Top Solder Bit

uxcell Weld Nuts,M10 x 1.25 Tab Base UNC Carbon Steel Machine Screw 4 Projection Silver 10Pcs

  • Specification: Thread Size: M10 x 1.25mm.
  • Application: Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
  • Steps: First clean the welding surface, using sandpaper or steel brush to remove the joint oxide.Second welding a little bit and adjust the verticality of the thread .Finally solder all the solder joints..
  • Package Content: 10 Pcs x Square Weld Nut.
  • Advantages: Flat solder joints, steel ,good weldability, thread size accuracy..
Check Stock

5 PCS WELLER SP40L SP40N WP25 WP30 WP35 WLC100 ST Replace Soldering Tips Solder Iron Handle Tip Brand ACE

  • WELLER SP40L SP40N WP25 WP30 WP35 WLC100 ST Replace Soldering Tips.
  • Lead Free Solder Iron Tips,Handle Tip,Solder Bit,Pencil Tip,Solder Station Iron Handle Tip.
  • ST-I,D12,D16,D24,D32 (ST Series Replace Soldering Tip) (the base is 6mm diameter).
  • 1 Piece of Sharpe Conical, 4 Pieces of Screwdriver (Chisel) from Small Size to Larger Size.
  • High Quality with Long Life Time Soldering Tips and Rapid Temperature Recovery.
Check Stock

TBBSC Desoldering Pump Solder Sucker Vacuum Solder Removal Tool

  • Anti-static with replaceable nylon tip and durable aluminum housing..
  • Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily..
  • Good little solder sucker,have a good bit of suction,you can just hang onto it and use your thumb to reset and suck..
  • Back pull pattern for the inner spring instantaneous suction is strong..
  • Ideal for use in labs, service shops, schools (STEM - steam), home and industry..
Check Stock

uxcell Round Weld Nuts, M10 x 14mm x 13mm Weld On Bung Female Nut Threaded - 201 Stainless Steel Insert Weldable 4pcs

  • 【HIGH QUALITY】-All the weld nuts are made of high quality carbon steel, have high hardness, perfect wear and rust resistance, smooth surface without burr..
  • 【ADVANTAGE】-Flat solder joints, high-quality steel ,good weld ability, thread size accuracy..
  • 【SIMPLE TO USE】-First, clean the welding surface, using sandpaper or steel brush to remove the joint oxide.
  • Second, welding a little bit and adjust the verticality of the thread.
  • 【MULTI APPLICATION】-Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
Check Stock

M12 Soldering Iron (Bare Tool)

  • HAKKO 900M Replacement Soldering tip, solder iron tip, Handle Tip, Solder Bit, Pencil Tip (Not HAKKO maker but brand " AiCE Tls).
  • Conical, Screwdriver, Round, Bevel, Bent, Chisel, Knife shapes helps when soldering on different projects.
  • We only produce good quality tips, temperature recovery fast, not easily oxidized, we will full payment refund if you are not satisfied even after use..
  • Compatable Stations & Irons: HAKKO 936 937 907,888D,FX-600,Milwaukee M12SI-D Radio Shack 64-053,Atten,Quick,Aoyue 469,YiHUA-936/936B,Vastar,Sywon,Tabiger,SOAIY,x-tropics 3020/3020-XTS, Baku 909 rework station ,878AD,zany 853d (check sizes before order).
Check Stock

ST-J Bent Conical Round 0.008' / 0.2mm Soldering Tip for WLC100 WP25 WP30 WP35 SP40L SP40N SPG40 Solder Iron Tip (5)

  • ST-J Bent Conical Round 0.008" / 0.2mm Soldering Tip for WLC100 WP25 WP30 WP35 SP40L SP40N SPG40 Solder Iron Tip.
  • WELLER ST Replacement High Quality Soldering Tip Solder Iron Tips Handle Tip Solder Bit Pencil Tip Welding Handpiece Nozzle Head Needle Tip.
  • Compatible Stations / Irons: WLC100 WP25 WP30 WP35 SP40L SP40N SPG40 SP40NUK SP40NUS.
  • Pre-tinned Durable Tips for Small Precise Soldering Points 0603 SMD Components SMT.
  • We Only Produce High Quality Tips (Durable Long Life Using Time Pre-tinned Lead Free Rapid Temperature Recovery Hold Temperature Stable).
Check Stock

