Top Solder Fume Extractor 2

Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station..
  • It adopt the high performance fan with low noise, and the suction is strongThe structure is simple. The replacement of the activated carbon filter....
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. Long-lasting working time for over 50,000 hours..
  • Comes with 5 Active carbon filters. The filter is made of special foam with refined activated carbon, which has high suction and flux absorption....
  • It's a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work..
Check Stock

KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering, Electric Iron Welding, 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter [Updated, Hose pre-attached]

  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction..
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs..
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O..
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply)..
  • US-based customer support, 30 days full satisfaction no question asked return period..
Check Stock

GDSTIME 80mm x 38mm 8038 PWM High Speed Dual Ball Bearing DC 12V 80mm Cooling Fan

  • 【RAPID COOLING】80mm high static pressure fan is suitable for 4U server chassis, inverter, GPU heatsink, solder fume extractor, radiators, etc.
  • or as a replacemment fan for many products.
  • 【POWERFUL FAN】High wind pressure design to get more concentrated and farther air flow.
  • suitable in applications where need maximized airflow and a louder noise level is tolerable.
  • 【LONG-LIFE】Dual-ball bearings rated at up to 50,000hrs.
  • Includes a metal fan grill to protect your hands and fan blades.
  • 【PWM FUNCTION】The fan uses 4-pin interface, with speed regulation (blue wire), speed measurement functions (yellow wire).
  • run at full speed if just red and black wires.
  • 【DC AXIAL FAN】80x80x38 mm (3.15x3.15x1.5 in.) | Rated Voltage: 12V DC | Current: 0.8A | Power: 8W | Speed: 5700 RPM | Noise: 50.7dBA | Airflow: 76 CFM | Static Pressure: 0.73 In H2O.
Check Stock

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Third Hand Soldering Tool PCB Holder Four Magnetic Based With Iron Holder Combo

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station 0.4 inch thick activated carbon filter....
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to....
  • 'Third Hand' workshop handyman vice – Ideal for Soldering, Circuit board holder, Assembly, Repair, Modeling, Hobby, Jewelry, Crafts. Four adjustable....
  • Weighted base and Anti-Split rubber feet: Solid weighted steel construction, power coated with industrial grade rubber feet ensures a stable base that....
  • Perfect for various projects – You can use our helping hands for all kinds of jobs, many customers use for hobby projects, electronics, arts and....
Check Stock

6 Inch Exhaust Fan, HG POWER 308CFM Powerful Kitchen Extractor Fan, Stainless Steel Industrial Vent Blower for Outrdoor Indoor Heating Cooling Ventilation - 7.5\x7.5\ Panel

  • KITCHEN FUME BLOWER: With 308CFM strong airflow and 2800r/min high-speed rate, HG POWER 6-inch kitchen exhaust fan is super suitable for exhausting the fume in cooking, prevent your lung from damaged..
  • PREMIUM MATERIAL: The 6" bathroom extractor fan body is made of high-quality stainless steel, with soft plastic edge protection, which is rust-resistant and protects your hands..
  • THICKENED BLADES: The one-piece metal 7 fan blades make the fan air supply more evenly, reduce the noise, and the air volume is larger and gentle..
  • PURE COPPER MOTOR: Adopted pure-copper motor, the vent fan is high-performance and energy-saving, perfect for exhaust smoke, fume, odor in bathrooms, offices, kitchens, and more places..
  • WHAT YOU GET: HG POWER 12-month warranty and 24-hour customer service. If you have any questions, feel free to contact us. We will reply to you as soon as possible..
Check Stock

JFC Nori Fumi Furikake Rice Seasoning 1.7-Ounce Jars Pack of 4

  • Technical Parameter: Voltage: 110V, Efficiency: 99.97%, Power: 80W, Air Volume: 180m³/H, Noise: 58 dBA, Product Size: 37 x 25 x 40 cm/14.56 x 9.8 x....
  • Multi-layer Efficient Filtration: The selected high-quality deodorizing carbons have a better deodorizing effect on the laser-processed plastic....
  • 58 DBA Low Noise: The pure air fume extractor has a built-in noise reduction module with the 58 dBA the lowest volume, which avoids the noise during....
  • User-friendly Detail Design: The well-designed tight buckles distributed on both sides of the smoke air purifier, no smoke & reliable air tightness.....
  • Easy to Install & Disassemble: The cover of the air extractor adopts the detachable design for easy assembly. The instant disassembly and assembly....
Check Stock

