Top Soldering Enameled Wire

Saker Soldering Iron Kit,60W 110V Corded Electric Welding Gun with Welding Wire,One-handed Operation for Soldering Circuit Boards,Electrical Maintenance,Computers and DIY

  • NEW DESIGN:Saker soldering iron kit the design of the side can always observe the internal operation,it is also convenient to replace the heating core in the future,stainless steel casing,anti-corrosion and more durable..
  • INTEGRATED POWER SWITCH:Saker soldering iron kit has an integrated power switch,which is more energy-saving,safe to operate and use,and does not need to be plugged and unplugged frequently every time..
  • EASY TO USE:When the hand saker soldering iron kit is used for the first time,it must be preheated for a few minutes.It is normal to have smoke,and it will disappear in tens of seconds. Straighten the rated tin wire,press the tin inlet,and insert it from the tin inlet until it contacts the soldering head,until it touches the soldering iron head,stop threading until the tin wire is sent to the tin guide pipe mouth,and then pull the trigger to work normally..
  • ONE-HANDED OPERATION:Saker soldering iron kit feeds the Welding wire through a stepper motor,allowing you to solder effortlessly with one hand Without feeding solder with the other hand,When it is necessary to withdraw or replace the tin wire when it is stopped,just push the plate direction upwards and take out the tin wire at the same time..
Check Stock

Wall Lenk WG991KCS 150/100 Watt Soldering Gun, Small, One Color

  • Medium-duty soldering gun for a variety of soldering applications.
  • Built-in spotlight illuminates the work area.
  • Tip heats up in less than 10 seconds and quick change type tips can be easily changes within 30 seconds.
  • 150/100 Watt, 120 VAC, 2-Wire Professional Soldering Gun, 3 Soldering Tips: Soldering, Smoothing, Cutting, 1/2 Ounce Lead Free Solder.
  • 150/100 120 Vac 2 Wire Professional Soldering Gun.
  • A Medium-Duty Soldering Gun For A Variety Of Soldering Applications.
  • Quick Change Type Tips Can Be Easily Changed Within 30 Seconds.
Check Stock

Soldering Iron Kit,60W Mini Soldering Iron Station Kit with 392℉-896℉ Adjustable Temperature(C/F),TemperatureLock,Fast Heating,10pcs SolderingTips,Solder Bracket,Solder Sucker,Solder Wire

  • 【Upgraded Mini Soldering iron kit 】Do you want to owner a small and portable soldering kit that can be easily taken to the studio or classroom？Ockered Mini Digital Soldering kit can meet your need.1x Built-in soldering iron holder to ensure soldering iron safety, 1xcleaning sponge, Soldering kit with 10 x Additional Soldering Tip, 1x Roll of Lead-free Solder Wire (0.8mm/50g), 1x Brass Tip Cleaner, 1xcurved tweezer,1xdesoldering pump,2xelectronic wire,wire stripper cutter,1x Instruction.
  • 【High Precision & Faster Heating】The Soldering kit has large power and high precision. The solid internal ceramic heating element allows faster heating. Anti-static design & ESD safe, LED display, PID temperature control technology. Adjustable temperature Range: 200℃~480°C/392℉~896℉. It’s fast heating up and takes only 7 seconds to reach the melting point of 392°F solder wire..
  • 【Built-in Transformer & Safe Protection】The professional-grade built-in transformer ensures stability & safety. The soldering kit built-in fuse can prevent the host from being burned out, protect any delicate components, which extends the service life of solder iron. What's more, it comes with the Three-way plug. As we all know, it will be safety than the Two plugs..
Check Stock

U.S. Solid 60W Soldering Station Digital Solder Iron Station Kit with 392°F-896°F Temperature °F /°C Switch Auto Standby & Sleep Temperature Lock 5 x Additional Soldering Tip

  • ✅【12-IN-1 SOLDERING STATION KIT】: The soldering kit includes 1x80W Soldering Iron Station, 5x Soldering Tips, 1x Wire Holder ,1x Solder Wire, 1x Metal Sponge , 2x ESD-Safe Tweezers ,1 x Operation manual, you will get the full kit in the picture..
  • ✅【HIGH POWER & HIGH PRECISION】: The upgraded soldering station is with 80W high power output, fast heating up, and takes only 6 seconds to reach the solder wire melting point of 572°F. Wide working temperature range: 176°F ~ 896°F / 80°C ~ 480°C. The new generation ceramic heating core solved the fast aging and wide temperature change issue. High precision temperature stability(±2°F) gives you more safety to aid in overheating..
  • ✅【AUTO STAND BY &SLEEP FUNCTION】When not used for 10 minutes, the soldering station will automatically switch to standby mode with STB showing on display, when not used for 20 minutes, it will automatically switch to sleep mode with SLP on display. Adjusting the knob or pressing the button to get back to normal working mode. Come with LED screen display function to show temp and different modes..
  • ✅【CERTIFICATIONS & SAFETY】: Safety is one of the most important features we considered during design.The soldering station is FCC, CE, RoHS certified. Also with f....
Check Stock