15 PCS WELLER ST Replace Soldering Tips use for WELLER SP40L SP40N WP25 WP30 WP35 WLC100 Solder Iron Handle Tip Brand ACE

  • WELLER ST Series Replace Soldering Tips Lead Free Solder Iron Tips, Handle Tip, Solder Bit, Pencil Tip.
  • WELLER SP40L,SP40N,WP25,WP30,WP35,WLC100 Solder Station Iron Handle Tip (the base is 6mm diameter).
  • ST-D08,D12,D16,D24,D32,D42,B,I,SK,K,J,C1,C2,C3,C4,C5 (Replace ST1/ST2/ST3/ST4/ST5/ST6/ST7/ST8).
  • High Quality with Long Life Time Soldering Tips and Rapid Temperature Recovery.
  • Conical, Screwdriver, Round, Bevel, Bent, Chisel, Knife shapes helps when soldering on different projects, No Matter for precision electronics but....
Check Stock

Milwaukee M12 Soldering Iron Kit

  • HAKKO 900M Replacement Soldering tip, solder iron tip, Handle Tip, Solder Bit, Pencil Tip (Not HAKKO maker but brand " AiCE Tls).
  • Conical, Screwdriver, Round, Bevel, Bent, Chisel, Knife shapes helps when soldering on different projects.
  • We only produce good quality tips, temperature recovery fast, not easily oxidized, we will full payment refund if you are not satisfied even after use..
  • 900M-T-B,I,J,K,1.5C,0.8D,1.2D,1.6D,2D,2.4D,2.8D,3.2D.
  • Compatable Stations & Irons: HAKKO 936 937 907,888D,FX-600,Milwaukee M12SI-D Radio Shack 64-053,Atten,Quick,Aoyue 469,YiHUA-936/936B,Vastar,Sywon,Tabiger,SOAIY,x-tropics 3020/3020-XTS, Baku 909 rework station ,878AD,zany 853d (check sizes before order).
Check Stock

RedLine Tools - #53 (.0595) Circuit Board Drill Bit (10 Pack), 2 Flute .4200 Flute Length, 1/8 (.1250) Shank Diameter - RMD0595

  • Material: Cemented carbide, high speed stee. Fine grinding process makes bit more sharp cutting edge.
  • Drill bit has a large scraps discharge space, little resistance and smoothly during the scraps discharge.
  • Reduce cutting force and broken drill, improve the quality of hole wall.
  • Easy to change out and do a great job cutting through the PCB for solder holes.
  • Come in a great storage container that is easy to grab the drill bit you need when you need it.
Check Stock

KEYESTUDIO Microbit Sensor Breakout Board V2 I2C SPI Micro USB for BBC Micro:bit

  • Particularly design this keyestudio sensor expansion board V2 for micro:bit. breaks out all the PIO ports on the micro:bit control board into 3PIN interface (GND, VCC, Signal), easy to connect it with other sensor modules..
  • Extending some commonly-used serial communication interfaces into pin or female headers with 2.54mm pin pitch, such as I2C and SPI communication pins.Allows communication between micro:bit control board and other communication devices..
  • Two kinds method to power the micro:bit board, through a black DC jack (DC 7-9V) or a mciro USB port (DC 5V) on the shield..
  • Connection Diagram, Sample Code, Using Method and Resources are provided in our wiki page. Technical support is available via email or message..
  • Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..
Check Stock

10 Pcs PCB Drill Bit Set,Carbide Micro Drill Bits for Print Circuit Board Rework/Repair 9 Size 0.1MM to 1.4MM,1/8\ Round Shank(0.7mm)

  • Material: Cemented carbide, high speed stee. Fine grinding process makes bit more sharp cutting edge.
  • Drill bit has a large scraps discharge space, little resistance and smoothly during the scraps discharge.
  • Reduce cutting force and broken drill, improve the quality of hole wall.
  • Easy to change out and do a great job cutting through the PCB for solder holes.
  • Come in a great storage container that is easy to grab the drill bit you need when you need it.
Check Stock

Adafruit Power Relay FeatherWing [ADA3191]

  • High speed SPI display with digital I2C touchscreen driver.
  • Single-touch capacitive touch bonded on top.
  • 240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
  • We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
  • Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
  • Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
  • That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.
Check Stock