RIDGID 97457 VF6000 5-Layer HEPA Replacement Filter for 5-20 Gallon Wet/Dry Vacuums

  • The product is 97457 FILTER, HEPA VF6000.
  • The product use for fume and smoke extractor filters.
Check Stock

YIHUA 862BD+ Professional Soldering & Rework Station bundle with YIHUA 305D-IV Regulated DC Lab Power Supply with Holder, Soldering Cleaning Kit, and Accessories (22 Items)

  • ...ariable regulated power output for your projects.
  • The 862BD+ station essential accessories include: 1 x 50g 0.8mm LEAD-FREE solder wire, 5 x assorted iron tips, 4 x assorted hot air nozzles, 1 x cleaning sponge, 1 x pair ESD-safe tweezers, 1 x solder sucker, 2 x holders, 1 x cleaning kit (brass ball & rosin), 1 x IC extractor.
  • The 862BD+ 2-in-1 professional soldering & rework station: Hot air temperature from 212-896°F, soldering station temperature from 392-896°F. Both the soldering and hot air station has temperature stabilization function to keep your iron at the set temperature steadily for your work.
  • The 305D-IV Regulated DC Lab Power Supply: You can adjust the regulated power output from 0-5A, 0-30V for your work. The unit comes with automatic Constant Voltage & Constant Current mode, short-circuit protection and overcurrent protection to protect the device at work..
  • Quality Assurance: Because you buy directly from the manufacturer, you can enjoy 1-year quality assurance on all our soldering iron/station & rework stations/portable hot air guns. (*consumable product such as soldering iron tips are not covered by the warranty) On top of that, you'll also gain access to our on-demand after sales support on amazon for any troubleshooting/general quer....
Check Stock

YIHUA 8786D-I Soldering & Rework Station bundle with YIHUA 305D-IV Regulated DC Lab Power Supply with Holder, Soldering Cleaning Kit, and Accessories (25 Items)

  • ...tial accessories included) with 305D-IV Regulated DC Lab Power Supply to provide variable regulated power output for your projects.
  • The 8786D-I station essential accessories include: 1 x 50g 0.8mm LEAD-FREE solder wire, 10 x assorted iron tips, 4 x assorted hot air nozzles, 1 x solder wick, 1 x solder sucker, 1 x IC extractor, 1 x grounding wire.
  • The 8786D-I micro-soldering & rework station: Hot air temperature from 212-896°F, soldering station temperature from 392-896°F. Both the soldering and hot air station has temperature stabilization function to keep your iron at the set temperature steadily for your work..
  • The 305D-IV Regulated DC Lab Power Supply: You can adjust the regulated power output from 0-5A, 0-30V for your work. The unit comes with automatic Constant Voltage & Constant Current mode, short-circuit protection and overcurrent protection to protect the device at work..
  • Quality Assurance: Because you buy directly from the manufacturer, you can enjoy 1-year quality assurance on all our soldering iron/station & rework stations/portable hot air guns. (*consumable product such as soldering iron tips are not covered by the warranty) On top of that, you'll also gain access to our on-demand after sales support on amazon for any troubleshooting/gene....
Check Stock

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

  • 【6-in-1 Solder Removal Tool】: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
  • 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
Check Stock

Walton 10253 1/4\

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

Stahl Tools SSVT Variable Temperature Soldering Station

  • [HIGH PRECISION & LARGE POWER]: The solder station has large power and high precision. Power: 60 watts, temperature adjustment range: 194°F 896°F / 90°C 480°C, temperature stability: ±2°F / ±1°C. It’s fast heating up and takes only 6 seconds to reach the melting point of 392°F solder wire. It’s perfect welding equipment..
  • [FEATURES]: Anti-static design & ESD safe, LED display, PID temperature control technology, fast heating, sleep mode & wake function, °C/°F conversion function, indicator for tracking temperature and temperature compensation, digital temperature correction, reusable ceramic core. Ergonomic solder iron handle..
  • [LONG WORKING LIFE]: Protective cord shield, silicone heat shield, and reusable soldering iron extend the service life. Internal 60 watts thermal ceramic soldering iron heater, welded firmly, long service life, easy to replace and purchase. Stainless steel soldering iron prevents accelerate aging of materials for high temperature work, improve heat dissipation and prolong heater life..
  • [SOLDERING KIT INCLUDED]:60-watt digital soldering station with side-mounted solder roller holder (removable), built-in soldering iron holder to ensure soldering iron safety, cleaning Sponge to remove solder residue for future use, 2....
Check Stock