Soldering Iron Kit Toolour 5-in-1 Automatic Solder Gun Kit 60W Auto Feed Hand-held Welding Tool with Solder Wire, Desoldering Pump, Tweezers for Electronic Repair Circuit Board, Home DIY

  • 【5-in-1 Soldering Gun】Through upgrading and improvement, our automatic soldering gun kit is the most functional, reliable and safe soldering tool. The soldering iron kit, comes with solder gun, desoldering pump, 2 tweezers and solder wire. Our welding tools can meet your daily work and hobby requirements, which is ideal and the perfect helper when connecting components..
  • 【One Hand Operation Solder Gun】The solder iron gun can operate by one hand, no need to point your tin wire and tin gun with all your hands again, completely free your hands. The soldering wire stand ensures the hands-free solder supply during soldering. Natural mica heating core, the soldering iron heat up faster (thermostat range 200 °c - 450 °c), long life, can be replaced, easily assembled and dismantled..
  • 【Desoldering Pump & Anti-static Tweezers】High-quality ABS body is very durable, covered sponge gives you the easy and comfortable way to hold, nylon pump end endure high temperature for a long time use. The de-solder pump helps you remove excess solder from PCB through-hole solder joints. The tweezer is made of high-quality and durable stainless steel, resistant to most acids and other corrosive agents. Plated resistive ESD coating, prevents static damage to ele....
Check Stock

Emtel 18 AWG - 1 lb (460 gr) Copper Magnet Wire - Enameled Wire for Motor, Transformer, Speaker, Magnetic Coil, Winding Wire - Up to 220°C (428°F) - Double (Heavy) Build Insulation Craft Wire - Spool

  • BEST QUALITY RAW MATERIAL: We use high purity of electrolytic A Grade %99.99 pure solid copper wire in our production..
  • HIGH THERMAL RESISTANCE: 18 Gauge Emtel Enameled Wire is Durable to high temperature as up to 220°C (428°F).
  • UL APPROVED: We produce our enameled copper wire according to NEMA MW-1000 requirements. Our UL File Number is E336772. NEMA Approvals: MW35-C and MW37-C High quality!.
  • STRONG INSULATION THICKNESS: EmTherm 18 AWG enameled copper wire has Double (Heavy) Build insulation with Polyesterimide base coat + Polyamideimide top coat..
  • EMTEL MAGNET WIRE QUALITY: Our enamel insulated copper magnet wire is widely used in the production of transformer, wound coil, electric motor, solenoid, inductors coil, speaker coil, electromagnets, tesla coils , craft wire and other science project applications that require tight coils of insulated wire..
Check Stock

SONEAK 60/40 Tin Lead Solder With Rosin Core For Electrical Soldering 1.0mm 50g

  • ★ Tin Lead Solder Wire: High quality Rosin Core Solder Wire.
  • ★ Sn60-Pb40 Solder: Sn 60%- Pb 40%, Flux 2.0%.
  • ★ Lower Melting Point: 361F/183C, easy to be soldered, flows smoothly, soldering fast and strong shiny soldering point.
  • ★ Special Features: This SONEAK 1.0mm solder wire offers lower temperature melting, pretty good flow,clean, less smoke, reliable and nice soldering joint.
  • ★ Applications: Very good soldering capability for electrical soldering, esp DIY project, Home improvement, Maintenance of sterro, toys, TV circuit boards etc. repairing.(Warning: This product can expose you to lead which is know to the State of Califormia to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings website).
Check Stock

MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering 0.8mm 50g

  • √ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire.
  • √ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37).
  • √ Flux content 1.8%，electrical soldering wire dia is 0.8mm (0.0315inch)，gross weight 50gram (0.11lbs),good size for pocket.
  • √ Low Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point..
  • √ Applications: Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc. (WARNING: This product can expose you to lead, which is known to the State of California to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings Website).
Check Stock

SUGON A8 Soldering Iron Station Kit 4 Seconds Rapid Temperature Rise 716°F, 75W Digital Soldering iron Station, 3 Temperature Memory Storage, 392°F-842°F, ℃/°F, 3 Soldering Iron Tips, Auto sleep, LCD

