Top Solder Wick

NTE Electronics SW02-10 No-Clean Solder Wick 4 Blue.098 Width 10 Length

  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
  • Available with standard or anti-static bobbins.
Check Stock

Herain No-Clean Solder Wick Desoldering Braided Wicks with Flux Desoldering Wicks Removal Tool Solder Sucker Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components

  • 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption..
  • 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board..
  • 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder..
  • 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station..
  • 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time..
Check Stock

Witonics Capacitor Replacement Kit for Samsung BN44-00197A with Soldering Tools

  • Anti-static solder sucker/desoldering pump (Model#: 2309ZX).
  • 7 high-temperature capacitors, not including the large 400-450V capacitors.
  • 7 inches solder wire (lead-free), 4 inches of solder wick.
Check Stock

Witonics Capacitor Replacement Kit for Samsung BN44-00197A V1 with Soldering Tools

  • Anti-static solder sucker/desoldering pump (Model#: 2309ZX).
  • 16 high-temperature capacitors, not including the large 400-450V capacitors.
  • 7 inches solder wire (lead-free), 4 inches of solder wick.
Check Stock

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

  • Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
  • Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
  • Please check the size carefully before purchasing.
  • Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
  • And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
  • Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
  • Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
  • Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....
Check Stock

Witonics Capacitor Replacement Repair Kit for Samsung LN-T4665F IP-301135A with Soldering Tools

  • Anti-static solder sucker/desoldering pump (Model#: 2309ZX).
  • 17 high-temperature capacitors, not including the large 400-450V capacitors.
  • 7 inches solder wire (lead-free), 4 inches of solder wick.
Check Stock

Blue Solder Sucker Desoldering Pump Sucking Vacuum Desoldering Pump with Teflone Tip 13 Solder Sucker Silicone Desoldering Tool Desoldering Pumps

  • HIGH QUALITY The solder sucker has high quality plastic material, high temperature heat-resisting during long term use. 13 inch long....
  • DESIGN Designed in color blue and orange plastic. Heavy-duty solder remover has anti-skid design. Solder pump is easy to hold and use. Desolder pump....
  • EASY TO USE You can use the desoldering wick pump just by Cocking the pump's mechanism by pushing down on the table with your non-soldering hand.....
  • AMBIDEXTROUS Simple design construction of the solder sucking vacuum makes it comfortable to use with either hand. Everyone can use soldapult easily.
  • SOLDER REMOVAL KIT Use the solder sucker for wide as well as very small and hard to reach places. Desolador can be used to fix all small PCB board....
Check Stock

10 Soldering Accessories Kit Includes 6 Double Sided Soldering Assist Aid Repair Tool Solder Sucker Desoldering Vacuum Pump 2 No-clean Solder Wick Braid Precision Tweezer Iron Sucker Tool Kits

  • Nice combination: package comes with 1 piece desoldering pump, 2 no clean solder wicks, 1 tweezer and 6 welding auxiliary tools, enough quantity and practical tool set for welding and desoldering requirements.
  • Welding auxiliary tools: the tip of the electronic soldering tool is specifically hardened, which can control the soldering tin well even in hot conditions.
  • Besides, ergonomic handle makes it comfortable to grip, labor-saving and time-saving.
  • Simple desoldering pump: light in weight and compact in design makes it easy to use with one hand, thus you can suck up solder easily.
  • Featuring good suction, you can hang on to it and apply your thumb to reset and suck.
  • Nice solder wick: each desolering wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, features quality copper wire with precision braiding design to improve capillary effect and excess solder absorption, leaves little residues after application and non-conductive, no need to remove from boards.
  • Practical tweezer: made of quality stainless steel, sturdy and no rust, this electronic tweezer can assist you in picking up some tiny objects for desoldering work and avoiding hand injuries.
Check Stock

AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick 2.0mm/2.5mm/3.0mm Width 1.5m Length with Flux - Desoldering Vacuum Pump Solder Removal Tool

  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand.
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size.
  • geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs.
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable.
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering.
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size.
Check Stock

Hakko CHP TR-30-58 Medium Soft Wire Cutter, Chamfered Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 8mm Jaw Length, 14 Gauge Max Cutting Capacity

  • Product 1: Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire.
  • Product 1: 2.5mm heat-treated carbon steel construction provides durability and long life.
  • Product 1: Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.
  • Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.
  • Product 2: Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.
  • Product 2: 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
  • Product 2: Available with standard or anti-static bobbins.
Check Stock

MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 3 Meter Length

  • ❤ Package Include - You will get 1 pack No-Clean Solder Braided Wicks.The color of the label is random..
  • ❤ Appropriate Size - The size of the solder wick is 2.5mm x 3m / 0.1inch x 10 ft..
  • ❤ Premium Material - The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder..
  • ❤ Solder Braided Wicks - The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ❤ Applicable Occasions - The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board..
Check Stock

Witonics Capacitor Replacement Kit for Vizio VP50 HDTV10A

  • 19 high-temperature capacitors, not including the large 400-450V capacitors.
  • 7 inches solder wire (lead-free), 4 inches of solder wick.
Check Stock