPVC for better resistance to high pressures, corrosion, and temperatures than PVC, and an EPDM gasket for resistance to weathering, ozone, UV, electricity, oils, water, steam and some solvents.
  • Withstands temperatures from 40 to 190 degrees F.
Check Stock

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

  • TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
  • MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
  • WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
  • EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
  • MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.
Check Stock

ANPTGHT 3/4“ Tee PVC Fitting 3 Way Elbow Connector, Furniture Grade 90 Degree Elbow Side Outlet, PVC Corner Fittings for Building Furniture Greenhouse Shed Pipe Fittings Tent Connection（Pack of 8）

  • Material-Made of furniture-grade high-quality PVC material with a high-gloss finish. It will not change color, crack or degrade after years of use. Suitable for DIY construction.
  • Installation-Side-out elbows can connect at a 90-degree angle to each socket.
  • The extra deep sleeve allows the pipe to be inserted further into the joint for a safer and more secure hold.
  • Design-This PVC fitting connector has glossy surface and tapered edges.
  • Application- for building any type of structure out of PVC pipe, such as cat enclosure, shelves, pool products, chairs, desks, puppy play cube or puppy gym, garden supports structures and so on.
Check Stock

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Check Stock

uxcell Stainless Steel Compression Tube Fitting 1/2 NPT Male x 1/2\ Tube OD

  • 【1/2 NPT MALE x Ф1/2 TUBE OD】Tube OD : 12mm(1/2").
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation.
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing, convenient installation and maintenance, safe and reliable operation.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.
Check Stock

Ultimate Washer UW16-PWD3C8 Female Quick Coupler by Male Threads, 1/4-Inch, 4000 PSI Rated

  • Brass 1/4-Inch Female Coupler Fitting x 1/4-Inch Male Pipe Thread.
  • Used Anywhere High Pressure Connections are Frequently Assembled and Disassembled.
  • Solid Grip on the Socket Sleeve Allows for Easy Use.
  • The Ball Lock Design Insures a Tight Seal Connection Every Time.
Check Stock