  • 【Fast heating】Soldering iron station is 75W power, heats up quickly from standby temperature to 716°F working temperature in 4 seconds, soldering iron with PID temperature control, control the temperature and rise steadily. as shown in the video..
  • 【Temperature range】Sodering station kit can adjust the temperature range (100℃-450℃, 212℉-842℉), ℃/℉..
  • 【Auto sleep】Put the handle of the digital soldering station into the sleep bracket, the handle immediately enters the sleep state, which can extend the service life of the heating core, and pick up the handle to instantly heat up to the set temperature..
  • 【Unique Design】 Ergonomic digital display soldering station with LCD for temperature adjustment and setting functions, easy operation, and improved work efficiency..
  • 【Soldering Iron Station Kit】 Professional soldering iron station with 3 different types of one-piece heated soldering iron tips, which improves heating speed and replacement operation compared to the separate configuration of the heating element and soldering iron tips. ILS, IS and K Soldering iron tips models can meet your different work needs..
  • 【What you get when you buy an A8 soldering iron station kit】1 *SUGON A8 Soldering Stations，3 * T12 One-piece solder....
Check Stock

Soldering Iron Kit, Putusen 80W Welding Tools with LCD Screen, Adjustable Temperature, ON/Off Switch, Multiple Accessories, Stand and Carrying Bag for Electronics Maintenance

  • CLEAR READOUT: Putusen soldering iron is equipped with LCD display, which shows you current working temperature at a glance. The temperature can be adjusted by turning the temperature adjustment button(range 392 to 842℉). Each time the button is rotated, the temperature will increase/decrease by 50℃, it takes less time to arrive the preset temperature..
  • RAPID HEAT CONDUCTION: With Upgrade 80W Heating Core, this soldering gun can transfer heat faster than other products on the market. Four ventilation holes on tips are featured for quick heat dissipation, they can prevent the soldering iron core from being burned..
  • INCREASED SAFETY: This electric portable soldering iron comes with a upgraded high strength heat resistant handle, which is anti-slip and comfortable to hold. Meanwhile, thick rubber thread is used to make the unit durable, ageing resistant and safety..
  • ACCESSORIES INCLUDED: The soldering iron kit contains: 80W professional digital soldering iron, 5 soldering iron tips, desoldering pump, tweezers, solder wire, electronic wire, wire stripper cutter, clean ball, soldering iron holder, storage bag and user manual. Ideal option for beginners and experts..
  • PUTUSEN GUARANTEE: Since you got Putusen soldering iron set, you will enjoy 2-year-warrant....
Check Stock

Soldering Iron Kit ,Soldering Iron 60W Adjustable Temperature, Digital Multimeter, 5pcs Soldering Tips, Solder Wire, Stand, Desoldering Pump, Solder Wick, Tweezers, Solder Kit Welding Tool

  • 【18-In-1 Soldering Iron】Soldering iron kit comes with soldering iron,Desoldering Pump,Soldering Iron Tips,Soldering Wire,Soldering Iron Stand,Tweezers,Multimeter,Mini Wire Cutter,Electronic Wire,PU Carry Bag,solder paste, heat shrink tubing,pen-shaped screwdriver，electric pen，etc..
  • 【Widely Used】The soldering iron tools are good choice for welding circuit board,Home DIY hobbyists,appliance repair,jewelry welding.It's easy to be used no matter electronics hobbyist or beginner study electronic engineering..
  • 【Premium Quality 】high quality solder iron tool, soldering iron stand with sponge, and all other accessories.
  • reliable adjustable soldering iron with heat-resistant cap and grip and with 5pcs soldering iron tips.
  • 【VERSATILE DIGITAL MULTIMETER】Accurately measures AC/DC Voltage, DC Current, Resistance, and Diode. This Multimeter is a really useful tool for solving industrial and household electrical issues. Suitable for Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc..
  • 【electric pen tester】NON-CONTACT DETECTION of AC voltage in cables, cords, circuit breakers, lighting fixtures, switches, non-tamper-resistant outlets, and wires，VISUAL AN....
Check Stock

Electronic Solder Wire Lead Free Rosin Core Flux 2.5% Diameter 0.06in 1.5mm Gauge 1.76oz 50g Sn99 Ag0.3 Cu0.7 Flows Electric Soldering Unleaded PB Free

  • WIDE SOLDER- the diameter of solder wire is 0.06inch/1.5mm, soldering fast, ideal for drag soldering on MCU, IC, DIP components, make soldering quick, suitable most solder job.
  • ROSIN CORE- great solder with rosin core, easy for soldering, the flux 2.5% is better than others with 2.0% on the flowability.
  • LOW MELTING POINT- the melting temperature is about 419 Deg.F, suitable for all soldering tools.
  • WIDELY APPLICATION- the 0.06in diameter solder wire is common to solder most electronics components or wire, ideal for electrical soldering, repairing, diy.
  • ALLOY SOLDER- contained Sn99, Ag0.3 and Cu0.7, make strong solder joint, 0.3% silver is important for electrical conductivity, excellent for soldering.
Check Stock